mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
fa79f20047
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190904135918.25352-27-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
446 lines
13 KiB
C
446 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright 2018 SiFive, Inc.
|
|
//
|
|
// SiFive SPI controller driver (master mode only)
|
|
//
|
|
// Author: SiFive, Inc.
|
|
// sifive@sifive.com
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/io.h>
|
|
#include <linux/log2.h>
|
|
|
|
#define SIFIVE_SPI_DRIVER_NAME "sifive_spi"
|
|
|
|
#define SIFIVE_SPI_MAX_CS 32
|
|
#define SIFIVE_SPI_DEFAULT_DEPTH 8
|
|
#define SIFIVE_SPI_DEFAULT_MAX_BITS 8
|
|
|
|
/* register offsets */
|
|
#define SIFIVE_SPI_REG_SCKDIV 0x00 /* Serial clock divisor */
|
|
#define SIFIVE_SPI_REG_SCKMODE 0x04 /* Serial clock mode */
|
|
#define SIFIVE_SPI_REG_CSID 0x10 /* Chip select ID */
|
|
#define SIFIVE_SPI_REG_CSDEF 0x14 /* Chip select default */
|
|
#define SIFIVE_SPI_REG_CSMODE 0x18 /* Chip select mode */
|
|
#define SIFIVE_SPI_REG_DELAY0 0x28 /* Delay control 0 */
|
|
#define SIFIVE_SPI_REG_DELAY1 0x2c /* Delay control 1 */
|
|
#define SIFIVE_SPI_REG_FMT 0x40 /* Frame format */
|
|
#define SIFIVE_SPI_REG_TXDATA 0x48 /* Tx FIFO data */
|
|
#define SIFIVE_SPI_REG_RXDATA 0x4c /* Rx FIFO data */
|
|
#define SIFIVE_SPI_REG_TXMARK 0x50 /* Tx FIFO watermark */
|
|
#define SIFIVE_SPI_REG_RXMARK 0x54 /* Rx FIFO watermark */
|
|
#define SIFIVE_SPI_REG_FCTRL 0x60 /* SPI flash interface control */
|
|
#define SIFIVE_SPI_REG_FFMT 0x64 /* SPI flash instruction format */
|
|
#define SIFIVE_SPI_REG_IE 0x70 /* Interrupt Enable Register */
|
|
#define SIFIVE_SPI_REG_IP 0x74 /* Interrupt Pendings Register */
|
|
|
|
/* sckdiv bits */
|
|
#define SIFIVE_SPI_SCKDIV_DIV_MASK 0xfffU
|
|
|
|
/* sckmode bits */
|
|
#define SIFIVE_SPI_SCKMODE_PHA BIT(0)
|
|
#define SIFIVE_SPI_SCKMODE_POL BIT(1)
|
|
#define SIFIVE_SPI_SCKMODE_MODE_MASK (SIFIVE_SPI_SCKMODE_PHA | \
|
|
SIFIVE_SPI_SCKMODE_POL)
|
|
|
|
/* csmode bits */
|
|
#define SIFIVE_SPI_CSMODE_MODE_AUTO 0U
|
|
#define SIFIVE_SPI_CSMODE_MODE_HOLD 2U
|
|
#define SIFIVE_SPI_CSMODE_MODE_OFF 3U
|
|
|
|
/* delay0 bits */
|
|
#define SIFIVE_SPI_DELAY0_CSSCK(x) ((u32)(x))
|
|
#define SIFIVE_SPI_DELAY0_CSSCK_MASK 0xffU
|
|
#define SIFIVE_SPI_DELAY0_SCKCS(x) ((u32)(x) << 16)
|
|
#define SIFIVE_SPI_DELAY0_SCKCS_MASK (0xffU << 16)
|
|
|
|
/* delay1 bits */
|
|
#define SIFIVE_SPI_DELAY1_INTERCS(x) ((u32)(x))
|
|
#define SIFIVE_SPI_DELAY1_INTERCS_MASK 0xffU
|
|
#define SIFIVE_SPI_DELAY1_INTERXFR(x) ((u32)(x) << 16)
|
|
#define SIFIVE_SPI_DELAY1_INTERXFR_MASK (0xffU << 16)
|
|
|
|
/* fmt bits */
|
|
#define SIFIVE_SPI_FMT_PROTO_SINGLE 0U
|
|
#define SIFIVE_SPI_FMT_PROTO_DUAL 1U
|
|
#define SIFIVE_SPI_FMT_PROTO_QUAD 2U
|
|
#define SIFIVE_SPI_FMT_PROTO_MASK 3U
|
|
#define SIFIVE_SPI_FMT_ENDIAN BIT(2)
|
|
#define SIFIVE_SPI_FMT_DIR BIT(3)
|
|
#define SIFIVE_SPI_FMT_LEN(x) ((u32)(x) << 16)
|
|
#define SIFIVE_SPI_FMT_LEN_MASK (0xfU << 16)
|
|
|
|
/* txdata bits */
|
|
#define SIFIVE_SPI_TXDATA_DATA_MASK 0xffU
|
|
#define SIFIVE_SPI_TXDATA_FULL BIT(31)
|
|
|
|
/* rxdata bits */
|
|
#define SIFIVE_SPI_RXDATA_DATA_MASK 0xffU
|
|
#define SIFIVE_SPI_RXDATA_EMPTY BIT(31)
|
|
|
|
/* ie and ip bits */
|
|
#define SIFIVE_SPI_IP_TXWM BIT(0)
|
|
#define SIFIVE_SPI_IP_RXWM BIT(1)
|
|
|
|
struct sifive_spi {
|
|
void __iomem *regs; /* virt. address of control registers */
|
|
struct clk *clk; /* bus clock */
|
|
