mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
ef24ba7091
NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff1491
("[POWERPC] Add new interrupt mapping core and change
platforms to use it")). It's also 0 on most other arches.
Although it's fairly harmless, every now and then it causes confusion
when a driver is built on powerpc and another arch which doesn't define
NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
some of which are to work around that problem.
So we'd like to remove it. This is fairly trivial in the arch code, we
just convert:
if (irq == NO_IRQ) to if (!irq)
if (irq != NO_IRQ) to if (irq)
irq = NO_IRQ; to irq = 0;
return NO_IRQ; to return 0;
And a few other odd cases as well.
At least for now we keep the #define NO_IRQ, because there is driver
code that uses NO_IRQ and the fixes to remove those will go via other
trees.
Note we also change some occurrences in PPC sound drivers, drivers/ps3,
and drivers/macintosh.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
206 lines
5.2 KiB
C
206 lines
5.2 KiB
C
/*
|
|
* Copyright 2006, Segher Boessenkool, IBM Corporation.
|
|
* Copyright 2006-2007, Michael Ellerman, IBM Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; version 2 of the
|
|
* License.
|
|
*
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/msi.h>
|
|
#include <asm/mpic.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/hw_irq.h>
|
|
#include <asm/ppc-pci.h>
|
|
#include <asm/msi_bitmap.h>
|
|
|
|
#include "mpic.h"
|
|
|
|
/* A bit ugly, can we get this from the pci_dev somehow? */
|
|
static struct mpic *msi_mpic;
|
|
|
|
static void mpic_u3msi_mask_irq(struct irq_data *data)
|
|
{
|
|
pci_msi_mask_irq(data);
|
|
mpic_mask_irq(data);
|
|
}
|
|
|
|
static void mpic_u3msi_unmask_irq(struct irq_data *data)
|
|
{
|
|
mpic_unmask_irq(data);
|
|
pci_msi_unmask_irq(data);
|
|
}
|
|
|
|
static struct irq_chip mpic_u3msi_chip = {
|
|
.irq_shutdown = mpic_u3msi_mask_irq,
|
|
.irq_mask = mpic_u3msi_mask_irq,
|
|
.irq_unmask = mpic_u3msi_unmask_irq,
|
|
.irq_eoi = mpic_end_irq,
|
|
.irq_set_type = mpic_set_irq_type,
|
|
.irq_set_affinity = mpic_set_affinity,
|
|
.name = "MPIC-U3MSI",
|
|
};
|
|
|
|
static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos)
|
|
{
|
|
u8 flags;
|
|
u32 tmp;
|
|
u64 addr;
|
|
|
|
pci_read_config_byte(pdev, pos + HT_MSI_FLAGS, &flags);
|
|
|
|
if (flags & HT_MSI_FLAGS_FIXED)
|
|
return HT_MSI_FIXED_ADDR;
|
|
|
|
pci_read_config_dword(pdev, pos + HT_MSI_ADDR_LO, &tmp);
|
|
addr = tmp & HT_MSI_ADDR_LO_MASK;
|
|
pci_read_config_dword(pdev, pos + HT_MSI_ADDR_HI, &tmp);
|
|
addr = addr | ((u64)tmp << 32);
|
|
|
|
return addr;
|
|
}
|
|
|
|
static u64 find_ht_magic_addr(struct pci_dev *pdev, unsigned int hwirq)
|
|
{
|
|
struct pci_bus *bus;
|
|
unsigned int pos;
|
|
|
|
for (bus = pdev->bus; bus && bus->self; bus = bus->parent) {
|
|
pos = pci_find_ht_capability(bus->self, HT_CAPTYPE_MSI_MAPPING);
|
|
if (pos)
|
|
return read_ht_magic_addr(bus->self, pos);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
|
|
/* U4 PCIe MSIs need to write to the special register in
|
|
* the bridge that generates interrupts. There should be
|
|
* theorically a register at 0xf8005000 where you just write
|
|
* the MSI number and that triggers the right interrupt, but
|
|
* unfortunately, this is busted in HW, the bridge endian swaps
|
|
* the value and hits the wrong nibble in the register.
