mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
8808b64daa
According to the manual, if a port is set for level detection using the corresponding bit in the edge/level select register and an external level interrupt signal is asserted, the corresponding bit in INTDT does not use the FF to hold the input. Thus, writing 1 to the corresponding bits in INTCLR cannot clear the corresponding bits in the INTDT register. Instead, when an external input signal is stopped, the corresponding bit in INTDT is cleared automatically. Since the INTDT bit cannot be cleared for the level interrupts until the interrupt signal is stopped, we end up with the infinite loop when using deferred (threaded) IRQ handling. Since a deferred interrupt is disabled by the low-level handler and re-enabled only when the deferred handler is completed, Fix the issue by dropping disabled interrupts from the pending mask as suggested by Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes in V2: * Drop disabled interrupts from pending mask altogether instead of dropping level interrupts one by one once they get handled. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
464 lines
12 KiB
C
464 lines
12 KiB
C
/*
|
|
* Renesas R-Car GPIO Support
|
|
*
|
|
* Copyright (C) 2013 Magnus Damm
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_data/gpio-rcar.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
|
|
struct gpio_rcar_priv {
|
|
void __iomem *base;
|
|
spinlock_t lock;
|
|
struct gpio_rcar_config config;
|
|
struct platform_device *pdev;
|
|
struct gpio_chip gpio_chip;
|
|
struct irq_chip irq_chip;
|
|
struct irq_domain *irq_domain;
|
|
};
|
|
|
|
#define IOINTSEL 0x00
|
|
#define INOUTSEL 0x04
|
|
#define OUTDT 0x08
|
|
#define INDT 0x0c
|
|
#define INTDT 0x10
|
|
#define INTCLR 0x14
|
|
#define INTMSK 0x18
|
|
#define MSKCLR 0x1c
|
|
#define POSNEG 0x20
|
|
#define EDGLEVEL 0x24
|
|
#define FILONOFF 0x28
|
|
#define BOTHEDGE 0x4c
|
|
|
|
#define RCAR_MAX_GPIO_PER_BANK 32
|
|
|
|
static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
|
|
{
|
|
return ioread32(p->base + offs);
|
|
}
|
|
|
|
static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
|
|
u32 value)
|
|
{
|
|
iowrite32(value, p->base + offs);
|
|
}
|
|
|
|
static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
|
|
int bit, bool value)
|
|
{
|
|
u32 tmp = gpio_rcar_read(p, offs);
|
|
|
|
if (value)
|
|
tmp |= BIT(bit);
|
|
else
|
|
tmp &= ~BIT(bit);
|
|
|
|
gpio_rcar_write(p, offs, tmp);
|
|
}
|
|
|
|
static void gpio_rcar_irq_disable(struct irq_data *d)
|
|
{
|
|
struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
|
|
|
|
gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
|
|
}
|
|
|
|
static void gpio_rcar_irq_enable(struct irq_data *d)
|
|
{
|
|
struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
|
|
|
|
gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
|
|
}
|
|
|
|
static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
|
|
unsigned int hwirq,
|
|
bool active_high_rising_edge,
|
|
bool level_trigger,
|
|
bool both)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* follow steps in the GPIO documentation for
|
|
* "Setting Edge-Sensitive Interrupt Input Mode" and
|
|
* "Setting Level-Sensitive Interrupt Input Mode"
|
|
*/
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
|
|
/* Configure postive or negative logic in POSNEG */
|
|
gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
|
|
|
|
/* Configure edge or level trigger in EDGLEVEL */
|
|
gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
|
|
|
|
/* Select one edge or both edges in BOTHEDGE */
|
|
if (p->config.has_both_edge_trigger)
|
|
gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
|
|
|
|
/* Select "Interrupt Input Mode" in IOINTSEL */
|
|
gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
|
|
|
|
/* Write INTCLR in case of edge trigger */
|
|
if (!level_trigger)
|
|
gpio_rcar_write(p, INTCLR, BIT(hwirq));
|
|
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
}
|
|
|
|
static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d);
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
|
|
|
dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type);
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
|
|
false);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
