linux_dsm_epyc7002/arch/ia64/kernel/minstate.h
Luis R. Rodriguez e55645ec57 ia64: remove paravirt code
All the ia64 pvops code is now dead code since both
xen and kvm support have been ripped out [0] [1]. Just
that no one had troubled to rip this stuff out. The only
useful remaining pieces were the old pvops docs but that
was recently also generalized and moved out from ia64 [2].

This has been run time tested on an ia64 Madison system.

[0] 003f7de625 "KVM: ia64: remove" since v3.19-rc1
[1] d52eefb47d "ia64/xen: Remove Xen support for ia64" since v3.14-rc1
[2] "virtual: Documentation: simplify and generalize paravirt_ops.txt"

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-06-10 14:26:32 -07:00

251 lines
8.0 KiB
C

#include <asm/cache.h>
#include "entry.h"
#include <asm/native/inst.h>
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/* read ar.itc in advance, and use it before leaving bank 0 */
#define ACCOUNT_GET_STAMP \
(pUStk) mov.m r20=ar.itc;
#define ACCOUNT_SYS_ENTER \
(pUStk) br.call.spnt rp=account_sys_enter \
;;
#else
#define ACCOUNT_GET_STAMP
#define ACCOUNT_SYS_ENTER
#endif
.section ".data..patch.rse", "a"
.previous
/*
* DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
* the minimum state necessary that allows us to turn psr.ic back
* on.
*
* Assumed state upon entry:
* psr.ic: off
* r31: contains saved predicates (pr)
*
* Upon exit, the state is as follows:
* psr.ic: off
* r2 = points to &pt_regs.r16
* r8 = contents of ar.ccv
* r9 = contents of ar.csd
* r10 = contents of ar.ssd
* r11 = FPSR_DEFAULT
* r12 = kernel sp (kernel virtual address)
* r13 = points to current task_struct (kernel virtual address)
* p15 = TRUE if psr.i is set in cr.ipsr
* predicate registers (other than p2, p3, and p15), b6, r3, r14, r15:
* preserved
*
* Note that psr.ic is NOT turned on by this macro. This is so that
* we can pass interruption state as arguments to a handler.
*/
#define IA64_NATIVE_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND) \
mov r16=IA64_KR(CURRENT); /* M */ \
mov r27=ar.rsc; /* M */ \
mov r20=r1; /* A */ \
mov r25=ar.unat; /* M */ \
MOV_FROM_IPSR(p0,r29); /* M */ \
mov r26=ar.pfs; /* I */ \
MOV_FROM_IIP(r28); /* M */ \
mov r21=ar.fpsr; /* M */ \
__COVER; /* B;; (or nothing) */ \
;; \
adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16; \
;; \
ld1 r17=[r16]; /* load current->thread.on_ustack flag */ \
st1 [r16]=r0; /* clear current->thread.on_ustack flag */ \
adds r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 \
/* switch from user to kernel RBS: */ \
;; \
invala; /* M */ \
SAVE_IFS; \
cmp.eq pKStk,pUStk=r0,r17; /* are we in kernel mode already? */ \
;; \
(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \
;; \
(pUStk) mov.m r24=ar.rnat; \
(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \
(pKStk) mov r1=sp; /* get sp */ \
;; \
(pUStk) lfetch.fault.excl.nt1 [r22]; \
(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \
(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \
;; \
(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \
(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \
;; \
(pUStk) mov r18=ar.bsp; \
(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \
adds r17=2*L1_CACHE_BYTES,r1; /* really: biggest cache-line size */ \
adds r16=PT(CR_IPSR),r1; \
;; \
lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES; \
st8 [r16]=r29; /* save cr.ipsr */ \
;; \
lfetch.fault.excl.nt1 [r17]; \
tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \
mov r29=b0 \
;; \
WORKAROUND; \
adds r16=PT(R8),r1; /* initialize first base pointer */ \
adds r17=PT(R9),r1; /* initialize second base pointer */ \
(pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r8,16; \
.mem.offset 8,0; st8.spill [r17]=r9,16; \
;; \
.mem.offset 0,0; st8.spill [r16]=r10,24; \
.mem.offset 8,0; st8.spill [r17]=r11,24; \
;; \
st8 [r16]=r28,16; /* save cr.iip */ \
st8 [r17]=r30,16; /* save cr.ifs */ \
