mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 14:15:10 +07:00
73b0ca8ec7
A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2005 lines
65 KiB
C
2005 lines
65 KiB
C
/*
|
|
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
|
|
* Copyright (c) 2007-2008 Intel Corporation
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*/
|
|
#ifndef __INTEL_DRV_H__
|
|
#define __INTEL_DRV_H__
|
|
|
|
#include <linux/async.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hdmi.h>
|
|
#include <linux/sched/clock.h>
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_encoder.h>
|
|
#include <drm/drm_fb_helper.h>
|
|
#include <drm/drm_dp_dual_mode_helper.h>
|
|
#include <drm/drm_dp_mst_helper.h>
|
|
#include <drm/drm_rect.h>
|
|
#include <drm/drm_atomic.h>
|
|
|
|
/**
|
|
* _wait_for - magic (register) wait macro
|
|
*
|
|
* Does the right thing for modeset paths when run under kdgb or similar atomic
|
|
* contexts. Note that it's important that we check the condition again after
|
|
* having timed out, since the timeout could be due to preemption or similar and
|
|
* we've never had a chance to check the condition before the timeout.
|
|
*
|
|
* TODO: When modesetting has fully transitioned to atomic, the below
|
|
* drm_can_sleep() can be removed and in_atomic()/!in_atomic() asserts
|
|
* added.
|
|
*/
|
|
#define _wait_for(COND, US, W) ({ \
|
|
unsigned long timeout__ = jiffies + usecs_to_jiffies(US) + 1; \
|
|
int ret__; \
|
|
for (;;) { \
|
|
bool expired__ = time_after(jiffies, timeout__); \
|
|
if (COND) { \
|
|
ret__ = 0; \
|
|
break; \
|
|
} \
|
|
if (expired__) { \
|
|
ret__ = -ETIMEDOUT; \
|
|
break; \
|
|
} \
|
|
if ((W) && drm_can_sleep()) { \
|
|
usleep_range((W), (W)*2); \
|
|
} else { \
|
|
cpu_relax(); \
|
|
} \
|
|
} \
|
|
ret__; \
|
|
})
|
|
|
|
#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 1000)
|
|
|
|
/* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */
|
|
#if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT)
|
|
# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) WARN_ON_ONCE((ATOMIC) && !in_atomic())
|
|
#else
|
|
# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) do { } while (0)
|
|
#endif
|
|
|
|
#define _wait_for_atomic(COND, US, ATOMIC) \
|
|
({ \
|
|
int cpu, ret, timeout = (US) * 1000; \
|
|
u64 base; \
|
|
_WAIT_FOR_ATOMIC_CHECK(ATOMIC); \
|
|
if (!(ATOMIC)) { \
|
|
preempt_disable(); \
|
|
cpu = smp_processor_id(); \
|
|
} \
|
|
base = local_clock(); \
|
|
for (;;) { \
|
|
u64 now = local_clock(); \
|
|
if (!(ATOMIC)) \
|
|
preempt_enable(); \
|
|
if (COND) { \
|
|
ret = 0; \
|
|
break; \
|
|
} \
|
|
if (now - base >= timeout) { \
|
|
ret = -ETIMEDOUT; \
|
|
break; \
|
|
} \
|
|
cpu_relax(); \
|
|
if (!(ATOMIC)) { \
|
|
preempt_disable(); \
|
|
if (unlikely(cpu != smp_processor_id())) { \
|
|
timeout -= now - base; \
|
|
cpu = smp_processor_id(); \
|
|
base = local_clock(); \
|
|
} \
|
|
} \
|
|
} \
|
|
ret; \
