AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 02:00:53 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
63b68901df
linux_dsm_epyc7002/drivers/mfd/omap-usb-host.c
Roger Quadros 63b68901df mfd: omap-usb-host: get rid of cpu_is_omap..() macros 
Instead of using cpu_is_omap..() macros in the device driver we
rely on information provided in the platform data.

The only information we need is whether the USB Host module has
a single ULPI bypass control bit for all ports or individual bypass
control bits for each port. OMAP3 REV2.1 and earlier have the former.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
[tony@atomide.com: updated to remove plat/cpu.h]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 11:48:06 -08:00

715 lines
19 KiB
C
Raw Blame History

/**
* omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h>
#include "omap-usb.h"
#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
/* OMAP USBHOST Register addresses */
/* UHH Register Set */
#define OMAP_UHH_REVISION (0x00)
#define OMAP_UHH_SYSCONFIG (0x10)
#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
#define OMAP_UHH_SYSSTATUS (0x14)
#define OMAP_UHH_HOSTCONFIG (0x40)
#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31)
/* OMAP4-specific defines */
#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
#define OMAP4_P1_MODE_CLEAR (3 << 16)
#define OMAP4_P1_MODE_TLL (1 << 16)
#define OMAP4_P1_MODE_HSIC (3 << 16)
#define OMAP4_P2_MODE_CLEAR (3 << 18)
#define OMAP4_P2_MODE_TLL (1 << 18)
#define OMAP4_P2_MODE_HSIC (3 << 18)
#define OMAP_UHH_DEBUG_CSR (0x44)
/* Values of UHH_REVISION - Note: these are not given in the TRM */
#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */
#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */
#define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1)
#define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2)
#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY)
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
struct usbhs_hcd_omap {
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
struct clk *utmi_p1_fck;
struct clk *usbhost_p1_fck;
struct clk *utmi_p2_fck;
struct clk *usbhost_p2_fck;
struct clk *init_60m_fclk;
struct clk *ehci_logic_fck;
void __iomem *uhh_base;
struct usbhs_omap_platform_data platdata;
u32 usbhs_rev;
spinlock_t lock;
};
/*-------------------------------------------------------------------------*/
const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
static u64 usbhs_dmamask = DMA_BIT_MASK(32);
/*-------------------------------------------------------------------------*/
static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
{
__raw_writel(val, base + reg);
}
static inline u32 usbhs_read(void __iomem *base, u32 reg)
{
return __raw_readl(base + reg);
}
static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
{
__raw_writeb(val, base + reg);
}
static inline u8 usbhs_readb(void __iomem *base, u8 reg)
{
return __raw_readb(base + reg);
}
/*-------------------------------------------------------------------------*/
static struct platform_device *omap_usbhs_alloc_child(const char *name,
struct resource *res, int num_resources, void *pdata,
size_t pdata_size, struct device *dev)
{
struct platform_device *child;
int ret;
child = platform_device_alloc(name, 0);
if (!child) {
dev_err(dev, "platform_device_alloc %s failed\n", name);
goto err_end;
}
ret = platform_device_add_resources(child, res, num_resources);
if (ret) {
dev_err(dev, "platform_device_add_resources failed\n");
goto err_alloc;
}
ret = platform_device_add_data(child, pdata, pdata_size);
if (ret) {
dev_err(dev, "platform_device_add_data failed\n");
goto err_alloc;
}
child->dev.dma_mask = &usbhs_dmamask;
dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
child->dev.parent = dev;
ret = platform_device_add(child);
if (ret) {
dev_err(dev, "platform_device_add failed\n");
goto err_alloc;
}
return child;
err_alloc:
platform_device_put(child);
err_end:
return NULL;
}
static int omap_usbhs_alloc_children(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbhs_hcd_omap *omap;
struct ehci_hcd_omap_platform_data *ehci_data;
struct ohci_hcd_omap_platform_data *ohci_data;
struct platform_device *ehci;
struct platform_device *ohci;
struct resource *res;
struct resource resources[2];
int ret;
omap = platform_get_drvdata(pdev);
ehci_data = omap->platdata.ehci_data;
ohci_data = omap->platdata.ohci_data;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
if (!res) {
dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
ret = -ENODEV;
goto err_end;
}
resources[0] = *res;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
if (!res) {
dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
ret = -ENODEV;
goto err_end;
}
resources[1] = *res;
ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
