mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
95e339b6e8
Add support for STM32H7 Analog to Digital Converter. It has up to 20 external channels, resolution ranges from 8 to 16bits. Either bus or asynchronous adc clock may be used. Add registers & bitfields definition. Also add new configuration options to enter/exit powerdown and perform self-calibration. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
532 lines
14 KiB
C
532 lines
14 KiB
C
/*
|
|
* This file is part of STM32 ADC driver
|
|
*
|
|
* Copyright (C) 2016, STMicroelectronics - All Rights Reserved
|
|
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
|
|
*
|
|
* Inspired from: fsl-imx25-tsadc
|
|
*
|
|
* License type: GPLv2
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE.
|
|
* See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "stm32-adc-core.h"
|
|
|
|
/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
|
|
#define STM32F4_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
|
|
#define STM32F4_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x04)
|
|
|
|
/* STM32F4_ADC_CSR - bit fields */
|
|
#define STM32F4_EOC3 BIT(17)
|
|
#define STM32F4_EOC2 BIT(9)
|
|
#define STM32F4_EOC1 BIT(1)
|
|
|
|
/* STM32F4_ADC_CCR - bit fields */
|
|
#define STM32F4_ADC_ADCPRE_SHIFT 16
|
|
#define STM32F4_ADC_ADCPRE_MASK GENMASK(17, 16)
|
|
|
|
/* STM32 F4 maximum analog clock rate (from datasheet) */
|
|
#define STM32F4_ADC_MAX_CLK_RATE 36000000
|
|
|
|
/* STM32H7 - common registers for all ADC instances */
|
|
#define STM32H7_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
|
|
#define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08)
|
|
|
|
/* STM32H7_ADC_CSR - bit fields */
|
|
#define STM32H7_EOC_SLV BIT(18)
|
|
#define STM32H7_EOC_MST BIT(2)
|
|
|
|
/* STM32H7_ADC_CCR - bit fields */
|
|
#define STM32H7_PRESC_SHIFT 18
|
|
#define STM32H7_PRESC_MASK GENMASK(21, 18)
|
|
#define STM32H7_CKMODE_SHIFT 16
|
|
#define STM32H7_CKMODE_MASK GENMASK(17, 16)
|
|
|
|
/* STM32 H7 maximum analog clock rate (from datasheet) */
|
|
#define STM32H7_ADC_MAX_CLK_RATE 72000000
|
|
|
|
/**
|
|
* stm32_adc_common_regs - stm32 common registers, compatible dependent data
|
|
* @csr: common status register offset
|
|
* @eoc1: adc1 end of conversion flag in @csr
|
|
* @eoc2: adc2 end of conversion flag in @csr
|
|
* @eoc3: adc3 end of conversion flag in @csr
|
|
*/
|
|
struct stm32_adc_common_regs {
|
|
u32 csr;
|
|
u32 eoc1_msk;
|
|
u32 eoc2_msk;
|
|
u32 eoc3_msk;
|
|
};
|
|
|
|
struct stm32_adc_priv;
|
|
|
|
/**
|
|
* stm32_adc_priv_cfg - stm32 core compatible configuration data
|
|
* @regs: common registers for all instances
|
|
* @clk_sel: clock selection routine
|
|
*/
|
|
struct stm32_adc_priv_cfg {
|
|
const struct stm32_adc_common_regs *regs;
|
|
int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
|
|
};
|
|
|
|
/**
|
|
* struct stm32_adc_priv - stm32 ADC core private data
|
|
* @irq: irq for ADC block
|
|
* @domain: irq domain reference
|
|
* @aclk: clock reference for the analog circuitry
|
|
* @bclk: bus clock common for all ADCs, depends on part used
|
|
* @vref: regulator reference
|
|
* @cfg: compatible configuration data
|
|
* @common: common data for all ADC instances
|
|
*/
|
|
struct stm32_adc_priv {
|
|
int irq;
|
|
struct irq_domain *domain;
|
|
struct clk *aclk;
|
|
struct clk *bclk;
|
|
struct regulator *vref;
|
|
const struct stm32_adc_priv_cfg *cfg;
|
|
struct stm32_adc_common common;
|
|
};
|
|
|
|
static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
|
|
{
|
|
return container_of(com, struct stm32_adc_priv, common);
|
|
}
|
|
|
|
/* STM32F4 ADC internal common clock prescaler division ratios */
|
|
static int stm32f4_pclk_div[] = {2, 4, 6, 8};
|
|
|
|
/**
|
|
* stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
|
|
* @priv: stm32 ADC core private data
|
|
* Select clock prescaler used for analog conversions, before using ADC.
