mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 13:46:47 +07:00
50d5676eba
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
610 lines
15 KiB
C
610 lines
15 KiB
C
/*
|
|
* BRIEF MODULE DESCRIPTION
|
|
* AMD Alchemy Au1xxx IDE interface routines over the Static Bus
|
|
*
|
|
* Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it under
|
|
* the terms of the GNU General Public License as published by the Free Software
|
|
* Foundation; either version 2 of the License, or (at your option) any later
|
|
* version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
|
|
* FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
|
|
* Interface and Linux Device Driver" Application Note.
|
|
*/
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
#include <asm/mach-au1x00/au1xxx_dbdma.h>
|
|
#include <asm/mach-au1x00/au1xxx_ide.h>
|
|
|
|
#define DRV_NAME "au1200-ide"
|
|
#define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
|
|
|
|
#ifndef IDE_REG_SHIFT
|
|
#define IDE_REG_SHIFT 5
|
|
#endif
|
|
|
|
/* enable the burstmode in the dbdma */
|
|
#define IDE_AU1XXX_BURSTMODE 1
|
|
|
|
static _auide_hwif auide_hwif;
|
|
|
|
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
|
|
|
|
static inline void auide_insw(unsigned long port, void *addr, u32 count)
|
|
{
|
|
_auide_hwif *ahwif = &auide_hwif;
|
|
chan_tab_t *ctp;
|
|
au1x_ddma_desc_t *dp;
|
|
|
|
if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr),
|
|
count << 1, DDMA_FLAGS_NOIE)) {
|
|
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
|
|
return;
|
|
}
|
|
ctp = *((chan_tab_t **)ahwif->rx_chan);
|
|
dp = ctp->cur_ptr;
|
|
while (dp->dscr_cmd0 & DSCR_CMD0_V)
|
|
;
|
|
ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
|
|
}
|
|
|
|
static inline void auide_outsw(unsigned long port, void *addr, u32 count)
|
|
{
|
|
_auide_hwif *ahwif = &auide_hwif;
|
|
chan_tab_t *ctp;
|
|
au1x_ddma_desc_t *dp;
|
|
|
|
if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr),
|
|
count << 1, DDMA_FLAGS_NOIE)) {
|
|
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
|
|
return;
|
|
}
|
|
ctp = *((chan_tab_t **)ahwif->tx_chan);
|
|
dp = ctp->cur_ptr;
|
|
while (dp->dscr_cmd0 & DSCR_CMD0_V)
|
|
;
|
|
ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
|
|
}
|
|
|
|
static void au1xxx_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
|
|
void *buf, unsigned int len)
|
|
{
|
|
auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
|
|
}
|
|
|
|
static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
|
|
void *buf, unsigned int len)
|
|
{
|
|
auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
|
|
}
|
|
#endif
|
|
|
|
static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
|
|
|
|
switch (drive->pio_mode - XFER_PIO_0) {
|
|
case 0:
|
|
mem_sttime = SBC_IDE_TIMING(PIO0);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg |= TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
|
|
break;
|
|
|
|
case 1:
|
|
mem_sttime = SBC_IDE_TIMING(PIO1);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg |= TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
|
|
break;
|
|
|
|
case 2:
|
|
mem_sttime = SBC_IDE_TIMING(PIO2);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg &= ~TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
|
|
break;
|
|
|
|
case 3:
|
|
mem_sttime = SBC_IDE_TIMING(PIO3);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg &= ~TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
mem_sttime = SBC_IDE_TIMING(PIO4);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg &= ~TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
|
|
break;
|
|
}
|
|
|
|
au_writel(mem_sttime,MEM_STTIME2);
|
|
au_writel(mem_stcfg,MEM_STCFG2);
|
|
}
|
|
|
|