|
|
})
|
|
|
|
#define wait_for_us(COND, US) \
|
|
({ \
|
|
int ret__; \
|
|
BUILD_BUG_ON(!__builtin_constant_p(US)); \
|
|
if ((US) > 10) \
|
|
ret__ = _wait_for((COND), (US), 10); \
|
|
else \
|
|
ret__ = _wait_for_atomic((COND), (US), 0); \
|
|
ret__; \
|
|
})
|
|
|
|
#define wait_for_atomic_us(COND, US) \
|
|
({ \
|
|
BUILD_BUG_ON(!__builtin_constant_p(US)); \
|
|
BUILD_BUG_ON((US) > 50000); \
|
|
_wait_for_atomic((COND), (US), 1); \
|
|
})
|
|
|
|
#define wait_for_atomic(COND, MS) wait_for_atomic_us((COND), (MS) * 1000)
|
|
|
|
#define KHz(x) (1000 * (x))
|
|
#define MHz(x) KHz(1000 * (x))
|
|
|
|
/*
|
|
* Display related stuff
|
|
*/
|
|
|
|
/* store information about an Ixxx DVO */
|
|
/* The i830->i865 use multiple DVOs with multiple i2cs */
|
|
/* the i915, i945 have a single sDVO i2c bus - which is different */
|
|
#define MAX_OUTPUTS 6
|
|
/* maximum connectors per crtcs in the mode set */
|
|
|
|
/* Maximum cursor sizes */
|
|
#define GEN2_CURSOR_WIDTH 64
|
|
#define GEN2_CURSOR_HEIGHT 64
|
|
#define MAX_CURSOR_WIDTH 256
|
|
#define MAX_CURSOR_HEIGHT 256
|
|
|
|
#define INTEL_I2C_BUS_DVO 1
|
|
#define INTEL_I2C_BUS_SDVO 2
|
|
|
|
/* these are outputs from the chip - integrated only
|
|
external chips are via DVO or SDVO output */
|
|
enum intel_output_type {
|
|
INTEL_OUTPUT_UNUSED = 0,
|
|
INTEL_OUTPUT_ANALOG = 1,
|
|
INTEL_OUTPUT_DVO = 2,
|
|
INTEL_OUTPUT_SDVO = 3,
|
|
INTEL_OUTPUT_LVDS = 4,
|
|
INTEL_OUTPUT_TVOUT = 5,
|
|
INTEL_OUTPUT_HDMI = 6,
|
|
INTEL_OUTPUT_DP = 7,
|
|
INTEL_OUTPUT_EDP = 8,
|
|
INTEL_OUTPUT_DSI = 9,
|
|
INTEL_OUTPUT_UNKNOWN = 10,
|
|
INTEL_OUTPUT_DP_MST = 11,
|
|
};
|
|
|
|
#define INTEL_DVO_CHIP_NONE 0
|
|
#define INTEL_DVO_CHIP_LVDS 1
|
|
#define INTEL_DVO_CHIP_TMDS 2
|
|
#define INTEL_DVO_CHIP_TVOUT 4
|
|
|
|
#define INTEL_DSI_VIDEO_MODE 0
|
|
#define INTEL_DSI_COMMAND_MODE 1
|
|
|
|
struct intel_framebuffer {
|
|
struct drm_framebuffer base;
|
|
struct drm_i915_gem_object *obj;
|
|
struct intel_rotation_info rot_info;
|
|
|
|
/* for each plane in the normal GTT view */
|
|
struct {
|
|
unsigned int x, y;
|
|
} normal[2];
|
|
/* for each plane in the rotated GTT view */
|
|
struct {
|
|
unsigned int x, y;
|
|
unsigned int pitch; /* pixels */
|
|
} rotated[2];
|
|
};
|
|
|
|
struct intel_fbdev {
|
|
struct drm_fb_helper helper;
|
|
struct intel_framebuffer *fb;
|
|
struct i915_vma *vma;
|
|
async_cookie_t cookie;
|
|
int preferred_bpp;
|
|
};
|
|
|
|
struct intel_encoder {
|
|
struct drm_encoder base;
|
|
|
|
enum intel_output_type type;
|
|
enum port port;
|
|
unsigned int cloneable;
|
|
void (*hot_plug)(struct intel_encoder *);
|
|
bool (*compute_config)(struct intel_encoder *,
|
|
struct intel_crtc_state *,
|
|
struct drm_connector_state *);
|
|
void (*pre_pll_enable)(struct intel_encoder *,
|
|
struct intel_crtc_state *,
|
|
struct drm_connector_state *);
|
|
void (*pre_enable)(struct intel_encoder *,
|
|
struct intel_crtc_state *,
