mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 23:56:39 +07:00
5796d1c4c8
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
779 lines
19 KiB
C
779 lines
19 KiB
C
/*
|
|
* sata_inic162x.c - Driver for Initio 162x SATA controllers
|
|
*
|
|
* Copyright 2006 SUSE Linux Products GmbH
|
|
* Copyright 2006 Tejun Heo <teheo@novell.com>
|
|
*
|
|
* This file is released under GPL v2.
|
|
*
|
|
* This controller is eccentric and easily locks up if something isn't
|
|
* right. Documentation is available at initio's website but it only
|
|
* documents registers (not programming model).
|
|
*
|
|
* - ATA disks work.
|
|
* - Hotplug works.
|
|
* - ATAPI read works but burning doesn't. This thing is really
|
|
* peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
|
|
* ATAPI DMA WRITE should be programmed. If you've got a clue, be
|
|
* my guest.
|
|
* - Both STR and STD work.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/blkdev.h>
|
|
#include <scsi/scsi_device.h>
|
|
|
|
#define DRV_NAME "sata_inic162x"
|
|
#define DRV_VERSION "0.3"
|
|
|
|
enum {
|
|
MMIO_BAR = 5,
|
|
|
|
NR_PORTS = 2,
|
|
|
|
HOST_CTL = 0x7c,
|
|
HOST_STAT = 0x7e,
|
|
HOST_IRQ_STAT = 0xbc,
|
|
HOST_IRQ_MASK = 0xbe,
|
|
|
|
PORT_SIZE = 0x40,
|
|
|
|
/* registers for ATA TF operation */
|
|
PORT_TF = 0x00,
|
|
PORT_ALT_STAT = 0x08,
|
|
PORT_IRQ_STAT = 0x09,
|
|
PORT_IRQ_MASK = 0x0a,
|
|
PORT_PRD_CTL = 0x0b,
|
|
PORT_PRD_ADDR = 0x0c,
|
|
PORT_PRD_XFERLEN = 0x10,
|
|
|
|
/* IDMA register */
|
|
PORT_IDMA_CTL = 0x14,
|
|
|
|
PORT_SCR = 0x20,
|
|
|
|
/* HOST_CTL bits */
|
|
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
|
|
HCTL_PWRDWN = (1 << 13), /* power down PHYs */
|
|
HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
|
|
HCTL_RPGSEL = (1 << 15), /* register page select */
|
|
|
|
HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
|
|
HCTL_RPGSEL,
|
|
|
|
/* HOST_IRQ_(STAT|MASK) bits */
|
|
HIRQ_PORT0 = (1 << 0),
|
|
HIRQ_PORT1 = (1 << 1),
|
|
HIRQ_SOFT = (1 << 14),
|
|
HIRQ_GLOBAL = (1 << 15), /* STAT only */
|
|
|
|
/* PORT_IRQ_(STAT|MASK) bits */
|
|
PIRQ_OFFLINE = (1 << 0), /* device unplugged */
|
|
PIRQ_ONLINE = (1 << 1), /* device plugged */
|
|
PIRQ_COMPLETE = (1 << 2), /* completion interrupt */
|
|
PIRQ_FATAL = (1 << 3), /* fatal error */
|
|
PIRQ_ATA = (1 << 4), /* ATA interrupt */
|
|
PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */
|
|
PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
|
|
|
|
PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
|
|
|
|
PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA,
|
|
PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE,
|
|
PIRQ_MASK_FREEZE = 0xff,
|
|
|
|
/* PORT_PRD_CTL bits */
|
|
PRD_CTL_START = (1 << 0),
|
|
PRD_CTL_WR = (1 << 3),
|
|
PRD_CTL_DMAEN = (1 << 7), /* DMA enable */
|
|
|
|
/* PORT_IDMA_CTL bits */
|
|
IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
|
|
IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
|
|
IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
|
|
IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
|
|
};
|
|
|
|
struct inic_host_priv {
|
|
u16 cached_hctl;
|
|
};
|
|
|
|
struct inic_port_priv {
|
|
u8 dfl_prdctl;
|
|
u8 cached_prdctl;
|
|
u8 cached_pirq_mask;
|
|
};
|
|
|
|
static int inic_slave_config(struct scsi_device *sdev)
|
|
{
|
|
/* This controller is braindamaged. dma_boundary is 0xffff
|
|
* like others but it will lock up the whole machine HARD if
|
|
* 65536 byte PRD entry is fed. Reduce maximum segment size.
