mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 11:26:40 +07:00
9de6d99a75
-m486, -O6 are partircularly amusing. Remove some other useless lines near as well. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
747 lines
20 KiB
C
747 lines
20 KiB
C
/* seeq8005.c: A network driver for linux. */
|
|
/*
|
|
Based on skeleton.c,
|
|
Written 1993-94 by Donald Becker.
|
|
See the skeleton.c file for further copyright information.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
The author may be reached as hamish@zot.apana.org.au
|
|
|
|
This file is a network device driver for the SEEQ 8005 chipset and
|
|
the Linux operating system.
|
|
|
|
*/
|
|
|
|
static const char version[] =
|
|
"seeq8005.c:v1.00 8/07/95 Hamish Coleman (hamish@zot.apana.org.au)\n";
|
|
|
|
/*
|
|
Sources:
|
|
SEEQ 8005 databook
|
|
|
|
Version history:
|
|
1.00 Public release. cosmetic changes (no warnings now)
|
|
0.68 Turning per- packet,interrupt debug messages off - testing for release.
|
|
0.67 timing problems/bad buffer reads seem to be fixed now
|
|
0.63 *!@$ protocol=eth_type_trans -- now packets flow
|
|
0.56 Send working
|
|
0.48 Receive working
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
|
|
#include "seeq8005.h"
|
|
|
|
/* First, a few definitions that the brave might change. */
|
|
/* A zero-terminated list of I/O addresses to be probed. */
|
|
static unsigned int seeq8005_portlist[] __initdata =
|
|
{ 0x300, 0x320, 0x340, 0x360, 0};
|
|
|
|
/* use 0 for production, 1 for verification, >2 for debug */
|
|
#ifndef NET_DEBUG
|
|
#define NET_DEBUG 1
|
|
#endif
|
|
static unsigned int net_debug = NET_DEBUG;
|
|
|
|
/* Information that need to be kept for each board. */
|
|
struct net_local {
|
|
unsigned short receive_ptr; /* What address in packet memory do we expect a recv_pkt_header? */
|
|
long open_time; /* Useless example local info. */
|
|
};
|
|
|
|
/* The station (ethernet) address prefix, used for IDing the board. */
|
|
#define SA_ADDR0 0x00
|
|
#define SA_ADDR1 0x80
|
|
#define SA_ADDR2 0x4b
|
|
|
|
/* Index to functions, as function prototypes. */
|
|
|
|
static int seeq8005_probe1(struct net_device *dev, int ioaddr);
|
|
static int seeq8005_open(struct net_device *dev);
|
|
static void seeq8005_timeout(struct net_device *dev);
|
|
static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t seeq8005_interrupt(int irq, void *dev_id);
|
|
static void seeq8005_rx(struct net_device *dev);
|
|
static int seeq8005_close(struct net_device *dev);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
|
|
/* Example routines you must write ;->. */
|
|
#define tx_done(dev) (inw(SEEQ_STATUS) & SEEQSTAT_TX_ON)
|
|
static void hardware_send_packet(struct net_device *dev, char *buf, int length);
|
|
extern void seeq8005_init(struct net_device *dev, int startp);
|
|
static inline void wait_for_buffer(struct net_device *dev);
|
|
|
|
|
|
/* Check for a network adaptor of this type, and return '0' iff one exists.
|
|
If dev->base_addr == 0, probe all likely locations.
|
|
If dev->base_addr == 1, always return failure.