|
|
*
|
|
* So instead we use another register set which is used normally
|
|
* for converting HT interrupts to MPIC interrupts, which decodes
|
|
* the interrupt number as part of the low address bits
|
|
*
|
|
* This will not work if we ever use more than one legacy MSI in
|
|
* a block but we never do. For one MSI or multiple MSI-X where
|
|
* each interrupt address can be specified separately, it works
|
|
* just fine.
|
|
*/
|
|
if (of_device_is_compatible(hose->dn, "u4-pcie") ||
|
|
of_device_is_compatible(hose->dn, "U4-pcie"))
|
|
return 0xf8004000 | (hwirq << 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void u3msi_teardown_msi_irqs(struct pci_dev *pdev)
|
|
{
|
|
struct msi_desc *entry;
|
|
irq_hw_number_t hwirq;
|
|
|
|
for_each_pci_msi_entry(entry, pdev) {
|
|
if (!entry->irq)
|
|
continue;
|
|
|
|
hwirq = virq_to_hw(entry->irq);
|
|
irq_set_msi_desc(entry->irq, NULL);
|
|
irq_dispose_mapping(entry->irq);
|
|
msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, 1);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
|
|
{
|
|
unsigned int virq;
|
|
struct msi_desc *entry;
|
|
struct msi_msg msg;
|
|
u64 addr;
|
|
int hwirq;
|
|
|
|
if (type == PCI_CAP_ID_MSIX)
|
|
pr_debug("u3msi: MSI-X untested, trying anyway.\n");
|
|
|
|
/* If we can't find a magic address then MSI ain't gonna work */
|
|
if (find_ht_magic_addr(pdev, 0) == 0 &&
|
|
find_u4_magic_addr(pdev, 0) == 0) {
|
|
pr_debug("u3msi: no magic address found for %s\n",
|
|
pci_name(pdev));
|
|
return -ENXIO;
|
|
}
|
|
|
|
for_each_pci_msi_entry(entry, pdev) {
|
|
hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1);
|
|
if (hwirq < 0) {
|
|
pr_debug("u3msi: failed allocating hwirq\n");
|
|
return hwirq;
|
|
}
|
|
|
|
addr = find_ht_magic_addr(pdev, hwirq);
|
|
if (addr == 0)
|
|
addr = find_u4_magic_addr(pdev, hwirq);
|
|
msg.address_lo = addr & 0xFFFFFFFF;
|
|
msg.address_hi = addr >> 32;
|
|
|
|
virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
|
|
if (!virq) {
|
|
pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq);
|
|
msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, 1);
|
|
return -ENOSPC;
|
|
}
|
|
|
|
irq_set_msi_desc(virq, entry);
|
|
irq_set_chip(virq, &mpic_u3msi_chip);
|
|
irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
|
|
|
|
pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n",
|
|
virq, hwirq, (unsigned long)addr);
|
|
|
|
printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n",
|
|
virq, hwirq, (unsigned long)addr);
|
|
msg.data = hwirq;
|
|
pci_write_msi_msg(virq, &msg);
|
|
|
|
hwirq++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mpic_u3msi_init(struct mpic *mpic)
|
|
{
|
|
int rc;
|
|
struct pci_controller *phb;
|
|
|
|
rc = mpic_msi_init_allocator(mpic);
|
|
if (rc) {
|
|
pr_debug("u3msi: Error allocating bitmap!\n");
|
|
return rc;
|
|
}
|
|
|
|
pr_debug("u3msi: Registering MPIC U3 MSI callbacks.\n");
|
|
|
|
BUG_ON(msi_mpic);
|
|
msi_mpic = mpic;
|
|
|
|
list_for_each_entry(phb, &hose_list, list_node) {
|
|
WARN_ON(phb->controller_ops.setup_msi_irqs);
|
|
phb->controller_ops.setup_msi_irqs = u3msi_setup_msi_irqs;
|
|
phb->controller_ops.teardown_msi_irqs = u3msi_teardown_msi_irqs;
|
|
}
|
|
|
|
return 0;
|
|
}
|