|
|
*/
|
|
static int stm32f4_adc_clk_sel(struct platform_device *pdev,
|
|
struct stm32_adc_priv *priv)
|
|
{
|
|
unsigned long rate;
|
|
u32 val;
|
|
int i;
|
|
|
|
/* stm32f4 has one clk input for analog (mandatory), enforce it here */
|
|
if (!priv->aclk) {
|
|
dev_err(&pdev->dev, "No 'adc' clock found\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
rate = clk_get_rate(priv->aclk);
|
|
for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
|
|
if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
|
|
break;
|
|
}
|
|
if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
|
|
dev_err(&pdev->dev, "adc clk selection failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->common.rate = rate;
|
|
val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
|
|
val &= ~STM32F4_ADC_ADCPRE_MASK;
|
|
val |= i << STM32F4_ADC_ADCPRE_SHIFT;
|
|
writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
|
|
|
|
dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
|
|
rate / (stm32f4_pclk_div[i] * 1000));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* struct stm32h7_adc_ck_spec - specification for stm32h7 adc clock
|
|
* @ckmode: ADC clock mode, Async or sync with prescaler.
|
|
* @presc: prescaler bitfield for async clock mode
|
|
* @div: prescaler division ratio
|
|
*/
|
|
struct stm32h7_adc_ck_spec {
|
|
u32 ckmode;
|
|
u32 presc;
|
|
int div;
|
|
};
|
|
|
|
const struct stm32h7_adc_ck_spec stm32h7_adc_ckmodes_spec[] = {
|
|
/* 00: CK_ADC[1..3]: Asynchronous clock modes */
|
|
{ 0, 0, 1 },
|
|
{ 0, 1, 2 },
|
|
{ 0, 2, 4 },
|
|
{ 0, 3, 6 },
|
|
{ 0, 4, 8 },
|
|
{ 0, 5, 10 },
|
|
{ 0, 6, 12 },
|
|
{ 0, 7, 16 },
|
|
{ 0, 8, 32 },
|
|
{ 0, 9, 64 },
|
|
{ 0, 10, 128 },
|
|
{ 0, 11, 256 },
|
|
/* HCLK used: Synchronous clock modes (1, 2 or 4 prescaler) */
|
|
{ 1, 0, 1 },
|
|
{ 2, 0, 2 },
|
|
{ 3, 0, 4 },
|
|
};
|
|
|
|
static int stm32h7_adc_clk_sel(struct platform_device *pdev,
|
|
struct stm32_adc_priv *priv)
|
|
{
|
|
u32 ckmode, presc, val;
|
|
unsigned long rate;
|
|
int i, div;
|
|
|
|
/* stm32h7 bus clock is common for all ADC instances (mandatory) */
|
|
if (!priv->bclk) {
|
|
dev_err(&pdev->dev, "No 'bus' clock found\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
/*
|
|
* stm32h7 can use either 'bus' or 'adc' clock for analog circuitry.
|
|
* So, choice is to have bus clock mandatory and adc clock optional.
|
|
* If optional 'adc' clock has been found, then try to use it first.