unsigned int fifo_depth; /* fifo depth in words */
|
|
u32 cs_inactive; /* level of the CS pins when inactive */
|
|
struct completion done; /* wake-up from interrupt */
|
|
};
|
|
|
|
static void sifive_spi_write(struct sifive_spi *spi, int offset, u32 value)
|
|
{
|
|
iowrite32(value, spi->regs + offset);
|
|
}
|
|
|
|
static u32 sifive_spi_read(struct sifive_spi *spi, int offset)
|
|
{
|
|
return ioread32(spi->regs + offset);
|
|
}
|
|
|
|
static void sifive_spi_init(struct sifive_spi *spi)
|
|
{
|
|
/* Watermark interrupts are disabled by default */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
|
|
|
|
/* Default watermark FIFO threshold values */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_TXMARK, 1);
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_RXMARK, 0);
|
|
|
|
/* Set CS/SCK Delays and Inactive Time to defaults */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_DELAY0,
|
|
SIFIVE_SPI_DELAY0_CSSCK(1) |
|
|
SIFIVE_SPI_DELAY0_SCKCS(1));
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_DELAY1,
|
|
SIFIVE_SPI_DELAY1_INTERCS(1) |
|
|
SIFIVE_SPI_DELAY1_INTERXFR(0));
|
|
|
|
/* Exit specialized memory-mapped SPI flash mode */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_FCTRL, 0);
|
|
}
|
|
|
|
static int
|
|
sifive_spi_prepare_message(struct spi_master *master, struct spi_message *msg)
|
|
{
|
|
struct sifive_spi *spi = spi_master_get_devdata(master);
|
|
struct spi_device *device = msg->spi;
|
|
|
|
/* Update the chip select polarity */
|
|
if (device->mode & SPI_CS_HIGH)
|
|
spi->cs_inactive &= ~BIT(device->chip_select);
|
|
else
|
|
spi->cs_inactive |= BIT(device->chip_select);
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, spi->cs_inactive);
|
|
|
|
/* Select the correct device */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_CSID, device->chip_select);
|
|
|
|
/* Set clock mode */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_SCKMODE,
|
|
device->mode & SIFIVE_SPI_SCKMODE_MODE_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sifive_spi_set_cs(struct spi_device *device, bool is_high)
|
|
{
|
|
struct sifive_spi *spi = spi_master_get_devdata(device->master);
|
|
|
|
/* Reverse polarity is handled by SCMR/CPOL. Not inverted CS. */
|
|
if (device->mode & SPI_CS_HIGH)
|
|
is_high = !is_high;
|
|
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_CSMODE, is_high ?
|
|
SIFIVE_SPI_CSMODE_MODE_AUTO :
|
|
SIFIVE_SPI_CSMODE_MODE_HOLD);
|
|
}
|
|
|
|
static int
|
|
sifive_spi_prep_transfer(struct sifive_spi *spi, struct spi_device *device,
|
|
struct spi_transfer *t)
|
|
{
|
|
u32 cr;
|
|
unsigned int mode;
|
|
|
|
/* Calculate and program the clock rate */
|
|
cr = DIV_ROUND_UP(clk_get_rate(spi->clk) >> 1, t->speed_hz) - 1;
|
|
cr &= SIFIVE_SPI_SCKDIV_DIV_MASK;
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_SCKDIV, cr);
|
|
|
|
mode = max_t(unsigned int, t->rx_nbits, t->tx_nbits);
|
|
|
|
/* Set frame format */
|
|
cr = SIFIVE_SPI_FMT_LEN(t->bits_per_word);
|
|
switch (mode) {
|
|
case SPI_NBITS_QUAD:
|
|
cr |= SIFIVE_SPI_FMT_PROTO_QUAD;
|
|
break;
|
|
case SPI_NBITS_DUAL:
|
|
cr |= SIFIVE_SPI_FMT_PROTO_DUAL;
|
|
break;
|
|
default:
|
|
cr |= SIFIVE_SPI_FMT_PROTO_SINGLE;
|
|
break;
|
|
}
|
|
if (device->mode & SPI_LSB_FIRST)
|
|
cr |= SIFIVE_SPI_FMT_ENDIAN;
|
|
if (!t->rx_buf)
|
|
cr |= SIFIVE_SPI_FMT_DIR;
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_FMT, cr);
|
|
|
|
/* We will want to poll if the time we need to wait is
|
|
* less than the context switching time.