|
|
*/
|
|
blk_queue_max_segment_size(sdev->request_queue, 65536 - 512);
|
|
|
|
return ata_scsi_slave_config(sdev);
|
|
}
|
|
|
|
static struct scsi_host_template inic_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = inic_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const int scr_map[] = {
|
|
[SCR_STATUS] = 0,
|
|
[SCR_ERROR] = 1,
|
|
[SCR_CONTROL] = 2,
|
|
};
|
|
|
|
static void __iomem *inic_port_base(struct ata_port *ap)
|
|
{
|
|
return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
|
|
}
|
|
|
|
static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
|
|
writeb(mask, port_base + PORT_IRQ_MASK);
|
|
pp->cached_pirq_mask = mask;
|
|
}
|
|
|
|
static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
|
|
{
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
|
|
if (pp->cached_pirq_mask != mask)
|
|
__inic_set_pirq_mask(ap, mask);
|
|
}
|
|
|
|
static void inic_reset_port(void __iomem *port_base)
|
|
{
|
|
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
|
|
u16 ctl;
|
|
|
|
ctl = readw(idma_ctl);
|
|
ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
|
|
|
|
/* mask IRQ and assert reset */
|
|
writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
|
|
readw(idma_ctl); /* flush */
|
|
|
|
/* give it some time */
|
|
msleep(1);
|
|
|
|
/* release reset */
|
|
writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
|
|
|
|
/* clear irq */
|
|
writeb(0xff, port_base + PORT_IRQ_STAT);
|
|
|
|
/* reenable ATA IRQ, turn off IDMA mode */
|
|
writew(ctl, idma_ctl);
|
|
}
|
|
|
|
static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
|
|
{
|
|
void __iomem *scr_addr = ap->ioaddr.scr_addr;
|
|
void __iomem *addr;
|
|
|
|
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
|
|
return -EINVAL;
|
|
|
|
addr = scr_addr + scr_map[sc_reg] * 4;
|
|
*val = readl(scr_addr + scr_map[sc_reg] * 4);
|
|
|
|
/* this controller has stuck DIAG.N, ignore it */
|
|
if (sc_reg == SCR_ERROR)
|
|
*val &= ~SERR_PHYRDY_CHG;
|
|
return 0;
|
|
}
|
|
|
|
static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
|
|
{
|
|
void __iomem *scr_addr = ap->ioaddr.scr_addr;
|
|
void __iomem *addr;
|
|
|
|
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
|
|
return -EINVAL;
|
|
|
|
addr = scr_addr + scr_map[sc_reg] * 4;
|
|
writel(val, scr_addr + scr_map[sc_reg] * 4);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* In TF mode, inic162x is very similar to SFF device. TF registers
|
|
* function the same. DMA engine behaves similary using the same PRD
|
|
* format as BMDMA but different command register, interrupt and event
|
|
* notification methods are used. The following inic_bmdma_*()
|
|
* functions do the impedance matching.