|
|
struct drm_connector_state *);
|
|
void (*enable)(struct intel_encoder *,
|
|
struct intel_crtc_state *,
|
|
struct drm_connector_state *);
|
|
void (*disable)(struct intel_encoder *,
|
|
struct intel_crtc_state *,
|
|
struct drm_connector_state *);
|
|
void (*post_disable)(struct intel_encoder *,
|
|
struct intel_crtc_state *,
|
|
struct drm_connector_state *);
|
|
void (*post_pll_disable)(struct intel_encoder *,
|
|
struct intel_crtc_state *,
|
|
struct drm_connector_state *);
|
|
/* Read out the current hw state of this connector, returning true if
|
|
* the encoder is active. If the encoder is enabled it also set the pipe
|
|
* it is connected to in the pipe parameter. */
|
|
bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
|
|
/* Reconstructs the equivalent mode flags for the current hardware
|
|
* state. This must be called _after_ display->get_pipe_config has
|
|
* pre-filled the pipe config. Note that intel_encoder->base.crtc must
|
|
* be set correctly before calling this function. */
|
|
void (*get_config)(struct intel_encoder *,
|
|
struct intel_crtc_state *pipe_config);
|
|
/* Returns a mask of power domains that need to be referenced as part
|
|
* of the hardware state readout code. */
|
|
u64 (*get_power_domains)(struct intel_encoder *encoder);
|
|
/*
|
|
* Called during system suspend after all pending requests for the
|
|
* encoder are flushed (for example for DP AUX transactions) and
|
|
* device interrupts are disabled.
|
|
*/
|
|
void (*suspend)(struct intel_encoder *);
|
|
int crtc_mask;
|
|
enum hpd_pin hpd_pin;
|
|
enum intel_display_power_domain power_domain;
|
|
/* for communication with audio component; protected by av_mutex */
|
|
const struct drm_connector *audio_connector;
|
|
};
|
|
|
|
struct intel_panel {
|
|
struct drm_display_mode *fixed_mode;
|
|
struct drm_display_mode *downclock_mode;
|
|
|
|
/* backlight */
|
|
struct {
|
|
bool present;
|
|
u32 level;
|
|
u32 min;
|
|
u32 max;
|
|
bool enabled;
|
|
bool combination_mode; /* gen 2/4 only */
|
|
bool active_low_pwm;
|
|
bool alternate_pwm_increment; /* lpt+ */
|
|
|
|
/* PWM chip */
|
|
bool util_pin_active_low; /* bxt+ */
|
|
u8 controller; /* bxt+ only */
|
|
struct pwm_device *pwm;
|
|
|
|
struct backlight_device *device;
|
|
|
|
/* Connector and platform specific backlight functions */
|
|
int (*setup)(struct intel_connector *connector, enum pipe pipe);
|
|
uint32_t (*get)(struct intel_connector *connector);
|
|
void (*set)(struct intel_connector *connector, uint32_t level);
|
|
void (*disable)(struct intel_connector *connector);
|
|
void (*enable)(struct intel_connector *connector);
|
|
uint32_t (*hz_to_pwm)(struct intel_connector *connector,
|
|
uint32_t hz);
|
|
void (*power)(struct intel_connector *, bool enable);
|
|
} backlight;
|
|
};
|
|
|
|
struct intel_connector {
|
|
struct drm_connector base;
|
|
/*
|
|
* The fixed encoder this connector is connected to.