(pUStk) sub r18=r18,r22; /* r18=RSE.ndirty*8 */ \
mov r8=ar.ccv; \
mov r9=ar.csd; \
mov r10=ar.ssd; \
movl r11=FPSR_DEFAULT; /* L-unit */ \
;; \
st8 [r16]=r25,16; /* save ar.unat */ \
st8 [r17]=r26,16; /* save ar.pfs */ \
shl r18=r18,16; /* compute ar.rsc to be used for "loadrs" */ \
;; \
st8 [r16]=r27,16; /* save ar.rsc */ \
(pUStk) st8 [r17]=r24,16; /* save ar.rnat */ \
(pKStk) adds r17=16,r17; /* skip over ar_rnat field */ \
;; /* avoid RAW on r16 & r17 */ \
(pUStk) st8 [r16]=r23,16; /* save ar.bspstore */ \
st8 [r17]=r31,16; /* save predicates */ \
(pKStk) adds r16=16,r16; /* skip over ar_bspstore field */ \
;; \
st8 [r16]=r29,16; /* save b0 */ \
st8 [r17]=r18,16; /* save ar.rsc value for "loadrs" */ \
cmp.eq pNonSys,pSys=r0,r0 /* initialize pSys=0, pNonSys=1 */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r20,16; /* save original r1 */ \
.mem.offset 8,0; st8.spill [r17]=r12,16; \
adds r12=-16,r1; /* switch to kernel memory stack (with 16 bytes of scratch) */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r13,16; \
.mem.offset 8,0; st8.spill [r17]=r21,16; /* save ar.fpsr */ \
mov r13=IA64_KR(CURRENT); /* establish `current' */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r15,16; \
.mem.offset 8,0; st8.spill [r17]=r14,16; \
;; \
.mem.offset 0,0; st8.spill [r16]=r2,16; \
.mem.offset 8,0; st8.spill [r17]=r3,16; \
ACCOUNT_GET_STAMP \
adds r2=IA64_PT_REGS_R16_OFFSET,r1; \
;; \
EXTRA; \
movl r1=__gp; /* establish kernel global pointer */ \
;; \
ACCOUNT_SYS_ENTER \
bsw.1; /* switch back to bank 1 (must be last in insn group) */ \
;;
/*
* SAVE_REST saves the remainder of pt_regs (with psr.ic on).
*
* Assumed state upon entry:
* psr.ic: on
* r2: points to &pt_regs.r16
* r3: points to &pt_regs.r17
* r8: contents of ar.ccv
* r9: contents of ar.csd
* r10: contents of ar.ssd
* r11: FPSR_DEFAULT
*
* Registers r14 and r15 are guaranteed not to be touched by SAVE_REST.
*/
#define SAVE_REST \
.mem.offset 0,0; st8.spill [r2]=r16,16; \
.mem.offset 8,0; st8.spill [r3]=r17,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r18,16; \
.mem.offset 8,0; st8.spill [r3]=r19,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r20,16; \
.mem.offset 8,0; st8.spill [r3]=r21,16; \
mov r18=b6; \
;; \
.mem.offset 0,0; st8.spill [r2]=r22,16; \
.mem.offset 8,0; st8.spill [r3]=r23,16; \
mov r19=b7; \
;; \
.mem.offset 0,0; st8.spill [r2]=r24,16; \
.mem.offset 8,0; st8.spill [r3]=r25,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r26,16; \
.mem.offset 8,0; st8.spill [r3]=r27,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r28,16; \
.mem.offset 8,0; st8.spill [r3]=r29,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r30,16; \
.mem.offset 8,0; st8.spill [r3]=r31,32; \
;; \
mov ar.fpsr=r11; /* M-unit */ \
st8 [r2]=r8,8; /* ar.ccv */ \
adds r24=PT(B6)-PT(F7),r3; \
;; \
stf.spill [r2]=f6,32; \
stf.spill [r3]=f7,32; \
;; \
stf.spill [r2]=f8,32; \
stf.spill [r3]=f9,32; \
;; \
stf.spill [r2]=f10; \
stf.spill [r3]=f11; \
adds r25=PT(B7)-PT(F11),r3; \
;; \
st8 [r24]=r18,16; /* b6 */ \
st8 [r25]=r19,16; /* b7 */ \
;; \
st8 [r24]=r9; /* ar.csd */ \
st8 [r25]=r10; /* ar.ssd */ \
;;
#define RSE_WORKAROUND \
(pUStk) extr.u r17=r18,3,6; \
(pUStk) sub r16=r18,r22; \
[1:](pKStk) br.cond.sptk.many 1f; \
.xdata4 ".data..patch.rse",1b-. \
;; \
cmp.ge p6,p7 = 33,r17; \
;; \
(p6) mov r17=0x310; \
(p7) mov r17=0x308; \
;; \
cmp.leu p1,p0=r16,r17; \
(p1) br.cond.sptk.many 1f; \
dep.z r17=r26,0,62; \
movl r16=2f; \
;; \
mov ar.pfs=r17; \
dep r27=r0,r27,16,14; \
mov b0=r16; \
;; \
br.ret.sptk b0; \
;; \
2: \
mov ar.rsc=r0 \
;; \
flushrs; \
;; \
mov ar.bspstore=r22 \
;; \
mov r18=ar.bsp; \
;; \
1: \
.pred.rel "mutex", pKStk, pUStk
#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(COVER, mov r30=cr.ifs, , RSE_WORKAROUND)
#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(COVER, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, , )