|
|
*/
|
|
|
|
static int io = 0x320;
|
|
static int irq = 10;
|
|
|
|
struct net_device * __init seeq8005_probe(int unit)
|
|
{
|
|
struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
|
|
unsigned *port;
|
|
int err = 0;
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
if (unit >= 0) {
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
io = dev->base_addr;
|
|
irq = dev->irq;
|
|
}
|
|
|
|
if (io > 0x1ff) { /* Check a single specified location. */
|
|
err = seeq8005_probe1(dev, io);
|
|
} else if (io != 0) { /* Don't probe at all. */
|
|
err = -ENXIO;
|
|
} else {
|
|
for (port = seeq8005_portlist; *port; port++) {
|
|
if (seeq8005_probe1(dev, *port) == 0)
|
|
break;
|
|
}
|
|
if (!*port)
|
|
err = -ENODEV;
|
|
}
|
|
if (err)
|
|
goto out;
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out1;
|
|
return dev;
|
|
out1:
|
|
release_region(dev->base_addr, SEEQ8005_IO_EXTENT);
|
|
out:
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
/* This is the real probe routine. Linux has a history of friendly device
|
|
probes on the ISA bus. A good device probes avoids doing writes, and
|
|
verifies that the correct device exists and functions. */
|
|
|
|
static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
|
|
{
|
|
static unsigned version_printed;
|
|
int i,j;
|
|
unsigned char SA_prom[32];
|
|
int old_cfg1;
|
|
int old_cfg2;
|
|
int old_stat;
|
|
int old_dmaar;
|
|
int old_rear;
|
|
int retval;
|
|
|
|
if (!request_region(ioaddr, SEEQ8005_IO_EXTENT, "seeq8005"))
|
|
return -ENODEV;
|
|
|
|
if (net_debug>1)
|
|
printk("seeq8005: probing at 0x%x\n",ioaddr);
|
|
|
|
old_stat = inw(SEEQ_STATUS); /* read status register */
|
|
if (old_stat == 0xffff) {
|
|
retval = -ENODEV;
|
|
goto out; /* assume that 0xffff == no device */
|
|
}
|
|
if ( (old_stat & 0x1800) != 0x1800 ) { /* assume that unused bits are 1, as my manual says */
|
|
if (net_debug>1) {
|
|
printk("seeq8005: reserved stat bits != 0x1800\n");
|
|
printk(" == 0x%04x\n",old_stat);
|
|
}
|
|
retval = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
old_rear = inw(SEEQ_REA);
|
|
if (old_rear == 0xffff) {
|
|
outw(0,SEEQ_REA);
|
|
if (inw(SEEQ_REA) == 0xffff) { /* assume that 0xffff == no device */
|
|
retval = -ENODEV;
|
|
goto out;
|
|
}
|
|
} else if ((old_rear & 0xff00) != 0xff00) { /* assume that unused bits are 1 */
|
|
if (net_debug>1) {
|
|
printk("seeq8005: unused rear bits != 0xff00\n");
|
|
printk(" == 0x%04x\n",old_rear);
|
|
}
|
|
retval = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
old_cfg2 = inw(SEEQ_CFG2); /* read CFG2 register */
|
|
old_cfg1 = inw(SEEQ_CFG1);
|
|
old_dmaar = inw(SEEQ_DMAAR);
|
|
|
|
if (net_debug>4) {
|
|
printk("seeq8005: stat = 0x%04x\n",old_stat);
|
|
printk("seeq8005: cfg1 = 0x%04x\n",old_cfg1);
|
|
printk("seeq8005: cfg2 = 0x%04x\n",old_cfg2);
|
|
printk("seeq8005: raer = 0x%04x\n",old_rear);
|
|
printk("seeq8005: dmaar= 0x%04x\n",old_dmaar);
|
|
}
|
|
|
|
outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); /* setup for reading PROM */
|
|
outw( 0, SEEQ_DMAAR); /* set starting PROM address */
|
|