|
|
*/
|
|
struct intel_encoder *encoder;
|
|
|
|
/* ACPI device id for ACPI and driver cooperation */
|
|
u32 acpi_device_id;
|
|
|
|
/* Reads out the current hw, returning true if the connector is enabled
|
|
* and active (i.e. dpms ON state). */
|
|
bool (*get_hw_state)(struct intel_connector *);
|
|
|
|
/* Panel info for eDP and LVDS */
|
|
struct intel_panel panel;
|
|
|
|
/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
|
|
struct edid *edid;
|
|
struct edid *detect_edid;
|
|
|
|
/* since POLL and HPD connectors may use the same HPD line keep the native
|
|
state of connector->polled in case hotplug storm detection changes it */
|
|
u8 polled;
|
|
|
|
void *port; /* store this opaque as its illegal to dereference it */
|
|
|
|
struct intel_dp *mst_port;
|
|
|
|
/* Work struct to schedule a uevent on link train failure */
|
|
struct work_struct modeset_retry_work;
|
|
};
|
|
|
|
struct intel_digital_connector_state {
|
|
struct drm_connector_state base;
|
|
|
|
enum hdmi_force_audio force_audio;
|
|
int broadcast_rgb;
|
|
};
|
|
|
|
#define to_intel_digital_connector_state(x) container_of(x, struct intel_digital_connector_state, base)
|
|
|
|
struct dpll {
|
|
/* given values */
|
|
int n;
|
|
int m1, m2;
|
|
int p1, p2;
|
|
/* derived values */
|
|
int dot;
|
|
int vco;
|
|
int m;
|
|
int p;
|
|
};
|
|
|
|
struct intel_atomic_state {
|
|
struct drm_atomic_state base;
|
|
|
|
struct {
|
|
/*
|
|
* Logical state of cdclk (used for all scaling, watermark,
|
|
* etc. calculations and checks). This is computed as if all
|
|
* enabled crtcs were active.
|
|
*/
|
|
struct intel_cdclk_state logical;
|
|
|
|
/*
|
|
* Actual state of cdclk, can be different from the logical
|
|
* state only when all crtc's are DPMS off.
|
|
*/
|
|
struct intel_cdclk_state actual;
|
|
} cdclk;
|
|
|
|
bool dpll_set, modeset;
|
|
|
|
/*
|
|
* Does this transaction change the pipes that are active? This mask
|
|
* tracks which CRTC's have changed their active state at the end of
|
|
* the transaction (not counting the temporary disable during modesets).
|
|
* This mask should only be non-zero when intel_state->modeset is true,
|
|
* but the converse is not necessarily true; simply changing a mode may
|
|
* not flip the final active status of any CRTC's
|
|
*/
|
|
unsigned int active_pipe_changes;
|
|
|
|
unsigned int active_crtcs;
|
|
unsigned int min_pixclk[I915_MAX_PIPES];
|
|
|
|
struct intel_shared_dpll_state shared_dpll[I915_NUM_PLLS];
|
|
|
|
/*
|
|
* Current watermarks can't be trusted during hardware readout, so
|
|
* don't bother calculating intermediate watermarks.
|
|
*/
|
|
bool skip_intermediate_wm;
|
|
|
|
/* Gen9+ only */
|
|
struct skl_wm_values wm_results;
|
|
|
|
struct i915_sw_fence commit_ready;
|
|
|
|
struct llist_node freed;
|
|
};
|
|
|
|
struct intel_plane_state {
|
|
struct drm_plane_state base;
|
|
struct drm_rect clip;
|
|
struct i915_vma *vma;
|
|
|
|
struct {
|
|
u32 offset;
|
|
int x, y;
|
|
} main;
|
|
struct {
|
|
u32 offset;
|
|
int x, y;
|
|
} aux;
|
|
|
|
/* plane control register */
|
|
u32 ctl;
|
|
|
|
/*
|
|
* scaler_id
|
|
* = -1 : not using a scaler
|
|
* >= 0 : using a scalers
|
|
*
|
|
* plane requiring a scaler:
|
|
* - During check_plane, its bit is set in
|
|
* crtc_state->scaler_state.scaler_users by calling helper function
|
|
* update_scaler_plane.
|
|
* - scaler_id indicates the scaler it got assigned.
|
|
*
|
|
* plane doesn't require a scaler:
|
|
* - this can happen when scaling is no more required or plane simply
|
|
* got disabled.
|
|
* - During check_plane, corresponding bit is reset in
|
|
* crtc_state->scaler_state.scaler_users by calling helper function
|
|
* update_scaler_plane.
