mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 02:16:45 +07:00
751ca3aa15
MP8867 is an I2C-controlled adjustable voltage regulator made by Monolithic Power Systems. The difference between MP8867 and MP8869 are: 1.If V_BOOT, the vref of MP8869 is fixed at 600mv while vref of MP8867 is determined by the I2C control. 2.For MP8867, when setting voltage, if the step is within 5, we need to manually set the GO BIT to 0. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200316223127.4b1ecc92@xhacker Signed-off-by: Mark Brown <broonie@kernel.org>
291 lines
6.9 KiB
C
291 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// MP8867/MP8869 regulator driver
|
|
//
|
|
// Copyright (C) 2020 Synaptics Incorporated
|
|
//
|
|
// Author: Jisheng Zhang <jszhang@kernel.org>
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define MP886X_VSEL 0x00
|
|
#define MP886X_V_BOOT (1 << 7)
|
|
#define MP886X_SYSCNTLREG1 0x01
|
|
#define MP886X_MODE (1 << 0)
|
|
#define MP886X_GO (1 << 6)
|
|
#define MP886X_EN (1 << 7)
|
|
|
|
struct mp886x_device_info {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct regulator_init_data *regulator;
|
|
struct gpio_desc *en_gpio;
|
|
u32 r[2];
|
|
unsigned int sel;
|
|
};
|
|
|
|
static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
|
|
MP886X_MODE, MP886X_MODE);
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
|
|
MP886X_MODE, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int mp886x_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, MP886X_SYSCNTLREG1, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (val & MP886X_MODE)
|
|
return REGULATOR_MODE_FAST;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int mp8869_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
|
|
MP886X_GO, MP886X_GO);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
sel <<= ffs(rdev->desc->vsel_mask) - 1;
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
|
|
MP886X_V_BOOT | rdev->desc->vsel_mask, sel);
|
|
}
|
|
|
|
static inline unsigned int mp8869_scale(unsigned int uv, u32 r1, u32 r2)
|
|
{
|
|
u32 tmp = uv * r1 / r2;
|
|
|
|
return uv + tmp;
|
|
}
|
|
|
|
static int mp8869_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct mp886x_device_info *di = rdev_get_drvdata(rdev);
|
|
int ret, uv;
|
|
unsigned int val;
|
|
bool fbloop;
|
|
|
|
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
fbloop = val & MP886X_V_BOOT;
|
|
if (fbloop) {
|
|
uv = rdev->desc->min_uV;
|
|
uv = mp8869_scale(uv, di->r[0], di->r[1]);
|
|
return regulator_map_voltage_linear(rdev, uv, uv);
|
|
}
|
|
|
|
val &= rdev->desc->vsel_mask;
|
|
val >>= ffs(rdev->desc->vsel_mask) - 1;
|
|
|
|
return val;
|
|
}
|
|
|
|
static const struct regulator_ops mp8869_regulator_ops = {
|
|
.set_voltage_sel = mp8869_set_voltage_sel,
|
|
.get_voltage_sel = mp8869_get_voltage_sel,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_mode = mp886x_set_mode,
|
|
.get_mode = mp886x_get_mode,
|
|
};
|
|
|
|
static int mp8867_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
|
|
{
|
|
struct mp886x_device_info *di = rdev_get_drvdata(rdev);
|
|
int ret, delta;
|
|
|
|
ret = mp8869_set_voltage_sel(rdev, sel);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
delta = di->sel - sel;
|
|
if (abs(delta) <= 5)
|
|
ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
|
|
MP886X_GO, 0);
|
|
di->sel = sel;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mp8867_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct mp886x_device_info *di = rdev_get_drvdata(rdev);
|
|
int ret, uv;
|
|
unsigned int val;
|
|
bool fbloop;
|
|
|
|
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
fbloop = val & MP886X_V_BOOT;
|
|
|
|
val &= rdev->desc->vsel_mask;
|
|
val >>= ffs(rdev->desc->vsel_mask) - 1;
|
|
|
|
if (fbloop) {
|
|
uv = regulator_list_voltage_linear(rdev, val);
|
|
uv = mp8869_scale(uv, di->r[0], di->r[1]);
|
|
return regulator_map_voltage_linear(rdev, uv, uv);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static const struct regulator_ops mp8867_regulator_ops = {
|
|
.set_voltage_sel = mp8867_set_voltage_sel,
|
|
.get_voltage_sel = mp8867_get_voltage_sel,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_mode = mp886x_set_mode,
|
|
.get_mode = mp886x_get_mode,
|
|
};
|
|
|
|
static int mp886x_regulator_register(struct mp886x_device_info *di,
|
|
struct regulator_config *config)
|
|
{
|
|
struct regulator_desc *rdesc = &di->desc;
|
|
struct regulator_dev *rdev;
|
|
|
|
rdesc->name = "mp886x-reg";
|
|
rdesc->supply_name = "vin";
|
|
rdesc->ops = of_device_get_match_data(di->dev);
|
|
rdesc->type = REGULATOR_VOLTAGE;
|
|
rdesc->n_voltages = 128;
|
|
rdesc->enable_reg = MP886X_SYSCNTLREG1;
|
|
rdesc->enable_mask = MP886X_EN;
|
|
rdesc->min_uV = 600000;
|
|
rdesc->uV_step = 10000;
|
|
rdesc->vsel_reg = MP886X_VSEL;
|
|
rdesc->vsel_mask = 0x3f;
|
|
rdesc->owner = THIS_MODULE;
|
|
|
|
rdev = devm_regulator_register(di->dev, &di->desc, config);
|
|
if (IS_ERR(rdev))
|
|
return PTR_ERR(rdev);
|
|
di->sel = rdesc->ops->get_voltage_sel(rdev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config mp886x_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static int mp886x_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct mp886x_device_info *di;
|
|
struct regulator_config config = { };
|
|
struct regmap *regmap;
|
|
int ret;
|
|
|
|
di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL);
|
|
if (!di)
|
|
return -ENOMEM;
|
|
|
|
di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
|
|
if (!di->regulator) {
|
|
dev_err(dev, "Platform data not found!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32_array(np, "mps,fb-voltage-divider",
|
|
di->r, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
di->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(di->en_gpio))
|
|
return PTR_ERR(di->en_gpio);
|
|
|
|
di->dev = dev;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(dev, "Failed to allocate regmap!\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
i2c_set_clientdata(client, di);
|
|
|
|
config.dev = di->dev;
|
|
config.init_data = di->regulator;
|
|
config.regmap = regmap;
|
|
config.driver_data = di;
|
|
config.of_node = np;
|
|
|
|
ret = mp886x_regulator_register(di, &config);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to register regulator!\n");
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id mp886x_dt_ids[] = {
|
|
{
|
|
.compatible = "mps,mp8867",
|
|
.data = &mp8867_regulator_ops
|
|
},
|
|
{
|
|
.compatible = "mps,mp8869",
|
|
.data = &mp8869_regulator_ops
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mp886x_dt_ids);
|
|
|
|
static const struct i2c_device_id mp886x_id[] = {
|
|
{ "mp886x", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mp886x_id);
|
|
|
|
static struct i2c_driver mp886x_regulator_driver = {
|
|
.driver = {
|
|
.name = "mp886x-regulator",
|
|
.of_match_table = of_match_ptr(mp886x_dt_ids),
|
|
},
|
|
.probe = mp886x_i2c_probe,
|
|
.id_table = mp886x_id,
|
|
};
|
|
module_i2c_driver(mp886x_regulator_driver);
|
|
|
|
MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
|
|
MODULE_DESCRIPTION("MP886x regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|