|
|
*/
|
|
static void inic_bmdma_setup(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
int rw = qc->tf.flags & ATA_TFLAG_WRITE;
|
|
|
|
/* make sure device sees PRD table writes */
|
|
wmb();
|
|
|
|
/* load transfer length */
|
|
writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
|
|
|
|
/* turn on DMA and specify data direction */
|
|
pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
|
|
if (!rw)
|
|
pp->cached_prdctl |= PRD_CTL_WR;
|
|
writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
|
|
|
|
/* issue r/w command */
|
|
ap->ops->exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
static void inic_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
/* start host DMA transaction */
|
|
pp->cached_prdctl |= PRD_CTL_START;
|
|
writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
|
|
}
|
|
|
|
static void inic_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
/* stop DMA engine */
|
|
writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
|
|
}
|
|
|
|
static u8 inic_bmdma_status(struct ata_port *ap)
|
|
{
|
|
/* event is already verified by the interrupt handler */
|
|
return ATA_DMA_INTR;
|
|
}
|
|
|
|
static void inic_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* noop */
|
|
}
|
|
|
|
static void inic_host_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
u8 irq_stat;
|
|
|
|
/* fetch and clear irq */
|
|
irq_stat = readb(port_base + PORT_IRQ_STAT);
|
|
writeb(irq_stat, port_base + PORT_IRQ_STAT);
|
|
|
|
if (likely(!(irq_stat & PIRQ_ERR))) {
|
|
struct ata_queued_cmd *qc =
|
|
ata_qc_from_tag(ap, ap->link.active_tag);
|
|
|
|
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
ata_chk_status(ap); /* clear ATA interrupt */
|
|
return;
|
|
}
|
|
|
|
if (likely(ata_host_intr(ap, qc)))
|
|
return;
|
|
|
|
ata_chk_status(ap); /* clear ATA interrupt */
|
|
ata_port_printk(ap, KERN_WARNING, "unhandled "
|
|
"interrupt, irq_stat=%x\n", irq_stat);
|
|
return;
|
|
}
|
|
|
|
/* error */
|
|
ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
|
|
|
|
if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_port_freeze(ap);
|
|
} else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static irqreturn_t inic_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
void __iomem *mmio_base = host->iomap[MMIO_BAR];
|
|
u16 host_irq_stat;
|
|
int i, handled = 0;;
|
|
|
|
host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
|
|
|
|
if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
|
|
goto out;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (!(host_irq_stat & (HIRQ_PORT0 << i)))
|
|
continue;
|
|
|
|
if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
|
|
inic_host_intr(ap);
|
|
handled++;
|
|
} else {
|
|
if (ata_ratelimit())
|
|
dev_printk(KERN_ERR, host->dev, "interrupt "
|
|
"from disabled port %d (0x%x)\n",
|
|
i, host_irq_stat);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* ATA IRQ doesn't wait for DMA transfer completion and vice
|
|
* versa. Mask IRQ selectively to detect command completion.
|
|
* Without it, ATA DMA read command can cause data corruption.
|
|
*
|
|
* Something similar might be needed for ATAPI writes. I
|
|
* tried a lot of combinations but couldn't find the solution.
|
|
*/
|
|
if (qc->tf.protocol == ATA_PROT_DMA &&
|
|
!(qc->tf.flags & ATA_TFLAG_WRITE))
|
|
inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
|
|
else
|
|
inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
|
|
|
|
/* Issuing a command to yet uninitialized port locks up the
|
|
* controller. Most of the time, this happens for the first
|
|
* command after reset which are ATA and ATAPI IDENTIFYs.
|
|
* Fast fail if stat is 0x7f or 0xff for those commands.
|
|
*/
|
|
if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
|
|
qc->tf.command == ATA_CMD_ID_ATAPI)) {
|
|
u8 stat = ata_chk_status(ap);
|
|
if (stat == 0x7f || stat == 0xff)
|
|
return AC_ERR_HSM;
|
|
}
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static void inic_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
|
|
|
|
ata_chk_status(ap);
|
|
writeb(0xff, port_base + PORT_IRQ_STAT);
|
|
|
|
readb(port_base + PORT_IRQ_STAT); /* flush */
|
|
}
|
|
|
|
static void inic_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
ata_chk_status(ap);
|
|
writeb(0xff, port_base + PORT_IRQ_STAT);
|
|
|
|
__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
|
|
|
|
readb(port_base + PORT_IRQ_STAT); /* flush */
|
|
}
|
|
|
|
/*
|
|
* SRST and SControl hardreset don't give valid signature on this
|
|
* controller. Only controller specific hardreset mechanism works.
