linux_dsm_epyc7002/drivers/pci/controller/pcie-iproc-platform.c
Rob Herring 331f634571 PCI: of: Add inbound resource parsing to helpers
Extend devm_of_pci_get_host_bridge_resources() and
pci_parse_request_of_pci_ranges() helpers to also parse the inbound
addresses from DT 'dma-ranges' and populate a resource list with the
translated addresses. This will help ensure 'dma-ranges' is always
parsed in a consistent way.

Tested-by: Srinath Mannam <srinath.mannam@broadcom.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> # for AArdvark
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Will Deacon <will@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Toan Le <toan@os.amperecomputing.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Tom Joseph <tjoseph@cadence.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: rfi@lists.rocketboards.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
2019-11-20 16:59:58 +00:00

152 lines
3.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015 Broadcom Corporation
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include "../pci.h"
#include "pcie-iproc.h"
static const struct of_device_id iproc_pcie_of_match_table[] = {
{
.compatible = "brcm,iproc-pcie",
.data = (int *)IPROC_PCIE_PAXB,
}, {
.compatible = "brcm,iproc-pcie-paxb-v2",
.data = (int *)IPROC_PCIE_PAXB_V2,
}, {
.compatible = "brcm,iproc-pcie-paxc",
.data = (int *)IPROC_PCIE_PAXC,
}, {
.compatible = "brcm,iproc-pcie-paxc-v2",
.data = (int *)IPROC_PCIE_PAXC_V2,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct iproc_pcie *pcie;
struct device_node *np = dev->of_node;
struct resource reg;
struct pci_host_bridge *bridge;
int ret;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
if (!bridge)
return -ENOMEM;
pcie = pci_host_bridge_priv(bridge);
pcie->dev = dev;
pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev);
ret = of_address_to_resource(np, 0, &reg);
if (ret < 0) {
dev_err(dev, "unable to obtain controller resources\n");
return ret;
}
pcie->base = devm_pci_remap_cfgspace(dev, reg.start,
resource_size(&reg));
if (!pcie->base) {
dev_err(dev, "unable to map controller registers\n");
return -ENOMEM;
}
pcie->base_addr = reg.start;
if (of_property_read_bool(np, "brcm,pcie-ob")) {
u32 val;
ret = of_property_read_u32(np, "brcm,pcie-ob-axi-offset",
&val);
if (ret) {
dev_err(dev,
"missing brcm,pcie-ob-axi-offset property\n");
return ret;
}
pcie->ob.axi_offset = val;
pcie->need_ob_cfg = true;
}
/*
* DT nodes are not used by all platforms that use the iProc PCIe
* core driver. For platforms that require explicit inbound mapping
* configuration, "dma-ranges" would have been present in DT
*/
pcie->need_ib_cfg = of_property_read_bool(np, "dma-ranges");
/* PHY use is optional */
pcie->phy = devm_phy_optional_get(dev, "pcie-phy");
if (IS_ERR(pcie->phy))
return PTR_ERR(pcie->phy);
ret = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
&bridge->dma_ranges, NULL);
if (ret) {
dev_err(dev, "unable to get PCI host bridge resources\n");
return ret;
}
/* PAXC doesn't support legacy IRQs, skip mapping */
switch (pcie->type) {
case IPROC_PCIE_PAXC:
case IPROC_PCIE_PAXC_V2:
break;
default:
pcie->map_irq = of_irq_parse_and_map_pci;
}
ret = iproc_pcie_setup(pcie, &bridge->windows);
if (ret) {
dev_err(dev, "PCIe controller setup failed\n");
return ret;
}
platform_set_drvdata(pdev, pcie);
return 0;
}
static int iproc_pcie_pltfm_remove(struct platform_device *pdev)
{
struct iproc_pcie *pcie = platform_get_drvdata(pdev);
return iproc_pcie_remove(pcie);
}
static void iproc_pcie_pltfm_shutdown(struct platform_device *pdev)
{
struct iproc_pcie *pcie = platform_get_drvdata(pdev);
iproc_pcie_shutdown(pcie);
}
static struct platform_driver iproc_pcie_pltfm_driver = {
.driver = {
.name = "iproc-pcie",
.of_match_table = of_match_ptr(iproc_pcie_of_match_table),
},
.probe = iproc_pcie_pltfm_probe,
.remove = iproc_pcie_pltfm_remove,
.shutdown = iproc_pcie_pltfm_shutdown,
};
module_platform_driver(iproc_pcie_pltfm_driver);
MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
MODULE_DESCRIPTION("Broadcom iPROC PCIe platform driver");
MODULE_LICENSE("GPL v2");