|
|
* Let's call that threshold 5us. The operation will take:
|
|
* (8/mode) * fifo_depth / hz <= 5 * 10^-6
|
|
* 1600000 * fifo_depth <= hz * mode
|
|
*/
|
|
return 1600000 * spi->fifo_depth <= t->speed_hz * mode;
|
|
}
|
|
|
|
static irqreturn_t sifive_spi_irq(int irq, void *dev_id)
|
|
{
|
|
struct sifive_spi *spi = dev_id;
|
|
u32 ip = sifive_spi_read(spi, SIFIVE_SPI_REG_IP);
|
|
|
|
if (ip & (SIFIVE_SPI_IP_TXWM | SIFIVE_SPI_IP_RXWM)) {
|
|
/* Disable interrupts until next transfer */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
|
|
complete(&spi->done);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static void sifive_spi_wait(struct sifive_spi *spi, u32 bit, int poll)
|
|
{
|
|
if (poll) {
|
|
u32 cr;
|
|
|
|
do {
|
|
cr = sifive_spi_read(spi, SIFIVE_SPI_REG_IP);
|
|
} while (!(cr & bit));
|
|
} else {
|
|
reinit_completion(&spi->done);
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_IE, bit);
|
|
wait_for_completion(&spi->done);
|
|
}
|
|
}
|
|
|
|
static void sifive_spi_tx(struct sifive_spi *spi, const u8 *tx_ptr)
|
|
{
|
|
WARN_ON_ONCE((sifive_spi_read(spi, SIFIVE_SPI_REG_TXDATA)
|
|
& SIFIVE_SPI_TXDATA_FULL) != 0);
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_TXDATA,
|
|
*tx_ptr & SIFIVE_SPI_TXDATA_DATA_MASK);
|
|
}
|
|
|
|
static void sifive_spi_rx(struct sifive_spi *spi, u8 *rx_ptr)
|
|
{
|
|
u32 data = sifive_spi_read(spi, SIFIVE_SPI_REG_RXDATA);
|
|
|
|
WARN_ON_ONCE((data & SIFIVE_SPI_RXDATA_EMPTY) != 0);
|
|
*rx_ptr = data & SIFIVE_SPI_RXDATA_DATA_MASK;
|
|
}
|
|
|
|
static int
|
|
sifive_spi_transfer_one(struct spi_master *master, struct spi_device *device,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct sifive_spi *spi = spi_master_get_devdata(master);
|
|
int poll = sifive_spi_prep_transfer(spi, device, t);
|
|
const u8 *tx_ptr = t->tx_buf;
|
|
u8 *rx_ptr = t->rx_buf;
|
|
unsigned int remaining_words = t->len;
|
|
|
|
while (remaining_words) {
|
|
unsigned int n_words = min(remaining_words, spi->fifo_depth);
|
|
unsigned int i;
|
|
|
|
/* Enqueue n_words for transmission */
|
|
for (i = 0; i < n_words; i++)
|
|
sifive_spi_tx(spi, tx_ptr++);
|
|
|
|
if (rx_ptr) {
|
|
/* Wait for transmission + reception to complete */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_RXMARK,
|
|
n_words - 1);
|
|
sifive_spi_wait(spi, SIFIVE_SPI_IP_RXWM, poll);
|
|
|
|
/* Read out all the data from the RX FIFO */
|
|
for (i = 0; i < n_words; i++)
|
|
sifive_spi_rx(spi, rx_ptr++);
|
|
} else {
|
|
/* Wait for transmission to complete */
|
|
sifive_spi_wait(spi, SIFIVE_SPI_IP_TXWM, poll);
|
|
}
|
|
|
|
remaining_words -= n_words;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sifive_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct sifive_spi *spi;
|
|
int ret, irq, num_cs;
|
|
u32 cs_bits, max_bits_per_word;
|
|
struct spi_master *master;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(struct sifive_spi));
|
|
if (!master) {
|
|
dev_err(&pdev->dev, "out of memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spi = spi_master_get_devdata(master);
|
|
init_completion(&spi->done);
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
spi->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(spi->regs)) {
|
|
ret = PTR_ERR(spi->regs);
|
|
goto put_master;
|
|
}
|
|
|
|
spi->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(spi->clk)) {
|
|
dev_err(&pdev->dev, "Unable to find bus clock\n");
|
|
ret = PTR_ERR(spi->clk);
|
|
goto put_master;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto put_master;
|
|
}
|
|
|
|
/* Optional parameters */
|
|
ret =
|
|
of_property_read_u32(pdev->dev.of_node, "sifive,fifo-depth",
|
|
&spi->fifo_depth);
|
|
if (ret < 0)
|
|
spi->fifo_depth = SIFIVE_SPI_DEFAULT_DEPTH;
|
|
|
|
ret =
|
|
of_property_read_u32(pdev->dev.of_node, "sifive,max-bits-per-word",
|
|
&max_bits_per_word);
|
|
|
|
if (!ret && max_bits_per_word < 8) {
|
|
dev_err(&pdev->dev, "Only 8bit SPI words supported by the driver\n");
|
|
ret = -EINVAL;
|
|
goto put_master;
|
|
}
|
|
|
|
/* Spin up the bus clock before hitting registers */
|
|
ret = clk_prepare_enable(spi->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to enable bus clock\n");
|
|
goto put_master;
|
|
}
|
|
|
|
/* probe the number of CS lines */
|
|
spi->cs_inactive = sifive_spi_read(spi, SIFIVE_SPI_REG_CSDEF);
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, 0xffffffffU);
|
|
cs_bits = sifive_spi_read(spi, SIFIVE_SPI_REG_CSDEF);
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, spi->cs_inactive);
|
|
if (!cs_bits) {
|
|
dev_err(&pdev->dev, "Could not auto probe CS lines\n");
|
|
ret = -EINVAL;
|
|
goto put_master;
|
|
}
|
|
|
|
num_cs = ilog2(cs_bits) + 1;
|
|
if (num_cs > SIFIVE_SPI_MAX_CS) {
|
|
dev_err(&pdev->dev, "Invalid number of spi slaves\n");
|
|
ret = -EINVAL;
|
|
goto put_master;
|
|
}
|
|
|
|
/* Define our master */
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
master->bus_num = pdev->id;
|
|
master->num_chipselect = num_cs;
|
|
master->mode_bits = SPI_CPHA | SPI_CPOL
|
|
| SPI_CS_HIGH | SPI_LSB_FIRST
|
|
| SPI_TX_DUAL | SPI_TX_QUAD
|
|
| SPI_RX_DUAL | SPI_RX_QUAD;
|
|
/* TODO: add driver support for bits_per_word < 8
|
|
* we need to "left-align" the bits (unless SPI_LSB_FIRST)
|
|
*/
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8);
|
|
master->flags = SPI_CONTROLLER_MUST_TX | SPI_MASTER_GPIO_SS;
|
|
master->prepare_message = sifive_spi_prepare_message;
|
|
master->set_cs = sifive_spi_set_cs;
|
|
master->transfer_one = sifive_spi_transfer_one;
|
|
|
|
pdev->dev.dma_mask = NULL;
|
|
/* Configure the SPI master hardware */
|
|
sifive_spi_init(spi);
|
|
|
|
/* Register for SPI Interrupt */
|
|
ret = devm_request_irq(&pdev->dev, irq, sifive_spi_irq, 0,
|
|
dev_name(&pdev->dev), spi);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to bind to interrupt\n");
|
|
goto put_master;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "mapped; irq=%d, cs=%d\n",
|
|
irq, master->num_chipselect);
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, master);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "spi_register_master failed\n");
|
|
goto put_master;
|
|
}
|
|
|
|
return 0;
|
|
|
|
put_master:
|
|
spi_master_put(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sifive_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct sifive_spi *spi = spi_master_get_devdata(master);
|
|
|
|
/* Disable all the interrupts just in case */
|
|
sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sifive_spi_of_match[] = {
|
|
{ .compatible = "sifive,spi0", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sifive_spi_of_match);
|
|
|
|
static struct platform_driver sifive_spi_driver = {
|
|
.probe = sifive_spi_probe,
|
|
.remove = sifive_spi_remove,
|
|
.driver = {
|
|
.name = SIFIVE_SPI_DRIVER_NAME,
|
|
.of_match_table = sifive_spi_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(sifive_spi_driver);
|
|
|
|
MODULE_AUTHOR("SiFive, Inc. <sifive@sifive.com>");
|
|
MODULE_DESCRIPTION("SiFive SPI driver");
|
|
MODULE_LICENSE("GPL");
|