|
|
*/
|
|
static int inic_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
|
|
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
|
|
u16 val;
|
|
int rc;
|
|
|
|
/* hammer it into sane state */
|
|
inic_reset_port(port_base);
|
|
|
|
val = readw(idma_ctl);
|
|
writew(val | IDMA_CTL_RST_ATA, idma_ctl);
|
|
readw(idma_ctl); /* flush */
|
|
msleep(1);
|
|
writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
|
|
|
|
rc = sata_link_resume(link, timing, deadline);
|
|
if (rc) {
|
|
ata_link_printk(link, KERN_WARNING, "failed to resume "
|
|
"link after reset (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
*class = ATA_DEV_NONE;
|
|
if (ata_link_online(link)) {
|
|
struct ata_taskfile tf;
|
|
|
|
/* wait a while before checking status */
|
|
ata_wait_after_reset(ap, deadline);
|
|
|
|
rc = ata_wait_ready(ap, deadline);
|
|
/* link occupied, -ENODEV too is an error */
|
|
if (rc) {
|
|
ata_link_printk(link, KERN_WARNING, "device not ready "
|
|
"after hardreset (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
ata_tf_read(ap, &tf);
|
|
*class = ata_dev_classify(&tf);
|
|
if (*class == ATA_DEV_UNKNOWN)
|
|
*class = ATA_DEV_NONE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void inic_error_handler(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
unsigned long flags;
|
|
|
|
/* reset PIO HSM and stop DMA engine */
|
|
inic_reset_port(port_base);
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
ap->hsm_task_state = HSM_ST_IDLE;
|
|
writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
/* PIO and DMA engines have been stopped, perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
inic_reset_port(inic_port_base(qc->ap));
|
|
}
|
|
|
|
static void inic_dev_config(struct ata_device *dev)
|
|
{
|
|
/* inic can only handle upto LBA28 max sectors */
|
|
if (dev->max_sectors > ATA_MAX_SECTORS)
|
|
dev->max_sectors = ATA_MAX_SECTORS;
|
|
|
|
if (dev->n_sectors >= 1 << 28) {
|
|
ata_dev_printk(dev, KERN_ERR,
|
|
"ERROR: This driver doesn't support LBA48 yet and may cause\n"
|
|
" data corruption on such devices. Disabling.\n");
|
|
ata_dev_disable(dev);
|
|
}
|
|
}
|
|
|
|
static void init_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
/* Setup PRD address */
|
|
writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
|
|
}
|
|
|
|
static int inic_port_resume(struct ata_port *ap)
|
|
{
|
|
init_port(ap);
|
|
return 0;
|
|
}
|
|
|
|
static int inic_port_start(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct inic_port_priv *pp;
|
|
u8 tmp;
|
|
int rc;
|
|
|
|
/* alloc and initialize private data */
|
|
pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
ap->private_data = pp;
|
|
|
|
/* default PRD_CTL value, DMAEN, WR and START off */
|
|
tmp = readb(port_base + PORT_PRD_CTL);
|
|
tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
|
|
pp->dfl_prdctl = tmp;
|
|
|
|
/* Alloc resources */
|
|
rc = ata_port_start(ap);
|
|
if (rc) {
|
|
kfree(pp);
|
|
return rc;
|
|
}
|
|
|
|
init_port(ap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ata_port_operations inic_port_ops = {
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.scr_read = inic_scr_read,
|
|
.scr_write = inic_scr_write,
|
|
|
|
.bmdma_setup = inic_bmdma_setup,
|
|
.bmdma_start = inic_bmdma_start,
|
|
.bmdma_stop = inic_bmdma_stop,
|
|
.bmdma_status = inic_bmdma_status,
|
|
|
|
.irq_clear = inic_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = inic_qc_issue,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.freeze = inic_freeze,
|
|
.thaw = inic_thaw,
|
|
.error_handler = inic_error_handler,
|
|
.post_internal_cmd = inic_post_internal_cmd,
|
|
.dev_config = inic_dev_config,
|
|
|
|
.port_resume = inic_port_resume,
|
|
|
|
.port_start = inic_port_start,
|
|
};
|
|
|
|
static struct ata_port_info inic_port_info = {
|
|
/* For some reason, ATA_PROT_ATAPI is broken on this
|
|
* controller, and no, PIO_POLLING does't fix it. It somehow
|
|
* manages to report the wrong ireason and ignoring ireason
|
|
* results in machine lock up. Tell libata to always prefer
|
|
* DMA.