outw( SEEQCFG1_BUFFER_PROM, SEEQ_CFG1); /* set buffer to look at PROM */
|
|
|
|
|
|
j=0;
|
|
for(i=0; i <32; i++) {
|
|
j+= SA_prom[i] = inw(SEEQ_BUFFER) & 0xff;
|
|
}
|
|
|
|
#if 0
|
|
/* untested because I only have the one card */
|
|
if ( (j&0xff) != 0 ) { /* checksum appears to be 8bit = 0 */
|
|
if (net_debug>1) { /* check this before deciding that we have a card */
|
|
printk("seeq8005: prom sum error\n");
|
|
}
|
|
outw( old_stat, SEEQ_STATUS);
|
|
outw( old_dmaar, SEEQ_DMAAR);
|
|
outw( old_cfg1, SEEQ_CFG1);
|
|
retval = -ENODEV;
|
|
goto out;
|
|
}
|
|
#endif
|
|
|
|
outw( SEEQCFG2_RESET, SEEQ_CFG2); /* reset the card */
|
|
udelay(5);
|
|
outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
|
|
|
|
if (net_debug) {
|
|
printk("seeq8005: prom sum = 0x%08x\n",j);
|
|
for(j=0; j<32; j+=16) {
|
|
printk("seeq8005: prom %02x: ",j);
|
|
for(i=0;i<16;i++) {
|
|
printk("%02x ",SA_prom[j|i]);
|
|
}
|
|
printk(" ");
|
|
for(i=0;i<16;i++) {
|
|
if ((SA_prom[j|i]>31)&&(SA_prom[j|i]<127)) {
|
|
printk("%c", SA_prom[j|i]);
|
|
} else {
|
|
printk(" ");
|
|
}
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* testing the packet buffer memory doesn't work yet
|
|
* but all other buffer accesses do
|
|
* - fixing is not a priority
|
|
*/
|
|
if (net_debug>1) { /* test packet buffer memory */
|
|
printk("seeq8005: testing packet buffer ... ");
|
|
outw( SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1);
|
|
outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
|
|
outw( 0 , SEEQ_DMAAR);
|
|
for(i=0;i<32768;i++) {
|
|
outw(0x5a5a, SEEQ_BUFFER);
|
|
}
|
|
j=jiffies+HZ;
|
|
while ( ((inw(SEEQ_STATUS) & SEEQSTAT_FIFO_EMPTY) != SEEQSTAT_FIFO_EMPTY) && time_before(jiffies, j) )
|
|
mb();
|
|
outw( 0 , SEEQ_DMAAR);
|
|
while ( ((inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, j+HZ))
|
|
mb();
|
|
if ( (inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT)
|
|
outw( SEEQCMD_WINDOW_INT_ACK | (inw(SEEQ_STATUS)& SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
|
|
j=0;
|
|
for(i=0;i<32768;i++) {
|
|
if (inw(SEEQ_BUFFER) != 0x5a5a)
|
|
j++;
|
|
}
|
|
if (j) {
|
|
printk("%i\n",j);
|
|
} else {
|
|
printk("ok.\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (net_debug && version_printed++ == 0)
|
|
printk(version);
|
|
|
|
printk("%s: %s found at %#3x, ", dev->name, "seeq8005", ioaddr);
|
|
|
|
/* Fill in the 'dev' fields. */
|
|
dev->base_addr = ioaddr;
|
|
dev->irq = irq;
|
|
|
|
/* Retrieve and print the ethernet address. */
|
|
for (i = 0; i < 6; i++)
|
|
dev->dev_addr[i] = SA_prom[i+6];
|
|
printk("%pM", dev->dev_addr);
|
|
|
|
if (dev->irq == 0xff)
|
|
; /* Do nothing: a user-level program will set it. */
|
|
else if (dev->irq < 2) { /* "Auto-IRQ" */
|
|
unsigned long cookie = probe_irq_on();
|
|
|
|
outw( SEEQCMD_RX_INT_EN | SEEQCMD_SET_RX_ON | SEEQCMD_SET_RX_OFF, SEEQ_CMD );
|
|
|
|
dev->irq = probe_irq_off(cookie);
|
|
|
|
if (net_debug >= 2)
|
|
printk(" autoirq is %d\n", dev->irq);
|
|
} else if (dev->irq == 2)
|
|
/* Fixup for users that don't know that IRQ 2 is really IRQ 9,
|
|
* or don't know which one to set.
