mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 04:45:23 +07:00
6136f97cd2
Some wacom w9013 devices have a vddl supply for "low valtage" requirements. Add support in this driver to turn on this low voltage supply. We can also drop a handful of error messages because the regulator core is already printing an error when bulk regulators fail to enable or disable. Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
46 lines
1.5 KiB
Plaintext
46 lines
1.5 KiB
Plaintext
* HID over I2C Device-Tree bindings
|
|
|
|
HID over I2C provides support for various Human Interface Devices over the
|
|
I2C bus. These devices can be for example touchpads, keyboards, touch screens
|
|
or sensors.
|
|
|
|
The specification has been written by Microsoft and is currently available here:
|
|
http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
|
|
|
|
If this binding is used, the kernel module i2c-hid will handle the communication
|
|
with the device and the generic hid core layer will handle the protocol.
|
|
|
|
Required properties:
|
|
- compatible: must be "hid-over-i2c"
|
|
- reg: i2c slave address
|
|
- hid-descr-addr: HID descriptor address
|
|
- interrupt-parent: the phandle for the interrupt controller
|
|
- interrupts: interrupt line
|
|
|
|
Additional optional properties:
|
|
|
|
Some devices may support additional optional properties to help with, e.g.,
|
|
power sequencing. The following properties can be supported by one or more
|
|
device-specific compatible properties, which should be used in addition to the
|
|
"hid-over-i2c" string.
|
|
|
|
- compatible:
|
|
* "wacom,w9013" (Wacom W9013 digitizer). Supports:
|
|
- vdd-supply (3.3V)
|
|
- vddl-supply (1.8V)
|
|
- post-power-on-delay-ms
|
|
|
|
- vdd-supply: phandle of the regulator that provides the supply voltage.
|
|
- post-power-on-delay-ms: time required by the device after enabling its regulators
|
|
or powering it on, before it is ready for communication.
|
|
|
|
Example:
|
|
|
|
i2c-hid-dev@2c {
|
|
compatible = "hid-over-i2c";
|
|
reg = <0x2c>;
|
|
hid-descr-addr = <0x0020>;
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <3 2>;
|
|
};
|