|
|
false);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
|
|
false);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
|
|
false);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
if (!p->config.has_both_edge_trigger)
|
|
return -EINVAL;
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
|
|
true);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct gpio_rcar_priv *p = dev_id;
|
|
u32 pending;
|
|
unsigned int offset, irqs_handled = 0;
|
|
|
|
while ((pending = gpio_rcar_read(p, INTDT) &
|
|
gpio_rcar_read(p, INTMSK))) {
|
|
offset = __ffs(pending);
|
|
gpio_rcar_write(p, INTCLR, BIT(offset));
|
|
generic_handle_irq(irq_find_mapping(p->irq_domain, offset));
|
|
irqs_handled++;
|
|
}
|
|
|
|
return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static inline struct gpio_rcar_priv *gpio_to_priv(struct gpio_chip *chip)
|
|
{
|
|
return container_of(chip, struct gpio_rcar_priv, gpio_chip);
|
|
}
|
|
|
|
static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
|
|
unsigned int gpio,
|
|
bool output)
|
|
{
|
|
struct gpio_rcar_priv *p = gpio_to_priv(chip);
|
|
unsigned long flags;
|
|
|
|
/* follow steps in the GPIO documentation for
|
|
* "Setting General Output Mode" and
|
|
* "Setting General Input Mode"
|
|
*/
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
|
|
/* Configure postive logic in POSNEG */
|
|
gpio_rcar_modify_bit(p, POSNEG, gpio, false);
|
|
|
|
/* Select "General Input/Output Mode" in IOINTSEL */
|
|
gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
|
|
|
|
/* Select Input Mode or Output Mode in INOUTSEL */
|
|
gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
|
|
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
}
|
|
|
|
static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return pinctrl_request_gpio(chip->base + offset);
|
|
}
|
|
|
|
static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
pinctrl_free_gpio(chip->base + offset);
|
|
|
|
/* Set the GPIO as an input to ensure that the next GPIO request won't
|
|
* drive the GPIO pin as an output.
|
|
*/
|
|
gpio_rcar_config_general_input_output_mode(chip, offset, false);
|
|
}
|
|
|
|
static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
gpio_rcar_config_general_input_output_mode(chip, offset, false);
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
u32 bit = BIT(offset);
|
|
|
|
/* testing on r8a7790 shows that INDT does not show correct pin state
|
|
* when configured as output, so use OUTDT in case of output pins */
|
|
if (gpio_rcar_read(gpio_to_priv(chip), INOUTSEL) & bit)
|
|
return (int)(gpio_rcar_read(gpio_to_priv(chip), OUTDT) & bit);
|
|
else
|
|
return (int)(gpio_rcar_read(gpio_to_priv(chip), INDT) & bit);
|
|
}
|
|
|
|
static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct gpio_rcar_priv *p = gpio_to_priv(chip);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
gpio_rcar_modify_bit(p, OUTDT, offset, value);
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
}
|
|
|
|
static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
/* write GPIO value to output before selecting output mode of pin */
|
|
gpio_rcar_set(chip, offset, value);
|
|
gpio_rcar_config_general_input_output_mode(chip, offset, true);
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
|
|
}
|
|
|
|
static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct gpio_rcar_priv *p = h->host_data;
|
|
|
|
dev_dbg(&p->pdev->dev, "map hw irq = %d, irq = %d\n", (int)hwirq, irq);
|
|
|
|
irq_set_chip_data(irq, h->host_data);
|
|
irq_set_chip_and_handler(irq, &p->irq_chip, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID); /* kill me now */
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops gpio_rcar_irq_domain_ops = {
|
|
.map = gpio_rcar_irq_domain_map,
|
|
};
|
|
|
|
static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
|
|
{
|
|
struct gpio_rcar_config *pdata = dev_get_platdata(&p->pdev->dev);
|
|
struct device_node *np = p->pdev->dev.of_node;
|
|
struct of_phandle_args args;
|
|
int ret;
|
|
|
|
if (pdata) {
|
|
p->config = *pdata;
|
|
} else if (IS_ENABLED(CONFIG_OF) && np) {
|
|
ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0,
|
|
&args);
|
|
p->config.number_of_pins = ret == 0 ? args.args[2]
|
|
: RCAR_MAX_GPIO_PER_BANK;
|
|
p->config.gpio_base = -1;
|
|
}
|
|
|
|
if (p->config.number_of_pins == 0 ||