|
|
*/
|
|
dev->irq = 9;
|
|
|
|
#if 0
|
|
{
|
|
int irqval = request_irq(dev->irq, &seeq8005_interrupt, 0, "seeq8005", dev);
|
|
if (irqval) {
|
|
printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name,
|
|
dev->irq, irqval);
|
|
retval = -EAGAIN;
|
|
goto out;
|
|
}
|
|
}
|
|
#endif
|
|
dev->open = seeq8005_open;
|
|
dev->stop = seeq8005_close;
|
|
dev->hard_start_xmit = seeq8005_send_packet;
|
|
dev->tx_timeout = seeq8005_timeout;
|
|
dev->watchdog_timeo = HZ/20;
|
|
dev->set_multicast_list = set_multicast_list;
|
|
dev->flags &= ~IFF_MULTICAST;
|
|
|
|
return 0;
|
|
out:
|
|
release_region(ioaddr, SEEQ8005_IO_EXTENT);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* Open/initialize the board. This is called (in the current kernel)
|
|
sometime after booting when the 'ifconfig' program is run.
|
|
|
|
This routine should set everything up anew at each open, even
|
|
registers that "should" only need to be set once at boot, so that
|
|
there is non-reboot way to recover if something goes wrong.
|
|
*/
|
|
static int seeq8005_open(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
|
|
{
|
|
int irqval = request_irq(dev->irq, &seeq8005_interrupt, 0, "seeq8005", dev);
|
|
if (irqval) {
|
|
printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name,
|
|
dev->irq, irqval);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
/* Reset the hardware here. Don't forget to set the station address. */
|
|
seeq8005_init(dev, 1);
|
|
|
|
lp->open_time = jiffies;
|
|
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void seeq8005_timeout(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr;
|
|
printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
|
|
tx_done(dev) ? "IRQ conflict" : "network cable problem");
|
|
/* Try to restart the adaptor. */
|
|
seeq8005_init(dev, 1);
|
|
dev->trans_start = jiffies;
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
short length = skb->len;
|
|
unsigned char *buf;
|
|
|
|
if (length < ETH_ZLEN) {
|
|
if (skb_padto(skb, ETH_ZLEN))
|
|
return 0;
|
|
length = ETH_ZLEN;
|
|
}
|
|
buf = skb->data;
|
|
|
|
/* Block a timer-based transmit from overlapping */
|
|
netif_stop_queue(dev);
|
|
|
|
hardware_send_packet(dev, buf, length);
|
|
dev->trans_start = jiffies;
|
|
dev->stats.tx_bytes += length;
|
|
dev_kfree_skb (skb);
|
|
/* You might need to clean up and record Tx statistics here. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* wait_for_buffer
|
|
*
|
|
* This routine waits for the SEEQ chip to assert that the FIFO is ready
|
|
* by checking for a window interrupt, and then clearing it. This has to
|
|
* occur in the interrupt handler!
