mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 02:35:23 +07:00
25d6463e48
On many MIPS systems the endianness of IP blocks is kept the same as that of the CPU by the hardware. This includes the system controllers on these systems which are controlled via syscon which uses the regmap API which used readl() and writel() to interact with the hardware, meaning that all writes are converted to little endian when writing to the hardware. This caused a bad interaction with the regmap core in big endian mode since it was not aware of the byte swapping and so ended up performing little endian writes. Unfortunately when this issue was noticed it was addressed by updating the DT for the affected devices to specify them as little endian. This happened to work since it resulted in two endianness swaps which cancelled each other out and gave little endian behaviour but meant that the DT was clearly not accurately describing the hardware. The intention of commit29bb45f25f(regmap-mmio: Use native endianness for read/write) was to fix this by making regmap default to native endianness but this breaks most other MMIO users where the hardware has a fixed endianness and the implementation uses the __raw accessors which are not intended to be used outside of architecture code. Instead use the newly added native-endian DT property to say exactly what we want for these systems. Fixes:29bb45f25f(regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Ralf Baechle <ralf@linux-mips.org>
246 lines
5.3 KiB
Plaintext
246 lines
5.3 KiB
Plaintext
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm7358";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mips-hpt-frequency = <375000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bmips3300";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
uart0 = &uart0;
|
|
uart1 = &uart1;
|
|
uart2 = &uart2;
|
|
};
|
|
|
|
cpu_intc: cpu_intc {
|
|
#address-cells = <0>;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
clocks {
|
|
uart_clk: uart_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <81000000>;
|
|
};
|
|
};
|
|
|
|
rdb {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "simple-bus";
|
|
ranges = <0 0x10000000 0x01000000>;
|
|
|
|
periph_intc: periph_intc@411400 {
|
|
compatible = "brcm,bcm7038-l1-intc";
|
|
reg = <0x411400 0x30>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>;
|
|
};
|
|
|
|
sun_l2_intc: sun_l2_intc@403000 {
|
|
compatible = "brcm,l2-intc";
|
|
reg = <0x403000 0x30>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <48>;
|
|
};
|
|
|
|
gisb-arb@400000 {
|
|
compatible = "brcm,bcm7400-gisb-arb";
|
|
reg = <0x400000 0xdc>;
|
|
native-endian;
|
|
interrupt-parent = <&sun_l2_intc>;
|
|
interrupts = <0>, <2>;
|
|
brcm,gisb-arb-master-mask = <0x2f3>;
|
|
brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
|
|
"rdc_0", "raaga_0",
|
|
"avd_0", "jtag_0";
|
|
};
|
|
|
|
upg_irq0_intc: upg_irq0_intc@406600 {
|
|
compatible = "brcm,bcm7120-l2-intc";
|
|
reg = <0x406600 0x8>;
|
|
|
|
brcm,int-map-mask = <0x44>, <0x7000000>;
|
|
brcm,int-fwd-mask = <0x70000>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <56>, <54>;
|
|
interrupt-names = "upg_main", "upg_bsc";
|
|
};
|
|
|
|
upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
|
|
compatible = "brcm,bcm7120-l2-intc";
|
|
reg = <0x408b80 0x8>;
|
|
|
|
brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
|
|
brcm,int-fwd-mask = <0>;
|
|
brcm,irq-can-wake;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <57>, <55>, <59>;
|
|
interrupt-names = "upg_main_aon", "upg_bsc_aon",
|
|
"upg_spi";
|
|
};
|
|
|
|
sun_top_ctrl: syscon@404000 {
|
|
compatible = "brcm,bcm7358-sun-top-ctrl", "syscon";
|
|
reg = <0x404000 0x51c>;
|
|
native-endian;
|
|
};
|
|
|
|
reboot {
|
|
compatible = "brcm,brcmstb-reboot";
|
|
syscon = <&sun_top_ctrl 0x304 0x308>;
|
|
};
|
|
|
|
uart0: serial@406800 {
|
|
compatible = "ns16550a";
|
|
reg = <0x406800 0x20>;
|
|
reg-io-width = <0x4>;
|
|
reg-shift = <0x2>;
|
|
native-endian;
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <61>;
|
|
clocks = <&uart_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@406840 {
|
|
compatible = "ns16550a";
|
|
reg = <0x406840 0x20>;
|
|
reg-io-width = <0x4>;
|
|
reg-shift = <0x2>;
|
|
native-endian;
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <62>;
|
|
clocks = <&uart_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@406880 {
|
|
compatible = "ns16550a";
|
|
reg = <0x406880 0x20>;
|
|
reg-io-width = <0x4>;
|
|
reg-shift = <0x2>;
|
|
native-endian;
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <63>;
|
|
clocks = <&uart_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
bsca: i2c@406200 {
|
|
clock-frequency = <390000>;
|
|
compatible = "brcm,brcmstb-i2c";
|
|
interrupt-parent = <&upg_irq0_intc>;
|
|
reg = <0x406200 0x58>;
|
|
interrupts = <24>;
|
|
interrupt-names = "upg_bsca";
|
|
status = "disabled";
|
|
};
|
|
|
|
bscb: i2c@406280 {
|
|
clock-frequency = <390000>;
|
|
compatible = "brcm,brcmstb-i2c";
|
|
interrupt-parent = <&upg_irq0_intc>;
|
|
reg = <0x406280 0x58>;
|
|
interrupts = <25>;
|
|
interrupt-names = "upg_bscb";
|
|
status = "disabled";
|
|
};
|
|
|
|
bscc: i2c@406300 {
|
|
clock-frequency = <390000>;
|
|
compatible = "brcm,brcmstb-i2c";
|
|
interrupt-parent = <&upg_irq0_intc>;
|
|
reg = <0x406300 0x58>;
|
|
interrupts = <26>;
|
|
interrupt-names = "upg_bscc";
|
|
status = "disabled";
|
|
};
|
|
|
|
bscd: i2c@408980 {
|
|
clock-frequency = <390000>;
|
|
compatible = "brcm,brcmstb-i2c";
|
|
interrupt-parent = <&upg_aon_irq0_intc>;
|
|
reg = <0x408980 0x58>;
|
|
interrupts = <27>;
|
|
interrupt-names = "upg_bscd";
|
|
status = "disabled";
|
|
};
|
|
|
|
enet0: ethernet@430000 {
|
|
phy-mode = "internal";
|
|
phy-handle = <&phy1>;
|
|
mac-address = [ 00 10 18 36 23 1a ];
|
|
compatible = "brcm,genet-v2";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
reg = <0x430000 0x4c8c>;
|
|
interrupts = <24>, <25>;
|
|
interrupt-parent = <&periph_intc>;
|
|
status = "disabled";
|
|
|
|
mdio@e14 {
|
|
compatible = "brcm,genet-mdio-v2";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
reg = <0xe14 0x8>;
|
|
|
|
phy1: ethernet-phy@1 {
|
|
max-speed = <100>;
|
|
reg = <0x1>;
|
|
compatible = "brcm,40nm-ephy",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
};
|
|
};
|
|
};
|
|
|
|
ehci0: usb@480300 {
|
|
compatible = "brcm,bcm7358-ehci", "generic-ehci";
|
|
reg = <0x480300 0x100>;
|
|
native-endian;
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <65>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@480400 {
|
|
compatible = "brcm,bcm7358-ohci", "generic-ohci";
|
|
reg = <0x480400 0x100>;
|
|
native-endian;
|
|
no-big-frame-no;
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <66>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|