|
|
*/
|
|
int scaler_id;
|
|
|
|
struct drm_intel_sprite_colorkey ckey;
|
|
};
|
|
|
|
struct intel_initial_plane_config {
|
|
struct intel_framebuffer *fb;
|
|
unsigned int tiling;
|
|
int size;
|
|
u32 base;
|
|
};
|
|
|
|
#define SKL_MIN_SRC_W 8
|
|
#define SKL_MAX_SRC_W 4096
|
|
#define SKL_MIN_SRC_H 8
|
|
#define SKL_MAX_SRC_H 4096
|
|
#define SKL_MIN_DST_W 8
|
|
#define SKL_MAX_DST_W 4096
|
|
#define SKL_MIN_DST_H 8
|
|
#define SKL_MAX_DST_H 4096
|
|
|
|
struct intel_scaler {
|
|
int in_use;
|
|
uint32_t mode;
|
|
};
|
|
|
|
struct intel_crtc_scaler_state {
|
|
#define SKL_NUM_SCALERS 2
|
|
struct intel_scaler scalers[SKL_NUM_SCALERS];
|
|
|
|
/*
|
|
* scaler_users: keeps track of users requesting scalers on this crtc.
|
|
*
|
|
* If a bit is set, a user is using a scaler.
|
|
* Here user can be a plane or crtc as defined below:
|
|
* bits 0-30 - plane (bit position is index from drm_plane_index)
|
|
* bit 31 - crtc
|
|
*
|
|
* Instead of creating a new index to cover planes and crtc, using
|
|
* existing drm_plane_index for planes which is well less than 31
|
|
* planes and bit 31 for crtc. This should be fine to cover all
|
|
* our platforms.
|
|
*
|
|
* intel_atomic_setup_scalers will setup available scalers to users
|
|
* requesting scalers. It will gracefully fail if request exceeds
|
|
* avilability.
|
|
*/
|
|
#define SKL_CRTC_INDEX 31
|
|
unsigned scaler_users;
|
|
|
|
/* scaler used by crtc for panel fitting purpose */
|
|
int scaler_id;
|
|
};
|
|
|
|
/* drm_mode->private_flags */
|
|
#define I915_MODE_FLAG_INHERITED 1
|
|
|
|
struct intel_pipe_wm {
|
|
struct intel_wm_level wm[5];
|
|
struct intel_wm_level raw_wm[5];
|
|
uint32_t linetime;
|
|
bool fbc_wm_enabled;
|
|
bool pipe_enabled;
|
|
bool sprites_enabled;
|
|
bool sprites_scaled;
|
|
};
|
|
|
|
struct skl_plane_wm {
|
|
struct skl_wm_level wm[8];
|
|
struct skl_wm_level trans_wm;
|
|
};
|
|
|
|
struct skl_pipe_wm {
|
|
struct skl_plane_wm planes[I915_MAX_PLANES];
|
|
uint32_t linetime;
|
|
};
|
|
|
|
enum vlv_wm_level {
|
|
VLV_WM_LEVEL_PM2,
|
|
VLV_WM_LEVEL_PM5,
|
|
VLV_WM_LEVEL_DDR_DVFS,
|
|
NUM_VLV_WM_LEVELS,
|
|
};
|
|
|
|
struct vlv_wm_state {
|
|
struct g4x_pipe_wm wm[NUM_VLV_WM_LEVELS];
|
|
struct g4x_sr_wm sr[NUM_VLV_WM_LEVELS];
|
|
uint8_t num_levels;
|
|
bool cxsr;
|
|
};
|
|
|
|
struct vlv_fifo_state {
|
|
u16 plane[I915_MAX_PLANES];
|
|
};
|
|
|
|
enum g4x_wm_level {
|
|
G4X_WM_LEVEL_NORMAL,
|
|
G4X_WM_LEVEL_SR,
|
|
G4X_WM_LEVEL_HPLL,
|
|
NUM_G4X_WM_LEVELS,
|
|
};
|
|
|
|
struct g4x_wm_state {
|
|
struct g4x_pipe_wm wm;
|
|
struct g4x_sr_wm sr;
|
|
struct g4x_sr_wm hpll;
|
|
bool cxsr;
|
|
bool hpll_en;
|
|
bool fbc_en;
|
|
};
|
|
|
|
struct intel_crtc_wm_state {
|
|
union {
|
|
struct {
|
|
/*
|
|
* Intermediate watermarks; these can be
|
|
* programmed immediately since they satisfy
|
|
* both the current configuration we're
|
|
* switching away from and the new
|
|
* configuration we're switching to.
