mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 11:50:52 +07:00
996d5d5f89
Setting the vibrator enable_mask is not implemented correctly:
For regmap_update_bits(map, reg, mask, val) we give in either
regs->enable_mask or 0 (= no-op) as mask and "val" as value.
But "val" actually refers to the vibrator voltage control register,
which has nothing to do with the enable_mask.
So we usually end up doing nothing when we really wanted
to enable the vibrator.
We want to set or clear the enable_mask (to enable/disable the vibrator).
Therefore, change the call to always modify the enable_mask
and set the bits only if we want to enable the vibrator.
Fixes: d4c7c5c96c ("Input: pm8xxx-vib - handle separate enable register")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
263 lines
6.1 KiB
C
263 lines
6.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/input.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define VIB_MAX_LEVEL_mV (3100)
|
|
#define VIB_MIN_LEVEL_mV (1200)
|
|
#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
|
|
|
|
#define MAX_FF_SPEED 0xff
|
|
|
|
struct pm8xxx_regs {
|
|
unsigned int enable_addr;
|
|
unsigned int enable_mask;
|
|
|
|
unsigned int drv_addr;
|
|
unsigned int drv_mask;
|
|
unsigned int drv_shift;
|
|
unsigned int drv_en_manual_mask;
|
|
};
|
|
|
|
static const struct pm8xxx_regs pm8058_regs = {
|
|
.drv_addr = 0x4A,
|
|
.drv_mask = 0xf8,
|
|
.drv_shift = 3,
|
|
.drv_en_manual_mask = 0xfc,
|
|
};
|
|
|
|
static struct pm8xxx_regs pm8916_regs = {
|
|
.enable_addr = 0xc046,
|
|
.enable_mask = BIT(7),
|
|
.drv_addr = 0xc041,
|
|
.drv_mask = 0x1F,
|
|
.drv_shift = 0,
|
|
.drv_en_manual_mask = 0,
|
|
};
|
|
|
|
/**
|
|
* struct pm8xxx_vib - structure to hold vibrator data
|
|
* @vib_input_dev: input device supporting force feedback
|
|
* @work: work structure to set the vibration parameters
|
|
* @regmap: regmap for register read/write
|
|
* @regs: registers' info
|
|
* @speed: speed of vibration set from userland
|
|
* @active: state of vibrator
|
|
* @level: level of vibration to set in the chip
|
|
* @reg_vib_drv: regs->drv_addr register value
|
|
*/
|
|
struct pm8xxx_vib {
|
|
struct input_dev *vib_input_dev;
|
|
struct work_struct work;
|
|
struct regmap *regmap;
|
|
const struct pm8xxx_regs *regs;
|
|
int speed;
|
|
int level;
|
|
bool active;
|
|
u8 reg_vib_drv;
|
|
};
|
|
|
|
/**
|
|
* pm8xxx_vib_set - handler to start/stop vibration
|
|
* @vib: pointer to vibrator structure
|
|
* @on: state to set
|
|
*/
|
|
static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
|
|
{
|
|
int rc;
|
|
unsigned int val = vib->reg_vib_drv;
|
|
const struct pm8xxx_regs *regs = vib->regs;
|
|
|
|
if (on)
|
|
val |= (vib->level << regs->drv_shift) & regs->drv_mask;
|
|
else
|
|
val &= ~regs->drv_mask;
|
|
|
|
rc = regmap_write(vib->regmap, regs->drv_addr, val);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
vib->reg_vib_drv = val;
|
|
|
|
if (regs->enable_mask)
|
|
rc = regmap_update_bits(vib->regmap, regs->enable_addr,
|
|
regs->enable_mask, on ? ~0 : 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* pm8xxx_work_handler - worker to set vibration level
|
|
* @work: pointer to work_struct
|
|
*/
|
|
static void pm8xxx_work_handler(struct work_struct *work)
|
|
{
|
|
struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
|
|
const struct pm8xxx_regs *regs = vib->regs;
|
|
int rc;
|
|
unsigned int val;
|
|
|
|
rc = regmap_read(vib->regmap, regs->drv_addr, &val);
|
|
if (rc < 0)
|
|
return;
|
|
|
|
/*
|
|
* pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
|
|
* scale the level to fit into these ranges.