|
|
*/
|
|
inline void wait_for_buffer(struct net_device * dev)
|
|
{
|
|
int ioaddr = dev->base_addr;
|
|
unsigned long tmp;
|
|
int status;
|
|
|
|
tmp = jiffies + HZ;
|
|
while ( ( ((status=inw(SEEQ_STATUS)) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, tmp))
|
|
cpu_relax();
|
|
|
|
if ( (status & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT)
|
|
outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
}
|
|
|
|
/* The typical workload of the driver:
|
|
Handle the network interface interrupts. */
|
|
static irqreturn_t seeq8005_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct net_local *lp;
|
|
int ioaddr, status, boguscount = 0;
|
|
int handled = 0;
|
|
|
|
ioaddr = dev->base_addr;
|
|
lp = netdev_priv(dev);
|
|
|
|
status = inw(SEEQ_STATUS);
|
|
do {
|
|
if (net_debug >2) {
|
|
printk("%s: int, status=0x%04x\n",dev->name,status);
|
|
}
|
|
|
|
if (status & SEEQSTAT_WINDOW_INT) {
|
|
handled = 1;
|
|
outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
if (net_debug) {
|
|
printk("%s: window int!\n",dev->name);
|
|
}
|
|
}
|
|
if (status & SEEQSTAT_TX_INT) {
|
|
handled = 1;
|
|
outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
dev->stats.tx_packets++;
|
|
netif_wake_queue(dev); /* Inform upper layers. */
|
|
}
|
|
if (status & SEEQSTAT_RX_INT) {
|
|
handled = 1;
|
|
/* Got a packet(s). */
|
|
seeq8005_rx(dev);
|
|
}
|
|
status = inw(SEEQ_STATUS);
|
|
} while ( (++boguscount < 10) && (status & SEEQSTAT_ANY_INT)) ;
|
|
|
|
if(net_debug>2) {
|
|
printk("%s: eoi\n",dev->name);
|
|
}
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* We have a good packet(s), get it/them out of the buffers. */
|
|
static void seeq8005_rx(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int boguscount = 10;
|
|
int pkt_hdr;
|
|
int ioaddr = dev->base_addr;
|
|
|
|
do {
|
|
int next_packet;
|
|
int pkt_len;
|
|
int i;
|
|
int status;
|
|
|
|
status = inw(SEEQ_STATUS);
|
|
outw( lp->receive_ptr, SEEQ_DMAAR);
|
|
outw(SEEQCMD_FIFO_READ | SEEQCMD_RX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
wait_for_buffer(dev);
|
|
next_packet = ntohs(inw(SEEQ_BUFFER));
|
|
pkt_hdr = inw(SEEQ_BUFFER);
|
|
|
|
if (net_debug>2) {
|
|
printk("%s: 0x%04x recv next=0x%04x, hdr=0x%04x\n",dev->name,lp->receive_ptr,next_packet,pkt_hdr);
|
|
}
|
|
|
|
if ((next_packet == 0) || ((pkt_hdr & SEEQPKTH_CHAIN)==0)) { /* Read all the frames? */
|
|
return; /* Done for now */
|
|
}
|
|
|
|
if ((pkt_hdr & SEEQPKTS_DONE)==0)
|
|
break;
|
|
|
|
if (next_packet < lp->receive_ptr) {
|
|
pkt_len = (next_packet + 0x10000 - ((DEFAULT_TEA+1)<<8)) - lp->receive_ptr - 4;
|
|
} else {
|
|
pkt_len = next_packet - lp->receive_ptr - 4;
|
|
}
|
|
|
|
if (next_packet < ((DEFAULT_TEA+1)<<8)) { /* is the next_packet address sane? */
|
|
printk("%s: recv packet ring corrupt, resetting board\n",dev->name);
|
|
seeq8005_init(dev,1);
|
|
return;
|
|
}
|
|
|
|
lp->receive_ptr = next_packet;
|
|
|
|
if (net_debug>2) {
|
|
printk("%s: recv len=0x%04x\n",dev->name,pkt_len);
|
|
}
|
|
|
|
if (pkt_hdr & SEEQPKTS_ANY_ERROR) { /* There was an error. */
|
|
dev->stats.rx_errors++;
|
|
if (pkt_hdr & SEEQPKTS_SHORT) dev->stats.rx_frame_errors++;
|
|