static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
|
|
|
|
switch (drive->dma_mode) {
|
|
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
|
|
case XFER_MW_DMA_2:
|
|
mem_sttime = SBC_IDE_TIMING(MDMA2);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg &= ~TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
|
|
|
|
break;
|
|
case XFER_MW_DMA_1:
|
|
mem_sttime = SBC_IDE_TIMING(MDMA1);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg &= ~TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
|
|
|
|
break;
|
|
case XFER_MW_DMA_0:
|
|
mem_sttime = SBC_IDE_TIMING(MDMA0);
|
|
|
|
/* set configuration for RCS2# */
|
|
mem_stcfg |= TS_MASK;
|
|
mem_stcfg &= ~TCSOE_MASK;
|
|
mem_stcfg &= ~TOECS_MASK;
|
|
mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
|
|
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
au_writel(mem_sttime,MEM_STTIME2);
|
|
au_writel(mem_stcfg,MEM_STCFG2);
|
|
}
|
|
|
|
/*
|
|
* Multi-Word DMA + DbDMA functions
|
|
*/
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
|
|
static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
_auide_hwif *ahwif = &auide_hwif;
|
|
struct scatterlist *sg;
|
|
int i = cmd->sg_nents, count = 0;
|
|
int iswrite = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
|
|
|
|
/* Save for interrupt context */
|
|
ahwif->drive = drive;
|
|
|
|
/* fill the descriptors */
|
|
sg = hwif->sg_table;
|
|
while (i && sg_dma_len(sg)) {
|
|
u32 cur_addr;
|
|
u32 cur_len;
|
|
|
|
cur_addr = sg_dma_address(sg);
|
|
cur_len = sg_dma_len(sg);
|
|
|
|
while (cur_len) {
|
|
u32 flags = DDMA_FLAGS_NOIE;
|
|
unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
|
|
|
|
if (++count >= PRD_ENTRIES) {
|
|
printk(KERN_WARNING "%s: DMA table too small\n",
|
|
drive->name);
|
|
return 0;
|
|
}
|
|
|
|
/* Lets enable intr for the last descriptor only */
|
|
if (1==i)
|
|
flags = DDMA_FLAGS_IE;
|
|
else
|
|
flags = DDMA_FLAGS_NOIE;
|
|
|
|
if (iswrite) {
|
|
if (!au1xxx_dbdma_put_source(ahwif->tx_chan,
|
|
sg_phys(sg), tc, flags)) {
|
|
printk(KERN_ERR "%s failed %d\n",
|
|
__func__, __LINE__);
|
|
}
|
|
} else {
|
|
if (!au1xxx_dbdma_put_dest(ahwif->rx_chan,
|
|
sg_phys(sg), tc, flags)) {
|
|
printk(KERN_ERR "%s failed %d\n",
|
|
__func__, __LINE__);
|
|
}
|
|
}
|
|
|
|
cur_addr += tc;
|
|
cur_len -= tc;
|
|
}
|
|
sg = sg_next(sg);
|
|
i--;
|
|
}
|
|
|
|
if (count)
|
|
return 1;
|
|
|
|
return 0; /* revert to PIO for this request */
|
|
}
|
|
|
|
static int auide_dma_end(ide_drive_t *drive)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void auide_dma_start(ide_drive_t *drive )
|
|
{
|
|
}
|
|
|
|
|
|
static int auide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
|
|
{
|
|
if (auide_build_dmatable(drive, cmd) == 0)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int auide_dma_test_irq(ide_drive_t *drive)
|
|
{
|
|
/* If dbdma didn't execute the STOP command yet, the
|
|
* active bit is still set
|
|
*/
|
|
drive->waiting_for_dma++;
|
|
if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
|
|
printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n",
|
|
drive->name);
|
|
return 1;
|
|
}
|
|
udelay(10);
|
|
return 0;
|
|
}
|
|
|
|
static void auide_dma_host_set(ide_drive_t *drive, int on)
|
|
{
|
|
}
|
|
|
|
static void auide_ddma_tx_callback(int irq, void *param)
|
|
{
|
|
}
|
|
|
|
static void auide_ddma_rx_callback(int irq, void *param)
|
|
{
|
|
}
|
|
#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
|
|
|
|
static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize,
|
|
u32 devwidth, u32 flags, u32 regbase)
|
|
{
|
|
dev->dev_id = dev_id;
|
|
dev->dev_physaddr = CPHYSADDR(regbase);
|
|
dev->dev_intlevel = 0;
|
|
dev->dev_intpolarity = 0;
|
|
dev->dev_tsize = tsize;
|
|
dev->dev_devwidth = devwidth;
