mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-19 19:56:45 +07:00
8bd26e3a7e
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings. In any case, they are temporary and harmless.
This removes all the ARM uses of the __cpuinit macros from C code,
and all __CPUINIT from assembly code. It also had two ".previous"
section statements that were paired off against __CPUINIT
(aka .section ".cpuinit.text") that also get removed here.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
152 lines
3.9 KiB
ArmAsm
152 lines
3.9 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/arm740.S: utility functions for ARM740
|
|
*
|
|
* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
.text
|
|
/*
|
|
* cpu_arm740_proc_init()
|
|
* cpu_arm740_do_idle()
|
|
* cpu_arm740_dcache_clean_area()
|
|
* cpu_arm740_switch_mm()
|
|
*
|
|
* These are not required.
|
|
*/
|
|
ENTRY(cpu_arm740_proc_init)
|
|
ENTRY(cpu_arm740_do_idle)
|
|
ENTRY(cpu_arm740_dcache_clean_area)
|
|
ENTRY(cpu_arm740_switch_mm)
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_arm740_proc_fin()
|
|
*/
|
|
ENTRY(cpu_arm740_proc_fin)
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x3f000000 @ bank/f/lock/s
|
|
bic r0, r0, #0x0000000c @ w-buffer/cache
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_arm740_reset(loc)
|
|
* Params : r0 = address to jump to
|
|
* Notes : This sets up everything for a reset
|
|
*/
|
|
.pushsection .idmap.text, "ax"
|
|
ENTRY(cpu_arm740_reset)
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
|
|
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
|
|
bic ip, ip, #0x0000000c @ ............wc..
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
mov pc, r0
|
|
ENDPROC(cpu_arm740_reset)
|
|
.popsection
|
|
|
|
.type __arm740_setup, #function
|
|
__arm740_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate caches
|
|
|
|
mcr p15, 0, r0, c6, c3 @ disable area 3~7
|
|
mcr p15, 0, r0, c6, c4
|
|
mcr p15, 0, r0, c6, c5
|
|
mcr p15, 0, r0, c6, c6
|
|
mcr p15, 0, r0, c6, c7
|
|
|
|
mov r0, #0x0000003F @ base = 0, size = 4GB
|
|
mcr p15, 0, r0, c6, c0 @ set area 0, default
|
|
|
|
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
|
|
ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
|
|
mov r4, #10 @ 11 is the minimum (4KB)
|
|
1: add r4, r4, #1 @ area size *= 2
|
|
movs r3, r3, lsr #1
|
|
bne 1b @ count not zero r-shift
|
|
orr r0, r0, r4, lsl #1 @ the area register value
|
|
orr r0, r0, #1 @ set enable bit
|
|
mcr p15, 0, r0, c6, c1 @ set area 1, RAM
|
|
|
|
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
|
|
ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
|
|
cmp r3, #0
|
|
moveq r0, #0
|
|
beq 2f
|
|
mov r4, #10 @ 11 is the minimum (4KB)
|
|
1: add r4, r4, #1 @ area size *= 2
|
|
movs r3, r3, lsr #1
|
|
bne 1b @ count not zero r-shift
|
|
orr r0, r0, r4, lsl #1 @ the area register value
|
|
orr r0, r0, #1 @ set enable bit
|
|
2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
|
|
|
|
mov r0, #0x06
|
|
mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mov r0, #0x00 @ disable whole write buffer
|
|
#else
|
|
mov r0, #0x02 @ Region 1 write bufferred
|
|
#endif
|
|
mcr p15, 0, r0, c3, c0
|
|
|
|
mov r0, #0x10000
|
|
sub r0, r0, #1 @ r0 = 0xffff
|
|
mcr p15, 0, r0, c5, c0 @ all read/write access
|
|
|
|
mrc p15, 0, r0, c1, c0 @ get control register
|
|
bic r0, r0, #0x3F000000 @ set to standard caching mode
|
|
@ need some benchmark
|
|
orr r0, r0, #0x0000000d @ MPU/Cache/WB
|
|
|
|
mov pc, lr
|
|
|
|
.size __arm740_setup, . - __arm740_setup
|
|
|
|
__INITDATA
|
|
|
|
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
|
|
define_processor_functions arm740, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1
|
|
|
|
.section ".rodata"
|
|
|
|
string cpu_arch_name, "armv4"
|
|
string cpu_elf_name, "v4"
|
|
string cpu_arm740_name, "ARM740T"
|
|
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
.type __arm740_proc_info,#object
|
|
__arm740_proc_info:
|
|
.long 0x41807400
|
|
.long 0xfffffff0
|
|
.long 0
|
|
.long 0
|
|
b __arm740_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT
|
|
.long cpu_arm740_name
|
|
.long arm740_processor_functions
|
|
.long 0
|
|
.long 0
|
|
.long v4_cache_fns @ cache model
|
|
.size __arm740_proc_info, . - __arm740_proc_info
|