if (pkt_hdr & SEEQPKTS_DRIB) dev->stats.rx_frame_errors++;
|
|
if (pkt_hdr & SEEQPKTS_OVERSIZE) dev->stats.rx_over_errors++;
|
|
if (pkt_hdr & SEEQPKTS_CRC_ERR) dev->stats.rx_crc_errors++;
|
|
/* skip over this packet */
|
|
outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA);
|
|
} else {
|
|
/* Malloc up new buffer. */
|
|
struct sk_buff *skb;
|
|
unsigned char *buf;
|
|
|
|
skb = dev_alloc_skb(pkt_len);
|
|
if (skb == NULL) {
|
|
printk("%s: Memory squeeze, dropping packet.\n", dev->name);
|
|
dev->stats.rx_dropped++;
|
|
break;
|
|
}
|
|
skb_reserve(skb, 2); /* align data on 16 byte */
|
|
buf = skb_put(skb,pkt_len);
|
|
|
|
insw(SEEQ_BUFFER, buf, (pkt_len + 1) >> 1);
|
|
|
|
if (net_debug>2) {
|
|
char * p = buf;
|
|
printk("%s: recv ",dev->name);
|
|
for(i=0;i<14;i++) {
|
|
printk("%02x ",*(p++)&0xff);
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
skb->protocol=eth_type_trans(skb,dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += pkt_len;
|
|
}
|
|
} while ((--boguscount) && (pkt_hdr & SEEQPKTH_CHAIN));
|
|
|
|
/* If any worth-while packets have been received, netif_rx()
|
|
has done a mark_bh(NET_BH) for us and will work on them
|
|
when we get to the bottom-half routine. */
|
|
return;
|
|
}
|
|
|
|
/* The inverse routine to net_open(). */
|
|
static int seeq8005_close(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
|
|
lp->open_time = 0;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Flush the Tx and disable Rx here. */
|
|
outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
/* Update the statistics here. */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
num_addrs == -1 Promiscuous mode, receive all packets
|
|
num_addrs == 0 Normal mode, clear multicast list
|
|
num_addrs > 0 Multicast mode, receive normal and MC packets, and do
|
|
best-effort filtering.
|
|
*/
|
|
static void set_multicast_list(struct net_device *dev)
|
|
{
|
|
/*
|
|
* I _could_ do up to 6 addresses here, but won't (yet?)
|
|
*/
|
|
|
|
#if 0
|
|
int ioaddr = dev->base_addr;
|
|
/*
|
|
* hmm, not even sure if my matching works _anyway_ - seem to be receiving
|
|
* _everything_ . . .
|
|
*/
|
|
|
|
if (num_addrs) { /* Enable promiscuous mode */
|
|
outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_ALL, SEEQ_CFG1);
|
|
dev->flags|=IFF_PROMISC;
|
|
} else { /* Disable promiscuous mode, use normal mode */
|
|
outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_BROAD, SEEQ_CFG1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void seeq8005_init(struct net_device *dev, int startp)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
int i;
|
|
|
|
outw(SEEQCFG2_RESET, SEEQ_CFG2); /* reset device */
|
|
udelay(5);
|
|
|
|
outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
|
|
outw( 0, SEEQ_DMAAR); /* load start address into both low and high byte */
|
|
/* wait_for_buffer(dev); */ /* I think that you only need a wait for memory buffer */
|
|
outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1);
|
|
|
|
for(i=0;i<6;i++) { /* set Station address */
|
|
outb(dev->dev_addr[i], SEEQ_BUFFER);
|
|
udelay(2);
|
|
}
|
|
|
|
outw( SEEQCFG1_BUFFER_TEA, SEEQ_CFG1); /* set xmit end area pointer to 16K */