sizeof(*ehci_data), dev);
if (!ehci) {
dev_err(dev, "omap_usbhs_alloc_child failed\n");
ret = -ENOMEM;
goto err_end;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
if (!res) {
dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
ret = -ENODEV;
goto err_ehci;
}
resources[0] = *res;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
if (!res) {
dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
ret = -ENODEV;
goto err_ehci;
}
resources[1] = *res;
ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
sizeof(*ohci_data), dev);
if (!ohci) {
dev_err(dev, "omap_usbhs_alloc_child failed\n");
ret = -ENOMEM;
goto err_ehci;
}
return 0;
err_ehci:
platform_device_unregister(ehci);
err_end:
return ret;
}
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
switch (pmode) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
return true;
default:
return false;
}
}
static int usbhs_runtime_resume(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
unsigned long flags;
dev_dbg(dev, "usbhs_runtime_resume\n");
if (!pdata) {
dev_dbg(dev, "missing platform_data\n");
return -ENODEV;
}
omap_tll_enable();
spin_lock_irqsave(&omap->lock, flags);
if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
clk_enable(omap->ehci_logic_fck);
if (is_ehci_tll_mode(pdata->port_mode[0]))
clk_enable(omap->usbhost_p1_fck);
if (is_ehci_tll_mode(pdata->port_mode[1]))
clk_enable(omap->usbhost_p2_fck);
clk_enable(omap->utmi_p1_fck);
clk_enable(omap->utmi_p2_fck);
spin_unlock_irqrestore(&omap->lock, flags);
return 0;
}
static int usbhs_runtime_suspend(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
unsigned long flags;
dev_dbg(dev, "usbhs_runtime_suspend\n");
if (!pdata) {
dev_dbg(dev, "missing platform_data\n");
return -ENODEV;
}
spin_lock_irqsave(&omap->lock, flags);
if (is_ehci_tll_mode(pdata->port_mode[0]))
clk_disable(omap->usbhost_p1_fck);
if (is_ehci_tll_mode(pdata->port_mode[1]))
clk_disable(omap->usbhost_p2_fck);
clk_disable(omap->utmi_p2_fck);
clk_disable(omap->utmi_p1_fck);
if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
clk_disable(omap->ehci_logic_fck);
spin_unlock_irqrestore(&omap->lock, flags);
omap_tll_disable();
return 0;
}
static void omap_usbhs_init(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
unsigned long flags;
unsigned reg;
dev_dbg(dev, "starting TI HSUSB Controller\n");
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
}
pm_runtime_get_sync(dev);
spin_lock_irqsave(&omap->lock, flags);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
if (is_omap_usbhs_rev1(omap)) {
if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
/* Bypass the TLL module for PHY mode operation */
if (pdata->single_ulpi_bypass) {
dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
if (is_ehci_phy_mode(pdata->port_mode[0]) ||
is_ehci_phy_mode(pdata->port_mode[1]) ||
is_ehci_phy_mode(pdata->port_mode[2]))
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
else
reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
} else {
dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
if (is_ehci_phy_mode(pdata->port_mode[0]))
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
else
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
if (is_ehci_phy_mode(pdata->port_mode[1]))
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
else
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
if (is_ehci_phy_mode(pdata->port_mode[2]))
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
else
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
}
} else if (is_omap_usbhs_rev2(omap)) {
/* Clear port mode fields for PHY mode*/
reg &= ~OMAP4_P1_MODE_CLEAR;
reg &= ~OMAP4_P2_MODE_CLEAR;
if (is_ehci_tll_mode(pdata->port_mode[0]) ||
(is_ohci_port(pdata->port_mode[0])))
reg |= OMAP4_P1_MODE_TLL;
else if (is_ehci_hsic_mode(pdata->port_mode[0]))
reg |= OMAP4_P1_MODE_HSIC;
if (is_ehci_tll_mode(pdata->port_mode[1]) ||
(is_ohci_port(pdata->port_mode[1])))
reg |= OMAP4_P2_MODE_TLL;
else if (is_ehci_hsic_mode(pdata->port_mode[1]))
reg |= OMAP4_P2_MODE_HSIC;
}
usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
spin_unlock_irqrestore(&omap->lock, flags);
pm_runtime_put_sync(dev);
if (pdata->ehci_data->phy_reset) {
/* Hold the PHY in RESET for enough time till
* PHY is settled and ready
*/
udelay(10);
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_set_value_cansleep
(pdata->ehci_data->reset_gpio_port[0], 1);
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_set_value_cansleep
(pdata->ehci_data->reset_gpio_port[1], 1);
}
}
static void omap_usbhs_deinit(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_free(pdata->ehci_data->reset_gpio_port[0]);
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_free(pdata->ehci_data->reset_gpio_port[1]);
}
}
/**
* usbhs_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller.
