mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 04:46:51 +07:00
1e5a0a9a58
We're currently using a fixed frequency clock specified in the DT, so enabling is a no-op. However, the RPi firmware-based clocks driver can actually disable unused clocks, so when switching to use it we ended up losing our MMC clock once all devices were probed. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
213 lines
6.0 KiB
C
213 lines
6.0 KiB
C
/*
|
|
* BCM2835 SDHCI
|
|
* Copyright (C) 2012 Stephen Warren
|
|
* Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me
|
|
* Portions of the code there were obviously based on the Linux kernel at:
|
|
* git://github.com/raspberrypi/linux.git rpi-3.6.y
|
|
* commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mmc/host.h>
|
|
#include "sdhci-pltfm.h"
|
|
|
|
/*
|
|
* 400KHz is max freq for card ID etc. Use that as min card clock. We need to
|
|
* know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY.
|
|
*/
|
|
#define MIN_FREQ 400000
|
|
|
|
/*
|
|
* The Arasan has a bugette whereby it may lose the content of successive
|
|
* writes to registers that are within two SD-card clock cycles of each other
|
|
* (a clock domain crossing problem). It seems, however, that the data
|
|
* register does not have this problem, which is just as well - otherwise we'd
|
|
* have to nobble the DMA engine too.
|
|
*
|
|
* This should probably be dynamically calculated based on the actual card
|
|
* frequency. However, this is the longest we'll have to wait, and doesn't
|
|
* seem to slow access down too much, so the added complexity doesn't seem
|
|
* worth it for now.
|
|
*
|
|
* 1/MIN_FREQ is (max) time per tick of eMMC clock.
|
|
* 2/MIN_FREQ is time for two ticks.
|
|
* Multiply by 1000000 to get uS per two ticks.
|
|
* *1000000 for uSecs.
|
|
* +1 for hack rounding.
|
|
*/
|
|
#define BCM2835_SDHCI_WRITE_DELAY (((2 * 1000000) / MIN_FREQ) + 1)
|
|
|
|
struct bcm2835_sdhci {
|
|
u32 shadow;
|
|
};
|
|
|
|
static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
writel(val, host->ioaddr + reg);
|
|
|
|
udelay(BCM2835_SDHCI_WRITE_DELAY);
|
|
}
|
|
|
|
static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
if (reg == SDHCI_CAPABILITIES)
|
|
val |= SDHCI_CAN_VDD_330;
|
|
|
|
return val;
|
|
}
|
|
|
|
static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv;
|
|
u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow :
|
|
bcm2835_sdhci_readl(host, reg & ~3);
|
|
u32 word_num = (reg >> 1) & 1;
|
|
u32 word_shift = word_num * 16;
|
|
u32 mask = 0xffff << word_shift;
|
|
u32 newval = (oldval & ~mask) | (val << word_shift);
|
|
|
|
if (reg == SDHCI_TRANSFER_MODE)
|
|
bcm2835_host->shadow = newval;
|
|
else
|
|
bcm2835_sdhci_writel(host, newval, reg & ~3);
|
|
}
|
|
|
|
static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
|
|
u32 word_num = (reg >> 1) & 1;
|
|
u32 word_shift = word_num * 16;
|
|
u32 word = (val >> word_shift) & 0xffff;
|
|
|
|
return word;
|
|
}
|
|
|
|
static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
u32 oldval = bcm2835_sdhci_readl(host, reg & ~3);
|
|
u32 byte_num = reg & 3;
|
|
u32 byte_shift = byte_num * 8;
|
|
u32 mask = 0xff << byte_shift;
|
|
u32 newval = (oldval & ~mask) | (val << byte_shift);
|
|
|
|
bcm2835_sdhci_writel(host, newval, reg & ~3);
|
|
}
|
|
|
|
static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
|
|
u32 byte_num = reg & 3;
|
|
u32 byte_shift = byte_num * 8;
|
|
u32 byte = (val >> byte_shift) & 0xff;
|
|
|
|
return byte;
|
|
}
|
|
|
|
static unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
return MIN_FREQ;
|
|
}
|
|
|
|
static const struct sdhci_ops bcm2835_sdhci_ops = {
|
|
.write_l = bcm2835_sdhci_writel,
|
|
.write_w = bcm2835_sdhci_writew,
|
|
.write_b = bcm2835_sdhci_writeb,
|
|
.read_l = bcm2835_sdhci_readl,
|
|
.read_w = bcm2835_sdhci_readw,
|
|
.read_b = bcm2835_sdhci_readb,
|
|
.set_clock = sdhci_set_clock,
|
|
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
|
|
.get_min_clock = bcm2835_sdhci_get_min_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data bcm2835_sdhci_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
|
|
.ops = &bcm2835_sdhci_ops,
|
|
};
|
|
|
|
static int bcm2835_sdhci_probe(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host;
|
|
struct bcm2835_sdhci *bcm2835_host;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
int ret;
|
|
|
|
host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata, 0);
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host),
|
|
GFP_KERNEL);
|
|
if (!bcm2835_host) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"failed to allocate bcm2835_sdhci\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
pltfm_host->priv = bcm2835_host;
|
|
|
|
pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(pltfm_host->clk)) {
|
|
ret = PTR_ERR(pltfm_host->clk);
|
|
goto err;
|
|
}
|
|
ret = clk_prepare_enable(pltfm_host->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable host clk\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
return 0;
|
|
err_clk:
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
err:
|
|
sdhci_pltfm_free(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id bcm2835_sdhci_of_match[] = {
|
|
{ .compatible = "brcm,bcm2835-sdhci" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match);
|
|
|
|
static struct platform_driver bcm2835_sdhci_driver = {
|
|
.driver = {
|
|
.name = "sdhci-bcm2835",
|
|
.of_match_table = bcm2835_sdhci_of_match,
|
|
.pm = SDHCI_PLTFM_PMOPS,
|
|
},
|
|
.probe = bcm2835_sdhci_probe,
|
|
.remove = sdhci_pltfm_unregister,
|
|
};
|
|
module_platform_driver(bcm2835_sdhci_driver);
|
|
|
|
MODULE_DESCRIPTION("BCM2835 SDHCI driver");
|
|
MODULE_AUTHOR("Stephen Warren");
|
|
MODULE_LICENSE("GPL v2");
|