mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 18:06:39 +07:00
3a4fa0a25d
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
309 lines
8.0 KiB
C
309 lines
8.0 KiB
C
/*
|
|
* pata_radisys.c - Intel PATA/SATA controllers
|
|
*
|
|
* (C) 2006 Red Hat <alan@redhat.com>
|
|
*
|
|
* Some parts based on ata_piix.c by Jeff Garzik and others.
|
|
*
|
|
* A PIIX relative, this device has a single ATA channel and no
|
|
* slave timings, SITRE or PPE. In that sense it is a close relative
|
|
* of the original PIIX. It does however support UDMA 33/66 per channel
|
|
* although no other modes/timings. Also lacking is 32bit I/O on the ATA
|
|
* port.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/ata.h>
|
|
|
|
#define DRV_NAME "pata_radisys"
|
|
#define DRV_VERSION "0.4.4"
|
|
|
|
/**
|
|
* radisys_set_piomode - Initialize host controller PATA PIO timings
|
|
* @ap: ATA port
|
|
* @adev: Device whose timings we are configuring
|
|
*
|
|
* Set PIO mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
u16 idetm_data;
|
|
int control = 0;
|
|
|
|
/*
|
|
* See Intel Document 298600-004 for the timing programing rules
|
|
* for PIIX/ICH. Note that the early PIIX does not have the slave
|
|
* timing port at 0x44. The Radisys is a relative of the PIIX
|
|
* but not the same so be careful.
|
|
*/
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 }, /* Check me */
|
|
{ 0, 0 },
|
|
{ 1, 1 },
|
|
{ 2, 2 },
|
|
{ 3, 3 }, };
|
|
|
|
if (pio > 0)
|
|
control |= 1; /* TIME1 enable */
|
|
if (ata_pio_need_iordy(adev))
|
|
control |= 2; /* IE IORDY */
|
|
|
|
pci_read_config_word(dev, 0x40, &idetm_data);
|
|
|
|
/* Enable IE and TIME as appropriate. Clear the other
|
|
drive timing bits */
|
|
idetm_data &= 0xCCCC;
|
|
idetm_data |= (control << (4 * adev->devno));
|
|
idetm_data |= (timings[pio][0] << 12) |
|
|
(timings[pio][1] << 8);
|
|
pci_write_config_word(dev, 0x40, idetm_data);
|
|
|
|
/* Track which port is configured */
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* radisys_set_dmamode - Initialize host controller PATA DMA timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: Device to program
|
|
* @isich: True if the device is an ICH and has IOCFG registers
|
|
*
|
|
* Set MWDMA mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
u16 idetm_data;
|
|
u8 udma_enable;
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 1 },
|
|
{ 2, 2 },
|
|
{ 3, 3 }, };
|
|
|
|
/*
|
|
* MWDMA is driven by the PIO timings. We must also enable
|
|
* IORDY unconditionally.
|
|
*/
|
|
|
|
pci_read_config_word(dev, 0x40, &idetm_data);
|
|
pci_read_config_byte(dev, 0x48, &udma_enable);
|
|
|
|
if (adev->dma_mode < XFER_UDMA_0) {
|
|
unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
|
|
const unsigned int needed_pio[3] = {
|
|
XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
|
|
};
|
|
int pio = needed_pio[mwdma] - XFER_PIO_0;
|
|
int control = 3; /* IORDY|TIME0 */
|
|
|
|
/* If the drive MWDMA is faster than it can do PIO then
|
|
we must force PIO0 for PIO cycles. */
|
|
|
|
if (adev->pio_mode < needed_pio[mwdma])
|
|
control = 1;
|
|
|
|
/* Mask out the relevant control and timing bits we will load. Also
|
|
clear the other drive TIME register as a precaution */
|
|
|
|
idetm_data &= 0xCCCC;
|
|
idetm_data |= control << (4 * adev->devno);
|
|
idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
|
|
udma_enable &= ~(1 << adev->devno);
|
|
} else {
|
|
u8 udma_mode;
|
|
|
|
/* UDMA66 on: UDMA 33 and 66 are switchable via register 0x4A */
|
|
|
|
pci_read_config_byte(dev, 0x4A, &udma_mode);
|
|
|
|
if (adev->xfer_mode == XFER_UDMA_2)
|
|
udma_mode &= ~ (1 << adev->devno);
|
|
else /* UDMA 4 */
|
|
udma_mode |= (1 << adev->devno);
|
|
|
|
pci_write_config_byte(dev, 0x4A, udma_mode);
|
|
|
|
udma_enable |= (1 << adev->devno);
|
|
}
|
|
pci_write_config_word(dev, 0x40, idetm_data);
|
|
pci_write_config_byte(dev, 0x48, udma_enable);
|
|
|
|
/* Track which port is configured */
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* radisys_qc_issue_prot - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* necessary. Our logic also clears TIME0/TIME1 for the other device so
|
|
* that, even if we get this wrong, cycles to the other device will
|
|
* be made PIO0.
|
|
*/
|
|
|
|
static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
if (adev != ap->private_data) {
|
|
/* UDMA timing is not shared */
|
|
if (adev->dma_mode < XFER_UDMA_0) {
|
|
if (adev->dma_mode)
|
|
radisys_set_dmamode(ap, adev);
|
|
else if (adev->pio_mode)
|
|
radisys_set_piomode(ap, adev);
|
|
}
|
|
}
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
|
|
static struct scsi_host_template radisys_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations radisys_pata_ops = {
|
|
.set_piomode = radisys_set_piomode,
|
|
.set_dmamode = radisys_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_unknown,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = radisys_qc_issue_prot,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_sff_port_start,
|
|
};
|
|
|
|
|
|
/**
|
|
* radisys_init_one - Register PIIX ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in radisys_pci_tbl matching with @pdev
|
|
*
|
|
* Called from kernel PCI layer. We probe for combined mode (sigh),
|
|
* and then hand over control to libata, for it to do the rest.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
static const struct ata_port_info info = {
|
|
.sht = &radisys_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma1-2 */
|
|
.udma_mask = 0x14, /* UDMA33/66 only */
|
|
.port_ops = &radisys_pata_ops,
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"version " DRV_VERSION "\n");
|
|
|
|
return ata_pci_init_one(pdev, ppi);
|
|
}
|
|
|
|
static const struct pci_device_id radisys_pci_tbl[] = {
|
|
{ PCI_VDEVICE(RADISYS, 0x8201), },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver radisys_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = radisys_pci_tbl,
|
|
.probe = radisys_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init radisys_init(void)
|
|
{
|
|
return pci_register_driver(&radisys_pci_driver);
|
|
}
|
|
|
|
static void __exit radisys_exit(void)
|
|
{
|
|
pci_unregister_driver(&radisys_pci_driver);
|
|
}
|
|
|
|
module_init(radisys_init);
|
|
module_exit(radisys_exit);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Radisys R82600 controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, radisys_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|