|
|
p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) {
|
|
dev_warn(&p->pdev->dev,
|
|
"Invalid number of gpio lines %u, using %u\n",
|
|
p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK);
|
|
p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK;
|
|
}
|
|
}
|
|
|
|
static int gpio_rcar_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpio_rcar_priv *p;
|
|
struct resource *io, *irq;
|
|
struct gpio_chip *gpio_chip;
|
|
struct irq_chip *irq_chip;
|
|
const char *name = dev_name(&pdev->dev);
|
|
int ret;
|
|
|
|
p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
|
|
if (!p) {
|
|
dev_err(&pdev->dev, "failed to allocate driver data\n");
|
|
ret = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
p->pdev = pdev;
|
|
spin_lock_init(&p->lock);
|
|
|
|
/* Get device configuration from DT node or platform data. */
|
|
gpio_rcar_parse_pdata(p);
|
|
|
|
platform_set_drvdata(pdev, p);
|
|
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
|
|
if (!io || !irq) {
|
|
dev_err(&pdev->dev, "missing IRQ or IOMEM\n");
|
|
ret = -EINVAL;
|
|
goto err0;
|
|
}
|
|
|
|
p->base = devm_ioremap_nocache(&pdev->dev, io->start,
|
|
resource_size(io));
|
|
if (!p->base) {
|
|
dev_err(&pdev->dev, "failed to remap I/O memory\n");
|
|
ret = -ENXIO;
|
|
goto err0;
|
|
}
|
|
|
|
gpio_chip = &p->gpio_chip;
|
|
gpio_chip->request = gpio_rcar_request;
|
|
gpio_chip->free = gpio_rcar_free;
|
|
gpio_chip->direction_input = gpio_rcar_direction_input;
|
|
gpio_chip->get = gpio_rcar_get;
|
|
gpio_chip->direction_output = gpio_rcar_direction_output;
|
|
gpio_chip->set = gpio_rcar_set;
|
|
gpio_chip->to_irq = gpio_rcar_to_irq;
|
|
gpio_chip->label = name;
|
|
gpio_chip->dev = &pdev->dev;
|
|
gpio_chip->owner = THIS_MODULE;
|
|
gpio_chip->base = p->config.gpio_base;
|
|
gpio_chip->ngpio = p->config.number_of_pins;
|
|
|
|
irq_chip = &p->irq_chip;
|
|
irq_chip->name = name;
|
|
irq_chip->irq_mask = gpio_rcar_irq_disable;
|
|
irq_chip->irq_unmask = gpio_rcar_irq_enable;
|
|
irq_chip->irq_enable = gpio_rcar_irq_enable;
|
|
irq_chip->irq_disable = gpio_rcar_irq_disable;
|
|
irq_chip->irq_set_type = gpio_rcar_irq_set_type;
|
|
irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED;
|
|
|
|
p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
|
|
p->config.number_of_pins,
|
|
p->config.irq_base,
|
|
&gpio_rcar_irq_domain_ops, p);
|
|
if (!p->irq_domain) {
|
|
ret = -ENXIO;
|
|
dev_err(&pdev->dev, "cannot initialize irq domain\n");
|
|
goto err0;
|
|
}
|
|
|
|
if (devm_request_irq(&pdev->dev, irq->start,
|
|
gpio_rcar_irq_handler, IRQF_SHARED, name, p)) {
|
|
dev_err(&pdev->dev, "failed to request IRQ\n");
|
|
ret = -ENOENT;
|
|
goto err1;
|
|
}
|
|
|
|
ret = gpiochip_add(gpio_chip);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add GPIO controller\n");
|
|
goto err1;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "driving %d GPIOs\n", p->config.number_of_pins);
|
|
|
|
/* warn in case of mismatch if irq base is specified */
|
|
if (p->config.irq_base) {
|
|
ret = irq_find_mapping(p->irq_domain, 0);
|
|
if (p->config.irq_base != ret)
|
|
dev_warn(&pdev->dev, "irq base mismatch (%u/%u)\n",
|
|
p->config.irq_base, ret);
|
|
}
|
|
|
|
if (p->config.pctl_name) {
|
|
ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
|
|
gpio_chip->base, gpio_chip->ngpio);
|
|
if (ret < 0)
|
|
dev_warn(&pdev->dev, "failed to add pin range\n");
|
|
}
|
|
|
|
return 0;
|
|
|
|
err1:
|
|
irq_domain_remove(p->irq_domain);
|
|
err0:
|
|
return ret;
|
|
}
|
|
|
|
static int gpio_rcar_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = gpiochip_remove(&p->gpio_chip);
|
|
if (ret)
|
|
return ret;
|
|
|
|
irq_domain_remove(p->irq_domain);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id gpio_rcar_of_table[] = {
|
|
{
|
|
.compatible = "renesas,gpio-rcar",
|
|
},
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
|
|
#endif
|
|
|
|
static struct platform_driver gpio_rcar_device_driver = {
|
|
.probe = gpio_rcar_probe,
|
|
.remove = gpio_rcar_remove,
|
|
.driver = {
|
|
.name = "gpio_rcar",
|
|
.of_match_table = of_match_ptr(gpio_rcar_of_table),
|
|
}
|
|
};
|
|
|
|
module_platform_driver(gpio_rcar_device_driver);
|
|
|
|
MODULE_AUTHOR("Magnus Damm");
|
|
MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
|
|
MODULE_LICENSE("GPL v2");
|