|
|
outb( DEFAULT_TEA, SEEQ_BUFFER); /* this gives us 16K of send buffer and 48K of recv buffer */
|
|
|
|
lp->receive_ptr = (DEFAULT_TEA+1)<<8; /* so we can find our packet_header */
|
|
outw( lp->receive_ptr, SEEQ_RPR); /* Receive Pointer Register is set to recv buffer memory */
|
|
|
|
outw( 0x00ff, SEEQ_REA); /* Receive Area End */
|
|
|
|
if (net_debug>4) {
|
|
printk("%s: SA0 = ",dev->name);
|
|
|
|
outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
|
|
outw( 0, SEEQ_DMAAR);
|
|
outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1);
|
|
|
|
for(i=0;i<6;i++) {
|
|
printk("%02x ",inb(SEEQ_BUFFER));
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
outw( SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD | SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1);
|
|
outw( SEEQCFG2_AUTO_REA | SEEQCFG2_CTRLO, SEEQ_CFG2);
|
|
outw( SEEQCMD_SET_RX_ON | SEEQCMD_TX_INT_EN | SEEQCMD_RX_INT_EN, SEEQ_CMD);
|
|
|
|
if (net_debug>4) {
|
|
int old_cfg1;
|
|
old_cfg1 = inw(SEEQ_CFG1);
|
|
printk("%s: stat = 0x%04x\n",dev->name,inw(SEEQ_STATUS));
|
|
printk("%s: cfg1 = 0x%04x\n",dev->name,old_cfg1);
|
|
printk("%s: cfg2 = 0x%04x\n",dev->name,inw(SEEQ_CFG2));
|
|
printk("%s: raer = 0x%04x\n",dev->name,inw(SEEQ_REA));
|
|
printk("%s: dmaar= 0x%04x\n",dev->name,inw(SEEQ_DMAAR));
|
|
|
|
}
|
|
}
|
|
|
|
|
|
static void hardware_send_packet(struct net_device * dev, char *buf, int length)
|
|
{
|
|
int ioaddr = dev->base_addr;
|
|
int status = inw(SEEQ_STATUS);
|
|
int transmit_ptr = 0;
|
|
unsigned long tmp;
|
|
|
|
if (net_debug>4) {
|
|
printk("%s: send 0x%04x\n",dev->name,length);
|
|
}
|
|
|
|
/* Set FIFO to writemode and set packet-buffer address */
|
|
outw( SEEQCMD_FIFO_WRITE | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
outw( transmit_ptr, SEEQ_DMAAR);
|
|
|
|
/* output SEEQ Packet header barfage */
|
|
outw( htons(length + 4), SEEQ_BUFFER);
|
|
outw( SEEQPKTH_XMIT | SEEQPKTH_DATA_FOLLOWS | SEEQPKTH_XMIT_INT_EN, SEEQ_BUFFER );
|
|
|
|
/* blat the buffer */
|
|
outsw( SEEQ_BUFFER, buf, (length +1) >> 1);
|
|
/* paranoia !! */
|
|
outw( 0, SEEQ_BUFFER);
|
|
outw( 0, SEEQ_BUFFER);
|
|
|
|
/* set address of start of transmit chain */
|
|
outw( transmit_ptr, SEEQ_TPR);
|
|
|
|
/* drain FIFO */
|
|
tmp = jiffies;
|
|
while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && time_before(jiffies, tmp + HZ))
|
|
mb();
|
|
|
|
/* doit ! */
|
|
outw( SEEQCMD_WINDOW_INT_ACK | SEEQCMD_SET_TX_ON | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
|
|
|
|
}
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
static struct net_device *dev_seeq;
|
|
MODULE_LICENSE("GPL");
|
|
module_param(io, int, 0);
|
|
module_param(irq, int, 0);
|
|
MODULE_PARM_DESC(io, "SEEQ 8005 I/O base address");
|
|
MODULE_PARM_DESC(irq, "SEEQ 8005 IRQ number");
|
|
|
|
int __init init_module(void)
|
|
{
|
|
dev_seeq = seeq8005_probe(-1);
|
|
if (IS_ERR(dev_seeq))
|
|
return PTR_ERR(dev_seeq);
|
|
return 0;
|
|
}
|
|
|
|
void __exit cleanup_module(void)
|
|
{
|
|
unregister_netdev(dev_seeq);
|
|
release_region(dev_seeq->base_addr, SEEQ8005_IO_EXTENT);
|
|
free_netdev(dev_seeq);
|
|
}
|
|
|
|
#endif /* MODULE */
|