linux_dsm_epyc7002/arch/x86/hyperv/hv_init.c
Michael Kelley 4df4cb9e99 x86/hyperv: Initialize clockevents earlier in CPU onlining
Hyper-V has historically initialized stimer-based clockevents late in the
process of onlining a CPU because clockevents depend on stimer
interrupts. In the original Hyper-V design, stimer interrupts generate a
VMbus message, so the VMbus machinery must be running first, and VMbus
can't be initialized until relatively late. On x86/64, LAPIC timer based
clockevents are used during early initialization before VMbus and
stimer-based clockevents are ready, and again during CPU offlining after
the stimer clockevents have been shut down.

Unfortunately, this design creates problems when offlining CPUs for
hibernation or other purposes. stimer-based clockevents are shut down
relatively early in the offlining process, so clockevents_unbind_device()
must be used to fallback to the LAPIC-based clockevents for the remainder
of the offlining process.  Furthermore, the late initialization and early
shutdown of stimer-based clockevents doesn't work well on ARM64 since there
is no other timer like the LAPIC to fallback to. So CPU onlining and
offlining doesn't work properly.

Fix this by recognizing that stimer Direct Mode is the normal path for
newer versions of Hyper-V on x86/64, and the only path on other
architectures. With stimer Direct Mode, stimer interrupts don't require any
VMbus machinery. stimer clockevents can be initialized and shut down
consistent with how it is done for other clockevent devices. While the old
VMbus-based stimer interrupts must still be supported for backward
compatibility on x86, that mode of operation can be treated as legacy.

So add a new Hyper-V stimer entry in the CPU hotplug state list, and use
that new state when in Direct Mode. Update the Hyper-V clocksource driver
to allocate and initialize stimer clockevents earlier during boot. Update
Hyper-V initialization and the VMbus driver to use this new design. As a
result, the LAPIC timer is no longer used during boot or CPU
onlining/offlining and clockevents_unbind_device() is not called.  But
retain the old design as a legacy implementation for older versions of
Hyper-V that don't support Direct Mode.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
2019-11-15 10:33:49 +01:00

440 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* X86 specific Hyper-V initialization code.
*
* Copyright (C) 2016, Microsoft, Inc.
*
* Author : K. Y. Srinivasan <kys@microsoft.com>
*/
#include <linux/efi.h>
#include <linux/types.h>
#include <asm/apic.h>
#include <asm/desc.h>
#include <asm/hypervisor.h>
#include <asm/hyperv-tlfs.h>
#include <asm/mshyperv.h>
#include <linux/version.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/hyperv.h>
#include <linux/slab.h>
#include <linux/cpuhotplug.h>
#include <clocksource/hyperv_timer.h>
void *hv_hypercall_pg;
EXPORT_SYMBOL_GPL(hv_hypercall_pg);
u32 *hv_vp_index;
EXPORT_SYMBOL_GPL(hv_vp_index);
struct hv_vp_assist_page **hv_vp_assist_page;
EXPORT_SYMBOL_GPL(hv_vp_assist_page);
void __percpu **hyperv_pcpu_input_arg;
EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
u32 hv_max_vp_index;
EXPORT_SYMBOL_GPL(hv_max_vp_index);
void *hv_alloc_hyperv_page(void)
{
BUILD_BUG_ON(PAGE_SIZE != HV_HYP_PAGE_SIZE);
return (void *)__get_free_page(GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(hv_alloc_hyperv_page);
void hv_free_hyperv_page(unsigned long addr)
{
free_page(addr);
}
EXPORT_SYMBOL_GPL(hv_free_hyperv_page);
static int hv_cpu_init(unsigned int cpu)
{
u64 msr_vp_index;
struct hv_vp_assist_page **hvp = &hv_vp_assist_page[smp_processor_id()];
void **input_arg;
struct page *pg;
input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
pg = alloc_page(GFP_KERNEL);
if (unlikely(!pg))
return -ENOMEM;
*input_arg = page_address(pg);
hv_get_vp_index(msr_vp_index);
hv_vp_index[smp_processor_id()] = msr_vp_index;
if (msr_vp_index > hv_max_vp_index)
hv_max_vp_index = msr_vp_index;
if (!hv_vp_assist_page)
return 0;
/*
* The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section
* 5.2.1 "GPA Overlay Pages"). Here it must be zeroed out to make sure
* we always write the EOI MSR in hv_apic_eoi_write() *after* the
* EOI optimization is disabled in hv_cpu_die(), otherwise a CPU may
* not be stopped in the case of CPU offlining and the VM will hang.