|
|
*/
|
|
if (priv->aclk) {
|
|
/*
|
|
* Asynchronous clock modes (e.g. ckmode == 0)
|
|
* From spec: PLL output musn't exceed max rate
|
|
*/
|
|
rate = clk_get_rate(priv->aclk);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
|
|
ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
|
|
presc = stm32h7_adc_ckmodes_spec[i].presc;
|
|
div = stm32h7_adc_ckmodes_spec[i].div;
|
|
|
|
if (ckmode)
|
|
continue;
|
|
|
|
if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Synchronous clock modes (e.g. ckmode is 1, 2 or 3) */
|
|
rate = clk_get_rate(priv->bclk);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
|
|
ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
|
|
presc = stm32h7_adc_ckmodes_spec[i].presc;
|
|
div = stm32h7_adc_ckmodes_spec[i].div;
|
|
|
|
if (!ckmode)
|
|
continue;
|
|
|
|
if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
|
|
goto out;
|
|
}
|
|
|
|
dev_err(&pdev->dev, "adc clk selection failed\n");
|
|
return -EINVAL;
|
|
|
|
out:
|
|
/* rate used later by each ADC instance to control BOOST mode */
|
|
priv->common.rate = rate;
|
|
|
|
/* Set common clock mode and prescaler */
|
|
val = readl_relaxed(priv->common.base + STM32H7_ADC_CCR);
|
|
val &= ~(STM32H7_CKMODE_MASK | STM32H7_PRESC_MASK);
|
|
val |= ckmode << STM32H7_CKMODE_SHIFT;
|
|
val |= presc << STM32H7_PRESC_SHIFT;
|
|
writel_relaxed(val, priv->common.base + STM32H7_ADC_CCR);
|
|
|
|
dev_dbg(&pdev->dev, "Using %s clock/%d source at %ld kHz\n",
|
|
ckmode ? "bus" : "adc", div, rate / (div * 1000));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* STM32F4 common registers definitions */
|
|
static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
|
|
.csr = STM32F4_ADC_CSR,
|
|
.eoc1_msk = STM32F4_EOC1,
|
|
.eoc2_msk = STM32F4_EOC2,
|
|
.eoc3_msk = STM32F4_EOC3,
|
|
};
|
|
|
|
/* STM32H7 common registers definitions */
|
|
static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
|
|
.csr = STM32H7_ADC_CSR,
|
|
.eoc1_msk = STM32H7_EOC_MST,
|
|
.eoc2_msk = STM32H7_EOC_SLV,
|
|
};
|
|
|
|
/* ADC common interrupt for all instances */
|
|
static void stm32_adc_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
u32 status;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
status = readl_relaxed(priv->common.base + priv->cfg->regs->csr);
|
|
|
|
if (status & priv->cfg->regs->eoc1_msk)
|
|
generic_handle_irq(irq_find_mapping(priv->domain, 0));
|
|
|
|
if (status & priv->cfg->regs->eoc2_msk)
|
|
generic_handle_irq(irq_find_mapping(priv->domain, 1));
|
|
|
|
if (status & priv->cfg->regs->eoc3_msk)
|
|
generic_handle_irq(irq_find_mapping(priv->domain, 2));
|
|
|
|
chained_irq_exit(chip, desc);
|
|
};
|
|
|
|
static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
irq_set_chip_data(irq, d->host_data);
|
|
irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
}
|
|
|
|
static const struct irq_domain_ops stm32_adc_domain_ops = {
|
|
.map = stm32_adc_domain_map,
|
|
.unmap = stm32_adc_domain_unmap,
|
|
.xlate = irq_domain_xlate_onecell,
|
|
};
|
|
|
|
static int stm32_adc_irq_probe(struct platform_device *pdev,
|
|
struct stm32_adc_priv *priv)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
if (priv->irq < 0) {
|
|
dev_err(&pdev->dev, "failed to get irq\n");
|
|
return priv->irq;
|
|
}
|
|
|
|
priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
|
|
&stm32_adc_domain_ops,
|
|
priv);
|
|
if (!priv->domain) {
|
|
dev_err(&pdev->dev, "Failed to add irq domain\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
|
|
irq_set_handler_data(priv->irq, priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_adc_irq_remove(struct platform_device *pdev,
|
|
struct stm32_adc_priv *priv)
|
|
{
|
|
int hwirq;
|
|
|
|
for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
|
|
irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
|
|
irq_domain_remove(priv->domain);
|
|
irq_set_chained_handler(priv->irq, NULL);
|
|
}
|
|
|
|
static int stm32_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct stm32_adc_priv *priv;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