|
|
*/
|
|
if (vib->speed) {
|
|
vib->active = true;
|
|
vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
|
|
VIB_MIN_LEVEL_mV;
|
|
vib->level /= 100;
|
|
} else {
|
|
vib->active = false;
|
|
vib->level = VIB_MIN_LEVEL_mV / 100;
|
|
}
|
|
|
|
pm8xxx_vib_set(vib, vib->active);
|
|
}
|
|
|
|
/**
|
|
* pm8xxx_vib_close - callback of input close callback
|
|
* @dev: input device pointer
|
|
*
|
|
* Turns off the vibrator.
|
|
*/
|
|
static void pm8xxx_vib_close(struct input_dev *dev)
|
|
{
|
|
struct pm8xxx_vib *vib = input_get_drvdata(dev);
|
|
|
|
cancel_work_sync(&vib->work);
|
|
if (vib->active)
|
|
pm8xxx_vib_set(vib, false);
|
|
}
|
|
|
|
/**
|
|
* pm8xxx_vib_play_effect - function to handle vib effects.
|
|
* @dev: input device pointer
|
|
* @data: data of effect
|
|
* @effect: effect to play
|
|
*
|
|
* Currently this driver supports only rumble effects.
|
|
*/
|
|
static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data,
|
|
struct ff_effect *effect)
|
|
{
|
|
struct pm8xxx_vib *vib = input_get_drvdata(dev);
|
|
|
|
vib->speed = effect->u.rumble.strong_magnitude >> 8;
|
|
if (!vib->speed)
|
|
vib->speed = effect->u.rumble.weak_magnitude >> 9;
|
|
|
|
schedule_work(&vib->work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_vib_probe(struct platform_device *pdev)
|
|
{
|
|
struct pm8xxx_vib *vib;
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
unsigned int val;
|
|
const struct pm8xxx_regs *regs;
|
|
|
|
vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL);
|
|
if (!vib)
|
|
return -ENOMEM;
|
|
|
|
vib->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!vib->regmap)
|
|
return -ENODEV;
|
|
|
|
input_dev = devm_input_allocate_device(&pdev->dev);
|
|
if (!input_dev)
|
|
return -ENOMEM;
|
|
|
|
INIT_WORK(&vib->work, pm8xxx_work_handler);
|
|
vib->vib_input_dev = input_dev;
|
|
|
|
regs = of_device_get_match_data(&pdev->dev);
|
|
|
|
/* operate in manual mode */
|
|
error = regmap_read(vib->regmap, regs->drv_addr, &val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
val &= regs->drv_en_manual_mask;
|
|
error = regmap_write(vib->regmap, regs->drv_addr, val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
vib->regs = regs;
|
|
vib->reg_vib_drv = val;
|
|
|
|
input_dev->name = "pm8xxx_vib_ffmemless";
|
|
input_dev->id.version = 1;
|
|
input_dev->close = pm8xxx_vib_close;
|
|
input_set_drvdata(input_dev, vib);
|
|
input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);
|
|
|
|
error = input_ff_create_memless(input_dev, NULL,
|
|
pm8xxx_vib_play_effect);
|
|
if (error) {
|
|
dev_err(&pdev->dev,
|
|
"couldn't register vibrator as FF device\n");
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(input_dev);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "couldn't register input device\n");
|
|
return error;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, vib);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused pm8xxx_vib_suspend(struct device *dev)
|
|
{
|
|
struct pm8xxx_vib *vib = dev_get_drvdata(dev);
|
|
|
|
/* Turn off the vibrator */
|
|
pm8xxx_vib_set(vib, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
|
|
|
|
static const struct of_device_id pm8xxx_vib_id_table[] = {
|
|
{ .compatible = "qcom,pm8058-vib", .data = &pm8058_regs },
|
|
{ .compatible = "qcom,pm8921-vib", .data = &pm8058_regs },
|
|
{ .compatible = "qcom,pm8916-vib", .data = &pm8916_regs },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
|
|
|
|
static struct platform_driver pm8xxx_vib_driver = {
|
|
.probe = pm8xxx_vib_probe,
|
|
.driver = {
|
|
.name = "pm8xxx-vib",
|
|
.pm = &pm8xxx_vib_pm_ops,
|
|
.of_match_table = pm8xxx_vib_id_table,
|
|
},
|
|
};
|
|
module_platform_driver(pm8xxx_vib_driver);
|
|
|
|
MODULE_ALIAS("platform:pm8xxx_vib");
|
|
MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Amy Maloche <amaloche@codeaurora.org>");
|