|
|
dev->dev_flags = flags;
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
|
|
static const struct ide_dma_ops au1xxx_dma_ops = {
|
|
.dma_host_set = auide_dma_host_set,
|
|
.dma_setup = auide_dma_setup,
|
|
.dma_start = auide_dma_start,
|
|
.dma_end = auide_dma_end,
|
|
.dma_test_irq = auide_dma_test_irq,
|
|
.dma_lost_irq = ide_dma_lost_irq,
|
|
};
|
|
|
|
static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
|
|
{
|
|
_auide_hwif *auide = &auide_hwif;
|
|
dbdev_tab_t source_dev_tab, target_dev_tab;
|
|
u32 dev_id, tsize, devwidth, flags;
|
|
|
|
dev_id = hwif->ddma_id;
|
|
|
|
tsize = 8; /* 1 */
|
|
devwidth = 32; /* 16 */
|
|
|
|
#ifdef IDE_AU1XXX_BURSTMODE
|
|
flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
|
|
#else
|
|
flags = DEV_FLAGS_SYNC;
|
|
#endif
|
|
|
|
/* setup dev_tab for tx channel */
|
|
auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
|
|
DEV_FLAGS_OUT | flags, auide->regbase);
|
|
auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
|
|
|
|
auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
|
|
DEV_FLAGS_IN | flags, auide->regbase);
|
|
auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
|
|
|
|
/* We also need to add a target device for the DMA */
|
|
auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize,
|
|
devwidth, DEV_FLAGS_ANYUSE, auide->regbase);
|
|
auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);
|
|
|
|
/* Get a channel for TX */
|
|
auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
|
|
auide->tx_dev_id,
|
|
auide_ddma_tx_callback,
|
|
(void*)auide);
|
|
|
|
/* Get a channel for RX */
|
|
auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
|
|
auide->target_dev_id,
|
|
auide_ddma_rx_callback,
|
|
(void*)auide);
|
|
|
|
auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
|
|
NUM_DESCRIPTORS);
|
|
auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
|
|
NUM_DESCRIPTORS);
|
|
|
|
/* FIXME: check return value */
|
|
(void)ide_allocate_dma_engine(hwif);
|
|
|
|
au1xxx_dbdma_start( auide->tx_chan );
|
|
au1xxx_dbdma_start( auide->rx_chan );
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
|
|
{
|
|
_auide_hwif *auide = &auide_hwif;
|
|
dbdev_tab_t source_dev_tab;
|
|
int flags;
|
|
|
|
#ifdef IDE_AU1XXX_BURSTMODE
|
|
flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
|
|
#else
|
|
flags = DEV_FLAGS_SYNC;
|
|
#endif
|
|
|
|
/* setup dev_tab for tx channel */
|
|
auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
|
|
DEV_FLAGS_OUT | flags, auide->regbase);
|
|
auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
|
|
|
|
auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
|
|
DEV_FLAGS_IN | flags, auide->regbase);
|
|
auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
|
|
|
|
/* Get a channel for TX */
|
|
auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
|
|
auide->tx_dev_id,
|
|
NULL,
|
|
(void*)auide);
|
|
|
|
/* Get a channel for RX */
|
|
auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
|
|
DSCR_CMD0_ALWAYS,
|
|
NULL,
|
|
(void*)auide);
|
|
|
|
auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
|
|
NUM_DESCRIPTORS);
|
|
auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
|
|
NUM_DESCRIPTORS);
|
|
|
|
au1xxx_dbdma_start( auide->tx_chan );
|
|
au1xxx_dbdma_start( auide->rx_chan );
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void auide_setup_ports(struct ide_hw *hw, _auide_hwif *ahwif)
|
|
{
|
|
int i;
|
|
unsigned long *ata_regs = hw->io_ports_array;
|
|
|
|
/* FIXME? */
|
|
for (i = 0; i < 8; i++)
|
|
*ata_regs++ = ahwif->regbase + (i << IDE_REG_SHIFT);
|
|
|
|
/* set the Alternative Status register */
|
|
*ata_regs = ahwif->regbase + (14 << IDE_REG_SHIFT);
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
