mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-13 19:06:43 +07:00
0d626239ff
The recent irq cleanups for arch/arm/mach-integrator/time.c and drivers/char/mwave/tp3780i.c changed the request_irq() dev_id parameter, but neglected to change the matching free_irq() parameter, thus creating a bug upon irq de-registration. Given that the impetus for the changes is not yet accepted upstream, it is best to revert the irq cleanups. Mostly. A comment is added to time.c to reduce future confusion, of type that led to my time.c cleanup in the first place. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> |
||
---|---|---|
.. | ||
3780i.c | ||
3780i.h | ||
Makefile | ||
mwavedd.c | ||
mwavedd.h | ||
mwavepub.h | ||
README | ||
smapi.c | ||
smapi.h | ||
tp3780i.c | ||
tp3780i.h |
Module options -------------- The mwave module takes the following options. Note that these options are not saved by the BIOS and so do not persist after unload and reload. mwave_debug=value, where value is bitwise OR of trace flags: 0x0001 mwavedd api tracing 0x0002 smapi api tracing 0x0004 3780i tracing 0x0008 tp3780i tracing Tracing only occurs if the driver has been compiled with the MW_TRACE macro #defined (i.e. let EXTRA_CFLAGS += -DMW_TRACE in the Makefile). mwave_3780i_irq=5/7/10/11/15 If the dsp irq has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the irq used by the dsp to be configured. mwave_3780i_io=0x130/0x350/0x0070/0xDB0 If the dsp io range has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the io range used by the dsp to be configured. mwave_uart_irq=3/4 If the mwave's uart irq has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the irq used by the mwave uart to be configured. mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8 If the uart io range has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the io range used by the mwave uart to be configured. Example to enable the 3780i DSP using ttyS1 resources: insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8 Accessing the driver -------------------- You must also create a node for the driver: mkdir -p /dev/modems mknod --mode=660 /dev/modems/mwave c 10 219