*/
if (!*hvp) {
*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL | __GFP_ZERO,
PAGE_KERNEL);
}
if (*hvp) {
u64 val;
val = vmalloc_to_pfn(*hvp);
val = (val << HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT) |
HV_X64_MSR_VP_ASSIST_PAGE_ENABLE;
wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, val);
}
return 0;
}
static void (*hv_reenlightenment_cb)(void);
static void hv_reenlightenment_notify(struct work_struct *dummy)
{
struct hv_tsc_emulation_status emu_status;
rdmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
/* Don't issue the callback if TSC accesses are not emulated */
if (hv_reenlightenment_cb && emu_status.inprogress)
hv_reenlightenment_cb();
}
static DECLARE_DELAYED_WORK(hv_reenlightenment_work, hv_reenlightenment_notify);
void hyperv_stop_tsc_emulation(void)
{
u64 freq;
struct hv_tsc_emulation_status emu_status;
rdmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
emu_status.inprogress = 0;
wrmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
rdmsrl(HV_X64_MSR_TSC_FREQUENCY, freq);
tsc_khz = div64_u64(freq, 1000);
}
EXPORT_SYMBOL_GPL(hyperv_stop_tsc_emulation);
static inline bool hv_reenlightenment_available(void)
{
/*
* Check for required features and priviliges to make TSC frequency
* change notifications work.
*/
return ms_hyperv.features & HV_X64_ACCESS_FREQUENCY_MSRS &&
ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE &&
ms_hyperv.features & HV_X64_ACCESS_REENLIGHTENMENT;
}
__visible void __irq_entry hyperv_reenlightenment_intr(struct pt_regs *regs)
{
entering_ack_irq();
inc_irq_stat(irq_hv_reenlightenment_count);
schedule_delayed_work(&hv_reenlightenment_work, HZ/10);
exiting_irq();
}
void set_hv_tscchange_cb(void (*cb)(void))
{
struct hv_reenlightenment_control re_ctrl = {
.vector = HYPERV_REENLIGHTENMENT_VECTOR,
.enabled = 1,
.target_vp = hv_vp_index[smp_processor_id()]
};
struct hv_tsc_emulation_control emu_ctrl = {.enabled = 1};
if (!hv_reenlightenment_available()) {
pr_warn("Hyper-V: reenlightenment support is unavailable\n");
return;
}
hv_reenlightenment_cb = cb;
/* Make sure callback is registered before we write to MSRs */
wmb();
wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
wrmsrl(HV_X64_MSR_TSC_EMULATION_CONTROL, *((u64 *)&emu_ctrl));
}
EXPORT_SYMBOL_GPL(set_hv_tscchange_cb);
void clear_hv_tscchange_cb(void)
{
struct hv_reenlightenment_control re_ctrl;
if (!hv_reenlightenment_available())
return;
rdmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *(u64 *)&re_ctrl);
re_ctrl.enabled = 0;
wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *(u64 *)&re_ctrl);
hv_reenlightenment_cb = NULL;
}
EXPORT_SYMBOL_GPL(clear_hv_tscchange_cb);
static int hv_cpu_die(unsigned int cpu)
{
struct hv_reenlightenment_control re_ctrl;
unsigned int new_cpu;
unsigned long flags;
void **input_arg;
void *input_pg = NULL;
local_irq_save(flags);
input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
input_pg = *input_arg;
*input_arg = NULL;
local_irq_restore(flags);
free_page((unsigned long)input_pg);
if (hv_vp_assist_page && hv_vp_assist_page[cpu])
wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, 0);
if (hv_reenlightenment_cb == NULL)
return 0;
rdmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
if (re_ctrl.target_vp == hv_vp_index[cpu]) {
/* Reassign to some other online CPU */
new_cpu = cpumask_any_but(cpu_online_mask, cpu);
re_ctrl.target_vp = hv_vp_index[new_cpu];
wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
}
return 0;
}
static int __init hv_pci_init(void)
{
int gen2vm = efi_enabled(EFI_BOOT);
/*
* For Generation-2 VM, we exit from pci_arch_init() by returning 0.
* The purpose is to suppress the harmless warning:
* "PCI: Fatal: No config space access function found"
*/
if (gen2vm)
return 0;
/* For Generation-1 VM, we'll proceed in pci_arch_init(). */
return 1;
}
/*
* This function is to be invoked early in the boot sequence after the
* hypervisor has been detected.
*
* 1. Setup the hypercall page.
* 2. Register Hyper-V specific clocksource.
* 3. Setup Hyper-V specific APIC entry points.
*/
void __init hyperv_init(void)
{
u64 guest_id, required_msrs;
union hv_x64_msr_hypercall_contents hypercall_msr;
int cpuhp, i;
if (x86_hyper_type != X86_HYPER_MS_HYPERV)
return;
/* Absolutely required MSRs */
required_msrs = HV_X64_MSR_HYPERCALL_AVAILABLE |
HV_X64_MSR_VP_INDEX_AVAILABLE;
if ((ms_hyperv.features & required_msrs) != required_msrs)
return;
/*
* Allocate the per-CPU state for the hypercall input arg.
* If this allocation fails, we will not be able to setup
* (per-CPU) hypercall input page and thus this failure is
* fatal on Hyper-V.