|
|
static const struct ide_tp_ops au1xxx_tp_ops = {
|
|
.exec_command = ide_exec_command,
|
|
.read_status = ide_read_status,
|
|
.read_altstatus = ide_read_altstatus,
|
|
.write_devctl = ide_write_devctl,
|
|
|
|
.dev_select = ide_dev_select,
|
|
.tf_load = ide_tf_load,
|
|
.tf_read = ide_tf_read,
|
|
|
|
.input_data = au1xxx_input_data,
|
|
.output_data = au1xxx_output_data,
|
|
};
|
|
#endif
|
|
|
|
static const struct ide_port_ops au1xxx_port_ops = {
|
|
.set_pio_mode = au1xxx_set_pio_mode,
|
|
.set_dma_mode = auide_set_dma_mode,
|
|
};
|
|
|
|
static const struct ide_port_info au1xxx_port_info = {
|
|
.init_dma = auide_ddma_init,
|
|
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
|
|
.tp_ops = &au1xxx_tp_ops,
|
|
#endif
|
|
.port_ops = &au1xxx_port_ops,
|
|
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
|
|
.dma_ops = &au1xxx_dma_ops,
|
|
#endif
|
|
.host_flags = IDE_HFLAG_POST_SET_MODE |
|
|
IDE_HFLAG_NO_IO_32BIT |
|
|
IDE_HFLAG_UNMASK_IRQS,
|
|
.pio_mask = ATA_PIO4,
|
|
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
#endif
|
|
.chipset = ide_au1xxx,
|
|
};
|
|
|
|
static int au_ide_probe(struct platform_device *dev)
|
|
{
|
|
_auide_hwif *ahwif = &auide_hwif;
|
|
struct resource *res;
|
|
struct ide_host *host;
|
|
int ret = 0;
|
|
struct ide_hw hw, *hws[] = { &hw };
|
|
|
|
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
|
|
char *mode = "MWDMA2";
|
|
#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
|
|
char *mode = "PIO+DDMA(offload)";
|
|
#endif
|
|
|
|
memset(&auide_hwif, 0, sizeof(_auide_hwif));
|
|
ahwif->irq = platform_get_irq(dev, 0);
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
|
|
if (res == NULL) {
|
|
pr_debug("%s %d: no base address\n", DRV_NAME, dev->id);
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
if (ahwif->irq < 0) {
|
|
pr_debug("%s %d: no IRQ\n", DRV_NAME, dev->id);
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
if (!request_mem_region(res->start, resource_size(res), dev->name)) {
|
|
pr_debug("%s: request_mem_region failed\n", DRV_NAME);
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
ahwif->regbase = (u32)ioremap(res->start, resource_size(res));
|
|
if (ahwif->regbase == 0) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_DMA, 0);
|
|
if (!res) {
|
|
pr_debug("%s: no DDMA ID resource\n", DRV_NAME);
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
ahwif->ddma_id = res->start;
|
|
|
|
memset(&hw, 0, sizeof(hw));
|
|
auide_setup_ports(&hw, ahwif);
|
|
hw.irq = ahwif->irq;
|
|
hw.dev = &dev->dev;
|
|
|
|
ret = ide_host_add(&au1xxx_port_info, hws, 1, &host);
|
|
if (ret)
|
|
goto out;
|
|
|
|
auide_hwif.hwif = host->ports[0];
|
|
|
|
platform_set_drvdata(dev, host);
|
|
|
|
printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int au_ide_remove(struct platform_device *dev)
|
|
{
|
|
struct resource *res;
|
|
struct ide_host *host = platform_get_drvdata(dev);
|
|
_auide_hwif *ahwif = &auide_hwif;
|
|
|
|
ide_host_remove(host);
|
|
|
|
iounmap((void *)ahwif->regbase);
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
release_mem_region(res->start, resource_size(res));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver au1200_ide_driver = {
|
|
.driver = {
|
|
.name = "au1200-ide",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = au_ide_probe,
|
|
.remove = au_ide_remove,
|
|
};
|
|
|
|
static int __init au_ide_init(void)
|
|
{
|
|
return platform_driver_register(&au1200_ide_driver);
|
|
}
|
|
|
|
static void __exit au_ide_exit(void)
|
|
{
|
|
platform_driver_unregister(&au1200_ide_driver);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("AU1200 IDE driver");
|
|
|
|
module_init(au_ide_init);
|
|
module_exit(au_ide_exit);
|