AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-04 11:46:46 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
6419945e33
linux_dsm_epyc7002/arch/arm/boot/dts/imx7d-sdb.dts
Linus Torvalds b240b419db ARM: SoC device tree updates for 4.17 
This is the usual set of changes for device trees, with over 700
 non-merged changesets. There is an ongoing set of dtc warning fixes and
 the usual bugfixes, cleanups and added device support.
 
 The most interesting bit as usual is support for new machines listed
 below:
 
 - The Allwinner H6 makes its debut with the Pine-H64 board, and we get
   two new machines based on its older siblings: the H5 based OrangePi
   Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side,
   we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2
   Zero development board (based on H2).
 
 - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
   development board and p2888 CPU module.
 
 - The Nuvoton npcm750 is a BMC that was newly added, for now we only
   support running on the evaluation board.
 
 - STmicroelectronics stm32 gains support for the stm32mp157c and two
   evaluation boards.
 
 - The Toradex Colibri board family grows a few members based on the
   i.MX6ULL variant.
 
 - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6
   family of chips.
 
 - The Phytec phyBOARD Mira is a family of industrial boards based on
   i.MX6. For now, four models get added.
 
 - TI am335x based PDU-001 is an industrial embedded machine used for
   traffic monitoring
 
 - The Aspeed platform now supports running on the BMC on the Qualcomm
   Centriq 2400 server
 
 - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm
   msm8974 based Galaxy S5 is a rather different phone made by the same
   company.
 
 - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
   for the various boards made by Xilinx themselves, as well as the
   Digilent Zybo Z7.
 
 - The ARM Versatile family now supports the "IB2" interface board.
 
 - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
   evaluation boards named after a kind of beer, as most of them are.
   The r8a77980 (V3H) based "Condor" apparently doesn't follow that
   tradition. ;-)
 
 - ROC-RK3328-CC is a simple developement board from the Libre Computer
   Project, based on the Rockchips RK3328 SoC
 
 - Haiku is another development board plus Qseven module based on Rockchips
   RK3368 and made by Theobroma Systems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxjFeAAoJEGCrR//JCVInw2gQALS/sK83IJE0Ngw98Cko8fqn
 NnbaLaZybajRCdZfXFrIgyL1YijsK4eeniA6zXvFixctlx0FcH2Ep1merbFa52Il
 bZKDOeCr6JfSggk2pZvnC7efwAsc5qMmSGU7KgvUV9vgAXTXANdTlVttoBrZldvI
 baR5W34BjcXRvA14FyxUPiQgGiCft3rE2ZJA9CqJQ9W44vxnTpbcYpimwya8LWss
 hhbJ8P73HhVsKlwS4QXajpLJSo52VdhGDZCd/MwH1yWjzgQZ7O2ijSFz3jYmvdZf
 1guE1FhcpHX8/0j1v5OqfEFAjaFUl+Fef11McUlGe4lVM2C47kuNEil//cb4pJ2j
 ipQ0qR26GkoBmoxSlt0cI9yUtSemTWzZZSLeTPNQGytb7hRNdR22xwf2vr9Eh6dB
 PMG2G0VXVp5Xuif+3iDLxFKiPsBsN49RGtqOj6p9eZhbTIRjgQ5671T3Kla0KRLH
 CFlWyYYrRqtUVeM3XSXmNQb9pyuCDqOlLyVngDbCuz4HIly3I2kgSYLTCFZx5FfT
 kkVbNy+cO/TOkX8w1P8XiRDGQ16YHQ5kjvy1mUPiPEnf70L2gD8HXWeVX1J2SXzF
 OoeNJTzON0cpvtUaM/4hsASi5mHz8rv8CTH8HUviRlXvSH/7JqlM2XqhWSVJ+gYZ
 S7/RgDEviOzsHBf/EMUN
 =7rHo
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is the usual set of changes for device trees, with over 700
  non-merged changesets. There is an ongoing set of dtc warning fixes
  and the usual bugfixes, cleanups and added device support.

  The most interesting bit as usual is support for new machines listed
  below:

   - The Allwinner H6 makes its debut with the Pine-H64 board, and we
     get two new machines based on its older siblings: the H5 based
     OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
     32-bit side, we add The Olimex som204 based on Allwinner A20, and
     the Banana Pi M2 Zero development board (based on H2).

   - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
     development board and p2888 CPU module.

   - The Nuvoton npcm750 is a BMC that was newly added, for now we only
     support running on the evaluation board.

   - STmicroelectronics stm32 gains support for the stm32mp157c and two
     evaluation boards.

   - The Toradex Colibri board family grows a few members based on the
     i.MX6ULL variant.

   - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
     of chips.

   - The Phytec phyBOARD Mira is a family of industrial boards based on
     i.MX6. For now, four models get added.

   - TI am335x based PDU-001 is an industrial embedded machine used for
     traffic monitoring

   - The Aspeed platform now supports running on the BMC on the Qualcomm
     Centriq 2400 server

   - Samsung Exynos4 based Galaxy S3 is a family of mobile phones
     Qualcomm msm8974 based Galaxy S5 is a rather different phone made
     by the same company.

   - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
     for the various boards made by Xilinx themselves, as well as the
     Digilent Zybo Z7.

   - The ARM Versatile family now supports the "IB2" interface board.

   - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
     evaluation boards named after a kind of beer, as most of them are.
     The r8a77980 (V3H) based "Condor" apparently doesn't follow that
     tradition. ;-)

   - ROC-RK3328-CC is a simple developement board from the Libre
     Computer Project, based on the Rockchips RK3328 SoC

   - Haiku is another development board plus Qseven module based on
     Rockchips RK3368 and made by Theobroma Systems"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
  arm: dts: modify Nuvoton NPCM7xx device tree structure
  arm: dts: modify Makefile NPCM750 configuration name
  arm: dts: modify clock binding in NPCM750 device tree
  arm: dts: modify timer register size in NPCM750 device tree
  arm: dts: modify UART compatible name in NPCM750 device tree
  arm: dts: add watchdog device to NPCM750 device tree
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
  arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
  arm: dts: armada-385-db-ap: use SPDX-License-Identifier
  arm: dts: armada-388-rd: use SPDX-License-Identifier
  arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
  arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
  arm: dts: armada-370-db: use SPDX-License-Identifier
  arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
  arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
  arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
  ...
2018-04-05 21:18:09 -07:00

742 lines
18 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx7d.dtsi"
/ {
model = "Freescale i.MX7 SabreSD Board";
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
memory@80000000 {
reg = <0x80000000 0x80000000>;
};
spi4 {
compatible = "spi-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi4>;
gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
extended_io: gpio-expander@0 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
};
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_can2_3v3: regulator-can2-3v3 {
compatible = "regulator-fixed";
regulator-name = "can2-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
reg_vref_1v8: regulator-vref-1v8 {
compatible = "regulator-fixed";
regulator-name = "vref-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_brcm: regulator-brcm {
compatible = "regulator-fixed";
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "brcm_reg";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_brcm_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <200000>;
};
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
};
reg_can2_3v3: regulator-can2-3v3 {
compatible = "regulator-fixed";
regulator-name = "can2-3v3";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
};
panel {
compatible = "innolux,at043tn24";
pinctrl-0 = <&pinctrl_backlight>;
enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_lcd_3v3>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
};
&adc1 {
vref-supply = <&reg_vref_1v8>;
status = "okay";
};
&adc2 {
vref-supply = <&reg_vref_1v8>;
status = "okay";
};
&cpu0 {
arm-supply = <&sw1a_reg>;
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
status = "okay";
tsc2046@0 {
compatible = "ti,tsc2046";
reg = <0>;
spi-max-frequency = <1000000>;
pinctrl-names ="default";
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0>;
ti,x-max = /bits/ 16 <0>;
ti,y-min = /bits/ 16 <0>;
ti,y-max = /bits/ 16 <0>;
ti,pressure-max = /bits/ 16 <0>;
ti,x-plate-ohms = /bits/ 16 <400>;
wakeup-source;
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
fsl,magic-packet;
phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
<&clks IMX7D_ENET2_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-handle = <&ethphy1>;
fsl,magic-packet;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_can2_3v3>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic: pfuze3000@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
regulators {
sw1a_reg: sw1a {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
/* use sw1c_reg to align with pfuze100/pfuze200 */
sw1c_reg: sw1b {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1650000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen2_reg: vldo2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vccsd {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: v33 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vldo4 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
mpl3115@60 {
compatible = "fsl,mpl3115";
reg = <0x60>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
clock-names = "mclk";
wlf,shared-lrclk;
};
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
status = "okay";
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
&pcie {
reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6>;
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
uart-has-rtscts;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usb_otg2_vbus>;
dr_mode = "host";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
wakeup-source;
keep-power-in-suspend;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
wakeup-source;
keep-power-in-suspend;
non-removable;
vmmc-supply = <&reg_brcm>;
fsl,tuning-step = <2>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx7d-sdb {
pinctrl_brcm_reg: brcmreggrp {
fsl,pins = <
MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14
>;
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2
MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2
MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
>;
};
pinctrl_flexcan2_reg: flexcan2reggrp {
fsl,pins = <
MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
>;
};
pinctrl_lcdif: lcdifgrp {
fsl,pins = <
MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
MX7D_PAD_LCD_CLK__LCD_CLK 0x79
MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
MX7D_PAD_LCD_RESET__LCD_RESET 0x79
>;
};
pinctrl_spi4: spi4grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
>;
};
pinctrl_tsc2046_pendown: tsc2046_pendown {
fsl,pins = <
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
MX7D_PAD_SD2_CLK__SD2_CLK 0x19
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
>;
};
};
};
&iomuxc_lpsr {
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
>;
};
pinctrl_backlight: backlightgrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0
>;
};
};
Reference in New Issue View Git Blame Copy Permalink