linux_dsm_epyc7002/drivers/usb/host
Petr Mladek 37ebb54915 usb: hub: rename khubd to hub_wq in documentation and comments
USB hub has started to use a workqueue instead of kthread. Let's update
the documentation and comments here and there.

This patch mostly just replaces "khubd" with "hub_wq". There are only few
exceptions where the whole sentence was updated. These more complicated
changes can be found in the following files:

	   Documentation/usb/hotplug.txt
	   drivers/net/usb/usbnet.c
	   drivers/usb/core/hcd.c
	   drivers/usb/host/ohci-hcd.c
	   drivers/usb/host/xhci.c

Signed-off-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 22:33:19 -07:00
..
whci usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
bcma-hcd.c DMA-API: usb: bcma: replace dma_set_mask()+dma_set_coherent_mask() with new helper 2013-10-31 14:48:34 +00:00
ehci-atmel.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-dbg.c usb: Use dev_is_pci() to check whether it is pci device 2013-12-08 18:01:56 -08:00
ehci-exynos.c usb: ehci/ohci-exynos: Fix PHY getting sequence 2014-09-08 15:38:21 -07:00
ehci-fsl.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
ehci-fsl.h
ehci-grlib.c USB: ehci-grlib: use dev_err() instead of printk() 2013-12-18 16:32:41 -08:00
ehci-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
ehci-hub.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
ehci-mem.c USB: EHCI: don't allocate hardware periodic table atomically by default 2014-07-09 16:16:07 -07:00
ehci-msm.c USB: ehci-msm: Make of_device_id array const 2014-07-09 16:13:03 -07:00
ehci-mv.c usb: host: ehci-mv: Use devm_ioremap_resource instead of devm_ioremap 2014-05-27 14:52:29 -07:00
ehci-mxc.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-octeon.c USB: ehci-octeon: Use devm_ioremap_resource() 2013-12-18 16:34:20 -08:00
ehci-omap.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-orion.c usb: ehci-orion: add optional PHY support 2014-05-27 15:33:12 -07:00
ehci-pci.c USB: ehci-pci: USB host controller support for Intel Quark X1000 2014-07-09 16:16:07 -07:00
ehci-platform.c usb: ehci-platform: add optional reset controller retrieval 2014-05-27 15:53:01 -07:00
ehci-pmcmsp.c MIPS: MSP71xx: Remove checks for two macros 2014-05-23 15:12:39 +02:00
ehci-ppc-of.c USB: ehci-ppc-of: use dev_err() instead of printk() 2013-12-18 16:32:41 -08:00
ehci-ps3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-q.c usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
ehci-sched.c USB: EHCI: fix sparse errors 2013-10-19 14:08:04 -07:00
ehci-sead3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-sh.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-spear.c USB: ehci-spear: Make of_device_id array const 2014-07-09 16:13:03 -07:00
ehci-st.c usb: host: ehci-st: Add EHCI support for ST STB devices 2014-09-23 21:35:50 -07:00
ehci-sysfs.c USB: EHCI: use a bandwidth-allocation table 2013-10-11 16:45:43 -07:00
ehci-tegra.c USB: EHCI: tegra: Fix probe order issue leading to broken USB 2014-07-09 16:25:46 -07:00
ehci-tilegx.c tile: usb: Use irq_alloc/free_hwirq 2014-05-16 14:05:20 +02:00
ehci-timer.c USB: EHCI: improve interrupt qh unlink 2013-08-12 11:43:48 -07:00
ehci-w90x900.c USB: ehci-w90x900: Use devm_ioremap_resource() 2013-12-18 16:35:11 -08:00
ehci-xilinx-of.c drivers/usb/host/ehci-xilinx-of.c: Include "linux/of_irq.h" to avoid compiling error 2014-09-23 22:09:46 -07:00
ehci.h USB: EHCI: Export the ehci_hub_control function 2014-04-24 13:05:32 -07:00
fhci-dbg.c drivers/usb/host/fhci-dbg.c: remove unnecessary null test before debugfs_remove 2014-07-09 16:13:03 -07:00
fhci-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
fhci-hub.c
fhci-mem.c
fhci-q.c
fhci-sched.c USB: FHCI: upgrade the isochronous API 2013-05-30 21:34:31 +09:00
fhci-tds.c
fhci.h USB: FHCI: upgrade the isochronous API 2013-05-30 21:34:31 +09:00
fotg210-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
fotg210.h fotg210: remove conditional compilation 2013-12-03 10:28:39 -08:00
fsl-mph-dr-of.c USB: fsl-mph-dr-of: adjust for OF based clock lookup 2014-01-12 18:53:05 +01:00
fusbh200-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
fusbh200.h fusb200h: always compile in debugfs support 2013-12-03 10:31:21 -08:00
hwa-hc.c usb: wusbcore: disable transfer notifications for Alereon HWAs 2014-03-07 12:52:04 -08:00
imx21-dbg.c usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
imx21-hcd.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
imx21-hcd.h usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
isp116x-hcd.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
isp116x.h USB: isp116x: remove dependency on CONFIG_USB_DEBUG 2013-07-23 16:35:17 -07:00
isp1362-hcd.c USB: isp1362: Use devm_ioremap_resource 2014-09-23 21:33:10 -07:00
isp1362.h USB: isp1362: move debug files from proc to debugfs 2013-07-24 14:43:05 -07:00
isp1760-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
isp1760-hcd.h
isp1760-if.c USB: host: use dev_get_platdata() 2013-07-31 17:53:50 -07:00
Kconfig usb: hwa: add USB build dependency for USB_HWA_HCD 2014-09-23 22:06:33 -07:00
Makefile usb: host: ohci-st: Add OHCI driver support for ST STB devices 2014-09-23 21:35:50 -07:00
max3421-hcd.c usb: host: max3421-hcd: unconditionally use GFP_ATOMIC in max3421_urb_enqueue() 2014-07-09 16:06:50 -07:00
octeon2-common.c
ohci-at91.c USB: OHCI: Export the OHCI hub control and status_data functions 2014-04-24 13:05:32 -07:00
ohci-da8xx.c USB: ohci-da8xx: Use devm_*() functions 2013-12-18 16:35:11 -08:00
ohci-dbg.c USB: OHCI: fix bugs in debug routines 2014-07-17 17:05:07 -07:00
ohci-exynos.c usb: host: ohci-exynos: Remove unnecessary usb-phy support 2014-09-23 21:53:48 -07:00
ohci-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
ohci-hub.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
ohci-jz4740.c USB: ohci-jz4740: FEAT_POWER is a port feature, not a hub feature 2014-04-16 13:59:41 -07:00
ohci-mem.c USB: OHCI: add I/O watchdog for orphan TDs 2014-07-18 16:34:07 -07:00
ohci-nxp.c USB: ohci-nxp: Use devm_clk_get() 2013-12-18 16:36:10 -08:00
ohci-octeon.c USB: ohci-octeon: Use devm_ioremap_resource() 2013-12-18 16:36:11 -08:00
ohci-omap3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-omap.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
ohci-pci.c USB: OHCI: fix problem with global suspend on ATI controllers 2014-05-03 17:58:46 -04:00
ohci-platform.c usb: ohci-platform: Enable optional use of reset controller 2014-05-27 15:53:00 -07:00
ohci-ppc-of.c USB: ohci-ppc-of: Use devm_ioremap_resource() 2013-12-18 16:36:10 -08:00
ohci-ps3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-pxa27x.c USB: ohci-pxa27x: Add support for external vbus regulators 2014-04-24 13:05:32 -07:00
ohci-q.c USB: OHCI: add I/O watchdog for orphan TDs 2014-07-18 16:34:07 -07:00
ohci-s3c2410.c USB: OHCI: Export the OHCI hub control and status_data functions 2014-04-24 13:05:32 -07:00
ohci-sa1111.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-sm501.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-spear.c USB: ohci-spear: Make of_device_id array const 2014-07-09 16:13:03 -07:00
ohci-st.c usb: host: ohci-st: Add OHCI driver support for ST STB devices 2014-09-23 21:35:50 -07:00
ohci-tilegx.c tile: usb: Use irq_alloc/free_hwirq 2014-05-16 14:05:20 +02:00
ohci-tmio.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
ohci.h USB: OHCI: add check for stopped frame counter 2014-07-18 16:34:29 -07:00
oxu210hp-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
oxu210hp.h
pci-quirks.c USB: EHCI: avoid BIOS handover on the HASEE E200 2014-06-17 17:05:49 -07:00
pci-quirks.h usb: pci_quirks: fix sparse 'symbol not declared' warning 2014-05-27 16:25:32 -07:00
r8a66597-hcd.c ARM: driver updates for 3.14 2014-01-23 18:49:36 -08:00
r8a66597.h
sl811_cs.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
sl811-hcd.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
sl811.h USB: sl811: move debug files from proc to debugfs 2013-07-24 14:43:05 -07:00
ssb-hcd.c DMA-API: usb: ssb-hcd: replace dma_set_mask()+dma_set_coherent_mask() with new helper 2013-10-31 14:48:36 +00:00
u132-hcd.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
uhci-debug.c usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
uhci-grlib.c usb: host: uhci-grlib.c : use devm_ functions 2014-07-09 16:25:22 -07:00
uhci-hcd.c USB: UHCI: don't allocate frame list atomically 2014-07-09 16:16:07 -07:00
uhci-hcd.h USB: UHCI: remove unused definition 2013-01-24 13:42:09 -08:00
uhci-hub.c USB/host: Bugfix: Return length of copied buffer in uhci_hub_control() 2013-10-07 00:07:17 -07:00
uhci-pci.c USB: remove DEFINE_PCI_DEVICE_TABLE macro 2013-12-04 16:58:47 -08:00
uhci-platform.c uhci-platform: use devm_ioremap resource 2014-07-09 16:31:48 -07:00
uhci-q.c USB: UHCI: accept very late isochronous URBs 2013-09-25 17:05:34 -07:00
xhci-dbg.c Revert "xhci: replace xhci_read_64() with readq()" 2014-01-30 13:27:49 -08:00
xhci-ext-caps.h xhci: fix port BESL LPM capability checking 2013-08-27 08:54:42 -07:00
xhci-hub.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
xhci-mem.c xhci: Log extra info on "ERROR Transfer event TRB DMA ptr not part of current TD" 2014-09-23 21:46:11 -07:00
xhci-mvebu.c usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers 2014-05-27 15:40:40 -07:00
xhci-mvebu.h usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers 2014-05-27 15:40:40 -07:00
xhci-pci.c xhci: Disable streams on Via XHCI with device-id 0x3432 2014-08-27 13:35:38 -07:00
xhci-plat.c usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
xhci-rcar.c usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
xhci-rcar.h usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
xhci-ring.c xhci: Log extra info on "ERROR Transfer event TRB DMA ptr not part of current TD" 2014-09-23 21:46:11 -07:00
xhci-trace.c xhci: add traces for debug messages in xhci_address_device() 2013-08-13 16:05:38 -07:00
xhci-trace.h xhci: fix sparse warning in xhci-trace.h 2013-12-02 12:59:45 -08:00
xhci.c usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
xhci.h xhci: Log extra info on "ERROR Transfer event TRB DMA ptr not part of current TD" 2014-09-23 21:46:11 -07:00