*/
static int usbhs_omap_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbhs_omap_platform_data *pdata = dev->platform_data;
struct usbhs_hcd_omap *omap;
struct resource *res;
int ret = 0;
int i;
if (!pdata) {
dev_err(dev, "Missing platform data\n");
ret = -ENOMEM;
goto end_probe;
}
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
if (!omap) {
dev_err(dev, "Memory allocation failed\n");
ret = -ENOMEM;
goto end_probe;
}
spin_lock_init(&omap->lock);
for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
omap->platdata.port_mode[i] = pdata->port_mode[i];
omap->platdata.ehci_data = pdata->ehci_data;
omap->platdata.ohci_data = pdata->ohci_data;
pm_runtime_enable(dev);
for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
is_ehci_hsic_mode(i)) {
omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
if (IS_ERR(omap->ehci_logic_fck)) {
ret = PTR_ERR(omap->ehci_logic_fck);
dev_warn(dev, "ehci_logic_fck failed:%d\n",
ret);
}
break;
}
omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_fck)) {
ret = PTR_ERR(omap->utmi_p1_fck);
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
goto err_end;
}
omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
if (IS_ERR(omap->xclk60mhsp1_ck)) {
ret = PTR_ERR(omap->xclk60mhsp1_ck);
dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
goto err_utmi_p1_fck;
}
omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
if (IS_ERR(omap->utmi_p2_fck)) {
ret = PTR_ERR(omap->utmi_p2_fck);
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
goto err_xclk60mhsp1_ck;
}
omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
if (IS_ERR(omap->xclk60mhsp2_ck)) {
ret = PTR_ERR(omap->xclk60mhsp2_ck);
dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
goto err_utmi_p2_fck;
}
omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
if (IS_ERR(omap->usbhost_p1_fck)) {
ret = PTR_ERR(omap->usbhost_p1_fck);
dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
goto err_xclk60mhsp2_ck;
}
omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
if (IS_ERR(omap->usbhost_p2_fck)) {
ret = PTR_ERR(omap->usbhost_p2_fck);
dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
goto err_usbhost_p1_fck;
}
omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
if (IS_ERR(omap->init_60m_fclk)) {
ret = PTR_ERR(omap->init_60m_fclk);
dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
goto err_usbhost_p2_fck;
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
/* for OMAP3 , the clk set paretn fails */
ret = clk_set_parent(omap->utmi_p1_fck,
omap->xclk60mhsp1_ck);
if (ret != 0)
dev_err(dev, "xclk60mhsp1_ck set parent"
"failed error:%d\n", ret);
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_p1_fck,
omap->init_60m_fclk);
if (ret != 0)
dev_err(dev, "init_60m_fclk set parent"
"failed error:%d\n", ret);
}
if (is_ehci_phy_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_fck,
omap->xclk60mhsp2_ck);
if (ret != 0)
dev_err(dev, "xclk60mhsp2_ck set parent"
"failed error:%d\n", ret);
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_fck,
omap->init_60m_fclk);
if (ret != 0)
dev_err(dev, "init_60m_fclk set parent"
"failed error:%d\n", ret);
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
if (!res) {
dev_err(dev, "UHH EHCI get resource failed\n");
ret = -ENODEV;
goto err_init_60m_fclk;
}
omap->uhh_base = ioremap(res->start, resource_size(res));
if (!omap->uhh_base) {
dev_err(dev, "UHH ioremap failed\n");
ret = -ENOMEM;
goto err_init_60m_fclk;
}
platform_set_drvdata(pdev, omap);
omap_usbhs_init(dev);
ret = omap_usbhs_alloc_children(pdev);
if (ret) {
dev_err(dev, "omap_usbhs_alloc_children failed\n");
goto err_alloc;
}
goto end_probe;
err_alloc:
omap_usbhs_deinit(&pdev->dev);
iounmap(omap->uhh_base);
err_init_60m_fclk:
clk_put(omap->init_60m_fclk);
err_usbhost_p2_fck:
clk_put(omap->usbhost_p2_fck);
err_usbhost_p1_fck:
clk_put(omap->usbhost_p1_fck);
err_xclk60mhsp2_ck:
clk_put(omap->xclk60mhsp2_ck);
err_utmi_p2_fck:
clk_put(omap->utmi_p2_fck);
err_xclk60mhsp1_ck:
clk_put(omap->xclk60mhsp1_ck);
err_utmi_p1_fck:
clk_put(omap->utmi_p1_fck);
err_end:
clk_put(omap->ehci_logic_fck);
pm_runtime_disable(dev);
kfree(omap);
end_probe:
return ret;
}
/**
* usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
* @pdev: USB Host Controller being removed
*
* Reverses the effect of usbhs_omap_probe().
*/
static int usbhs_omap_remove(struct platform_device *pdev)
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
omap_usbhs_deinit(&pdev->dev);
iounmap(omap->uhh_base);
clk_put(omap->init_60m_fclk);
clk_put(omap->usbhost_p2_fck);
clk_put(omap->usbhost_p1_fck);
clk_put(omap->xclk60mhsp2_ck);
clk_put(omap->utmi_p2_fck);
clk_put(omap->xclk60mhsp1_ck);
clk_put(omap->utmi_p1_fck);
clk_put(omap->ehci_logic_fck);
pm_runtime_disable(&pdev->dev);
kfree(omap);
return 0;
}
static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
.runtime_suspend = usbhs_runtime_suspend,
.runtime_resume = usbhs_runtime_resume,
};
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
.pm = &usbhsomap_dev_pm_ops,
},
.remove = __exit_p(usbhs_omap_remove),
};
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
static int __init omap_usbhs_drvinit(void)
{
return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
}
/*
* init before ehci and ohci drivers;
* The usbhs core driver should be initialized much before
* the omap ehci and ohci probe functions are called.
* This usbhs core driver should be initialized after
* usb tll driver
*/
fs_initcall_sync(omap_usbhs_drvinit);
static void __exit omap_usbhs_drvexit(void)
{
platform_driver_unregister(&usbhs_omap_driver);
}
module_exit(omap_usbhs_drvexit);
Reference in New Issue View Git Blame Copy Permalink