|
|
*/
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &inic_port_ops
|
|
};
|
|
|
|
static int init_controller(void __iomem *mmio_base, u16 hctl)
|
|
{
|
|
int i;
|
|
u16 val;
|
|
|
|
hctl &= ~HCTL_KNOWN_BITS;
|
|
|
|
/* Soft reset whole controller. Spec says reset duration is 3
|
|
* PCI clocks, be generous and give it 10ms.
|
|
*/
|
|
writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
|
|
readw(mmio_base + HOST_CTL); /* flush */
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
msleep(1);
|
|
val = readw(mmio_base + HOST_CTL);
|
|
if (!(val & HCTL_SOFTRST))
|
|
break;
|
|
}
|
|
|
|
if (val & HCTL_SOFTRST)
|
|
return -EIO;
|
|
|
|
/* mask all interrupts and reset ports */
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
void __iomem *port_base = mmio_base + i * PORT_SIZE;
|
|
|
|
writeb(0xff, port_base + PORT_IRQ_MASK);
|
|
inic_reset_port(port_base);
|
|
}
|
|
|
|
/* port IRQ is masked now, unmask global IRQ */
|
|
writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
|
|
val = readw(mmio_base + HOST_IRQ_MASK);
|
|
val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
|
|
writew(val, mmio_base + HOST_IRQ_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int inic_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
struct inic_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio_base = host->iomap[MMIO_BAR];
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
|
|
rc = init_controller(mmio_base, hpriv->cached_hctl);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
|
|
struct ata_host *host;
|
|
struct inic_host_priv *hpriv;
|
|
void __iomem * const *iomap;
|
|
int i, rc;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* alloc host */
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
|
|
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!host || !hpriv)
|
|
return -ENOMEM;
|
|
|
|
host->private_data = hpriv;
|
|
|
|
/* acquire resources and fill host */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = iomap = pcim_iomap_table(pdev);
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
struct ata_ioports *port = &ap->ioaddr;
|
|
unsigned int offset = i * PORT_SIZE;
|
|
|
|
port->cmd_addr = iomap[2 * i];
|
|
port->altstatus_addr =
|
|
port->ctl_addr = (void __iomem *)
|
|
((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
|
|
port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
|
|
|
|
ata_std_ports(port);
|
|
|
|
ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
|
|
ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
|
|
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
|
|
(unsigned long long)pci_resource_start(pdev, 2 * i),
|
|
(unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
|
|
ATA_PCI_CTL_OFS);
|
|
}
|
|
|
|
hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
|
|
|
|
/* Set dma_mask. This devices doesn't support 64bit addressing. */
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"failed to initialize controller\n");
|
|
return rc;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
|
|
&inic_sht);
|
|
}
|
|
|
|
static const struct pci_device_id inic_pci_tbl[] = {
|
|
{ PCI_VDEVICE(INIT, 0x1622), },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver inic_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = inic_pci_tbl,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = inic_pci_device_resume,
|
|
#endif
|
|
.probe = inic_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static int __init inic_init(void)
|
|
{
|
|
return pci_register_driver(&inic_pci_driver);
|
|
}
|
|
|
|
static void __exit inic_exit(void)
|
|
{
|
|
pci_unregister_driver(&inic_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Tejun Heo");
|
|
MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(inic_init);
|
|
module_exit(inic_exit);
|