*/
hyperv_pcpu_input_arg = alloc_percpu(void *);
BUG_ON(hyperv_pcpu_input_arg == NULL);
/* Allocate percpu VP index */
hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index),
GFP_KERNEL);
if (!hv_vp_index)
return;
for (i = 0; i < num_possible_cpus(); i++)
hv_vp_index[i] = VP_INVAL;
hv_vp_assist_page = kcalloc(num_possible_cpus(),
sizeof(*hv_vp_assist_page), GFP_KERNEL);
if (!hv_vp_assist_page) {
ms_hyperv.hints &= ~HV_X64_ENLIGHTENED_VMCS_RECOMMENDED;
goto free_vp_index;
}
cpuhp = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/hyperv_init:online",
hv_cpu_init, hv_cpu_die);
if (cpuhp < 0)
goto free_vp_assist_page;
/*
* Setup the hypercall page and enable hypercalls.
* 1. Register the guest ID
* 2. Enable the hypercall and register the hypercall page
*/
guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0);
wrmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
hv_hypercall_pg = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL_RX);
if (hv_hypercall_pg == NULL) {
wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
goto remove_cpuhp_state;
}
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
hypercall_msr.enable = 1;
hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
/*
* Ignore any errors in setting up stimer clockevents
* as we can run with the LAPIC timer as a fallback.
*/
(void)hv_stimer_alloc();
hv_apic_init();
x86_init.pci.arch_init = hv_pci_init;
return;
remove_cpuhp_state:
cpuhp_remove_state(cpuhp);
free_vp_assist_page:
kfree(hv_vp_assist_page);
hv_vp_assist_page = NULL;
free_vp_index:
kfree(hv_vp_index);
hv_vp_index = NULL;
}
/*
* This routine is called before kexec/kdump, it does the required cleanup.
*/
void hyperv_cleanup(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
/* Reset our OS id */
wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
/*
* Reset hypercall page reference before reset the page,
* let hypercall operations fail safely rather than
* panic the kernel for using invalid hypercall page
*/
hv_hypercall_pg = NULL;
/* Reset the hypercall page */
hypercall_msr.as_uint64 = 0;
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
/* Reset the TSC page */
hypercall_msr.as_uint64 = 0;
wrmsrl(HV_X64_MSR_REFERENCE_TSC, hypercall_msr.as_uint64);
}
EXPORT_SYMBOL_GPL(hyperv_cleanup);
void hyperv_report_panic(struct pt_regs *regs, long err)
{
static bool panic_reported;
u64 guest_id;
/*
* We prefer to report panic on 'die' chain as we have proper
* registers to report, but if we miss it (e.g. on BUG()) we need
* to report it on 'panic'.
*/
if (panic_reported)
return;
panic_reported = true;
rdmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
wrmsrl(HV_X64_MSR_CRASH_P0, err);
wrmsrl(HV_X64_MSR_CRASH_P1, guest_id);
wrmsrl(HV_X64_MSR_CRASH_P2, regs->ip);
wrmsrl(HV_X64_MSR_CRASH_P3, regs->ax);
wrmsrl(HV_X64_MSR_CRASH_P4, regs->sp);
/*
* Let Hyper-V know there is crash data available
*/
wrmsrl(HV_X64_MSR_CRASH_CTL, HV_CRASH_CTL_CRASH_NOTIFY);
}
EXPORT_SYMBOL_GPL(hyperv_report_panic);
/**
* hyperv_report_panic_msg - report panic message to Hyper-V
* @pa: physical address of the panic page containing the message
* @size: size of the message in the page
*/
void hyperv_report_panic_msg(phys_addr_t pa, size_t size)
{
/*
* P3 to contain the physical address of the panic page & P4 to
* contain the size of the panic data in that page. Rest of the
* registers are no-op when the NOTIFY_MSG flag is set.
*/
wrmsrl(HV_X64_MSR_CRASH_P0, 0);
wrmsrl(HV_X64_MSR_CRASH_P1, 0);
wrmsrl(HV_X64_MSR_CRASH_P2, 0);
wrmsrl(HV_X64_MSR_CRASH_P3, pa);
wrmsrl(HV_X64_MSR_CRASH_P4, size);
/*
* Let Hyper-V know there is crash data available along with
* the panic message.
*/
wrmsrl(HV_X64_MSR_CRASH_CTL,
(HV_CRASH_CTL_CRASH_NOTIFY | HV_CRASH_CTL_CRASH_NOTIFY_MSG));
}
EXPORT_SYMBOL_GPL(hyperv_report_panic_msg);
bool hv_is_hyperv_initialized(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
/*
* Ensure that we're really on Hyper-V, and not a KVM or Xen
* emulation of Hyper-V
*/
if (x86_hyper_type != X86_HYPER_MS_HYPERV)
return false;
/*
* Verify that earlier initialization succeeded by checking
* that the hypercall page is setup
*/
hypercall_msr.as_uint64 = 0;
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
return hypercall_msr.enable;
}
EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized);