mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 08:27:48 +07:00
bd9c1b6005
The .config() calls clk_get_rate() which might sleep, so we need to set pwm_chip can_sleep flag. Otherwise, we see the following warning when using PWM driven heartbeat led. WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:856 mutex_trylock+0x184/0x1a4() DEBUG_LOCKS_WARN_ON(in_interrupt()) Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.0-rc5 #18 [<c0015420>] (unwind_backtrace) from [<c0012cb0>] (show_stack+0x10/0x14) [<c0012cb0>] (show_stack) from [<c001daf8>] (warn_slowpath_common+0x6c/0x8c) [<c001daf8>] (warn_slowpath_common) from [<c001dbac>] (warn_slowpath_fmt+0x30/0x40) [<c001dbac>] (warn_slowpath_fmt) from [<c045df74>] (mutex_trylock+0x184/0x1a4) [<c045df74>] (mutex_trylock) from [<c0360950>] (clk_prepare_lock+0xc/0xec) [<c0360950>] (clk_prepare_lock) from [<c0362020>] (clk_get_rate+0xc/0x68) [<c0362020>] (clk_get_rate) from [<c028d07c>] (mxs_pwm_config+0x20/0x198) [<c028d07c>] (mxs_pwm_config) from [<c028bde8>] (pwm_config+0x60/0x70) [<c028bde8>] (pwm_config) from [<c034b61c>] (__led_pwm_set+0x1c/0x3c) [<c034b61c>] (__led_pwm_set) from [<c034bc3c>] (led_heartbeat_function+0x70/0x110) [<c034bc3c>] (led_heartbeat_function) from [<c00292f0>] (call_timer_fn+0x7c/0x164) [<c00292f0>] (call_timer_fn) from [<c00295c8>] (run_timer_softirq+0x1f0/0x260) [<c00295c8>] (run_timer_softirq) from [<c002255c>] (__do_softirq+0xc4/0x2f0) [<c002255c>] (__do_softirq) from [<c0022890>] (irq_exit+0xa4/0x10c) [<c0022890>] (irq_exit) from [<c0010240>] (handle_IRQ+0x34/0x84) [<c0010240>] (handle_IRQ) from [<c0013524>] (__irq_svc+0x44/0x54) [<c0013524>] (__irq_svc) from [<c00107f8>] (arch_cpu_idle+0x40/0x48) [<c00107f8>] (arch_cpu_idle) from [<c005deb8>] (cpu_startup_entry+0x70/0x198) [<c005deb8>] (cpu_startup_entry) from [<c060aac8>] (start_kernel+0x2a8/0x2f8) Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
204 lines
4.7 KiB
C
204 lines
4.7 KiB
C
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stmp_device.h>
|
|
|
|
#define SET 0x4
|
|
#define CLR 0x8
|
|
#define TOG 0xc
|
|
|
|
#define PWM_CTRL 0x0
|
|
#define PWM_ACTIVE0 0x10
|
|
#define PWM_PERIOD0 0x20
|
|
#define PERIOD_PERIOD(p) ((p) & 0xffff)
|
|
#define PERIOD_PERIOD_MAX 0x10000
|
|
#define PERIOD_ACTIVE_HIGH (3 << 16)
|
|
#define PERIOD_INACTIVE_LOW (2 << 18)
|
|
#define PERIOD_CDIV(div) (((div) & 0x7) << 20)
|
|
#define PERIOD_CDIV_MAX 8
|
|
|
|
struct mxs_pwm_chip {
|
|
struct pwm_chip chip;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
};
|
|
|
|
#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)
|
|
|
|
static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
|
|
int ret, div = 0;
|
|
unsigned int period_cycles, duty_cycles;
|
|
unsigned long rate;
|
|
unsigned long long c;
|
|
|
|
rate = clk_get_rate(mxs->clk);
|
|
while (1) {
|
|
c = rate / (1 << div);
|
|
c = c * period_ns;
|
|
do_div(c, 1000000000);
|
|
if (c < PERIOD_PERIOD_MAX)
|
|
break;
|
|
div++;
|
|
if (div > PERIOD_CDIV_MAX)
|
|
return -EINVAL;
|
|
}
|
|
|
|
period_cycles = c;
|
|
c *= duty_ns;
|
|
do_div(c, period_ns);
|
|
duty_cycles = c;
|
|
|
|
/*
|
|
* If the PWM channel is disabled, make sure to turn on the clock
|
|
* before writing the register. Otherwise, keep it enabled.
|
|
*/
|
|
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
|
|
ret = clk_prepare_enable(mxs->clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
writel(duty_cycles << 16,
|
|
mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
|
|
writel(PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH |
|
|
PERIOD_INACTIVE_LOW | PERIOD_CDIV(div),
|
|
mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
|
|
|
|
/*
|
|
* If the PWM is not enabled, turn the clock off again to save power.
|
|
*/
|
|
if (!test_bit(PWMF_ENABLED, &pwm->flags))
|
|
clk_disable_unprepare(mxs->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(mxs->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxs_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
|
|
|
|
writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
|
|
|
|
clk_disable_unprepare(mxs->clk);
|
|
}
|
|
|
|
static const struct pwm_ops mxs_pwm_ops = {
|
|
.config = mxs_pwm_config,
|
|
.enable = mxs_pwm_enable,
|
|
.disable = mxs_pwm_disable,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int mxs_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct mxs_pwm_chip *mxs;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
|
|
if (!mxs)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
mxs->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(mxs->base))
|
|
return PTR_ERR(mxs->base);
|
|
|
|
mxs->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(mxs->clk))
|
|
return PTR_ERR(mxs->clk);
|
|
|
|
mxs->chip.dev = &pdev->dev;
|
|
mxs->chip.ops = &mxs_pwm_ops;
|
|
mxs->chip.base = -1;
|
|
mxs->chip.can_sleep = true;
|
|
ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = pwmchip_add(&mxs->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mxs);
|
|
|
|
ret = stmp_reset_block(mxs->base);
|
|
if (ret)
|
|
goto pwm_remove;
|
|
|
|
return 0;
|
|
|
|
pwm_remove:
|
|
pwmchip_remove(&mxs->chip);
|
|
return ret;
|
|
}
|
|
|
|
static int mxs_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev);
|
|
|
|
return pwmchip_remove(&mxs->chip);
|
|
}
|
|
|
|
static const struct of_device_id mxs_pwm_dt_ids[] = {
|
|
{ .compatible = "fsl,imx23-pwm", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);
|
|
|
|
static struct platform_driver mxs_pwm_driver = {
|
|
.driver = {
|
|
.name = "mxs-pwm",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = mxs_pwm_dt_ids,
|
|
},
|
|
.probe = mxs_pwm_probe,
|
|
.remove = mxs_pwm_remove,
|
|
};
|
|
module_platform_driver(mxs_pwm_driver);
|
|
|
|
MODULE_ALIAS("platform:mxs-pwm");
|
|
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
|
|
MODULE_DESCRIPTION("Freescale MXS PWM Driver");
|
|
MODULE_LICENSE("GPL v2");
|