if (!pdev->dev.of_node)
|
|
return -ENODEV;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->cfg = (const struct stm32_adc_priv_cfg *)
|
|
of_match_device(dev->driver->of_match_table, dev)->data;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->common.base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(priv->common.base))
|
|
return PTR_ERR(priv->common.base);
|
|
priv->common.phys_base = res->start;
|
|
|
|
priv->vref = devm_regulator_get(&pdev->dev, "vref");
|
|
if (IS_ERR(priv->vref)) {
|
|
ret = PTR_ERR(priv->vref);
|
|
dev_err(&pdev->dev, "vref get failed, %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_enable(priv->vref);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "vref enable failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_get_voltage(priv->vref);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
|
|
goto err_regulator_disable;
|
|
}
|
|
priv->common.vref_mv = ret / 1000;
|
|
dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
|
|
|
|
priv->aclk = devm_clk_get(&pdev->dev, "adc");
|
|
if (IS_ERR(priv->aclk)) {
|
|
ret = PTR_ERR(priv->aclk);
|
|
if (ret == -ENOENT) {
|
|
priv->aclk = NULL;
|
|
} else {
|
|
dev_err(&pdev->dev, "Can't get 'adc' clock\n");
|
|
goto err_regulator_disable;
|
|
}
|
|
}
|
|
|
|
if (priv->aclk) {
|
|
ret = clk_prepare_enable(priv->aclk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "adc clk enable failed\n");
|
|
goto err_regulator_disable;
|
|
}
|
|
}
|
|
|
|
priv->bclk = devm_clk_get(&pdev->dev, "bus");
|
|
if (IS_ERR(priv->bclk)) {
|
|
ret = PTR_ERR(priv->bclk);
|
|
if (ret == -ENOENT) {
|
|
priv->bclk = NULL;
|
|
} else {
|
|
dev_err(&pdev->dev, "Can't get 'bus' clock\n");
|
|
goto err_aclk_disable;
|
|
}
|
|
}
|
|
|
|
if (priv->bclk) {
|
|
ret = clk_prepare_enable(priv->bclk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "adc clk enable failed\n");
|
|
goto err_aclk_disable;
|
|
}
|
|
}
|
|
|
|
ret = priv->cfg->clk_sel(pdev, priv);
|
|
if (ret < 0)
|
|
goto err_bclk_disable;
|
|
|
|
ret = stm32_adc_irq_probe(pdev, priv);
|
|
if (ret < 0)
|
|
goto err_bclk_disable;
|
|
|
|
platform_set_drvdata(pdev, &priv->common);
|
|
|
|
ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to populate DT children\n");
|
|
goto err_irq_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_irq_remove:
|
|
stm32_adc_irq_remove(pdev, priv);
|
|
|
|
err_bclk_disable:
|
|
if (priv->bclk)
|
|
clk_disable_unprepare(priv->bclk);
|
|
|
|
err_aclk_disable:
|
|
if (priv->aclk)
|
|
clk_disable_unprepare(priv->aclk);
|
|
|
|
err_regulator_disable:
|
|
regulator_disable(priv->vref);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct stm32_adc_common *common = platform_get_drvdata(pdev);
|
|
struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
|
|
|
|
of_platform_depopulate(&pdev->dev);
|
|
stm32_adc_irq_remove(pdev, priv);
|
|
if (priv->bclk)
|
|
clk_disable_unprepare(priv->bclk);
|
|
if (priv->aclk)
|
|
clk_disable_unprepare(priv->aclk);
|
|
regulator_disable(priv->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
|
|
.regs = &stm32f4_adc_common_regs,
|
|
.clk_sel = stm32f4_adc_clk_sel,
|
|
};
|
|
|
|
static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
|
|
.regs = &stm32h7_adc_common_regs,
|
|
.clk_sel = stm32h7_adc_clk_sel,
|
|
};
|
|
|
|
static const struct of_device_id stm32_adc_of_match[] = {
|
|
{
|
|
.compatible = "st,stm32f4-adc-core",
|
|
.data = (void *)&stm32f4_adc_priv_cfg
|
|
}, {
|
|
.compatible = "st,stm32h7-adc-core",
|
|
.data = (void *)&stm32h7_adc_priv_cfg
|
|
}, {
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
|
|
|
|
static struct platform_driver stm32_adc_driver = {
|
|
.probe = stm32_adc_probe,
|
|
.remove = stm32_adc_remove,
|
|
.driver = {
|
|
.name = "stm32-adc-core",
|
|
.of_match_table = stm32_adc_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(stm32_adc_driver);
|
|
|
|
MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics STM32 ADC core driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:stm32-adc-core");
|