|
|
*/
|
|
struct intel_pipe_wm intermediate;
|
|
|
|
/*
|
|
* Optimal watermarks, programmed post-vblank
|
|
* when this state is committed.
|
|
*/
|
|
struct intel_pipe_wm optimal;
|
|
} ilk;
|
|
|
|
struct {
|
|
/* gen9+ only needs 1-step wm programming */
|
|
struct skl_pipe_wm optimal;
|
|
struct skl_ddb_entry ddb;
|
|
} skl;
|
|
|
|
struct {
|
|
/* "raw" watermarks (not inverted) */
|
|
struct g4x_pipe_wm raw[NUM_VLV_WM_LEVELS];
|
|
/* intermediate watermarks (inverted) */
|
|
struct vlv_wm_state intermediate;
|
|
/* optimal watermarks (inverted) */
|
|
struct vlv_wm_state optimal;
|
|
/* display FIFO split */
|
|
struct vlv_fifo_state fifo_state;
|
|
} vlv;
|
|
|
|
struct {
|
|
/* "raw" watermarks */
|
|
struct g4x_pipe_wm raw[NUM_G4X_WM_LEVELS];
|
|
/* intermediate watermarks */
|
|
struct g4x_wm_state intermediate;
|
|
/* optimal watermarks */
|
|
struct g4x_wm_state optimal;
|
|
} g4x;
|
|
};
|
|
|
|
/*
|
|
* Platforms with two-step watermark programming will need to
|
|
* update watermark programming post-vblank to switch from the
|
|
* safe intermediate watermarks to the optimal final
|
|
* watermarks.
|
|
*/
|
|
bool need_postvbl_update;
|
|
};
|
|
|
|
struct intel_crtc_state {
|
|
struct drm_crtc_state base;
|
|
|
|
/**
|
|
* quirks - bitfield with hw state readout quirks
|
|
*
|
|
* For various reasons the hw state readout code might not be able to
|
|
* completely faithfully read out the current state. These cases are
|
|
* tracked with quirk flags so that fastboot and state checker can act
|
|
* accordingly.
|
|
*/
|
|
#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
|
|
unsigned long quirks;
|
|
|
|
unsigned fb_bits; /* framebuffers to flip */
|
|
bool update_pipe; /* can a fast modeset be performed? */
|
|
bool disable_cxsr;
|
|
bool update_wm_pre, update_wm_post; /* watermarks are updated */
|
|
bool fb_changed; /* fb on any of the planes is changed */
|
|
bool fifo_changed; /* FIFO split is changed */
|
|
|
|
/* Pipe source size (ie. panel fitter input size)
|
|
* All planes will be positioned inside this space,
|
|
* and get clipped at the edges. */
|
|
int pipe_src_w, pipe_src_h;
|
|
|
|
/*
|
|
* Pipe pixel rate, adjusted for
|
|
* panel fitter/pipe scaler downscaling.
|
|
*/
|
|
unsigned int pixel_rate;
|
|
|
|
/* Whether to set up the PCH/FDI. Note that we never allow sharing
|
|
* between pch encoders and cpu encoders. */
|
|
bool has_pch_encoder;
|
|
|
|
/* Are we sending infoframes on the attached port */
|
|
bool has_infoframe;
|
|
|
|
/* CPU Transcoder for the pipe. Currently this can only differ from the
|
|
* pipe on Haswell and later (where we have a special eDP transcoder)
|
|
* and Broxton (where we have special DSI transcoders). */
|
|
enum transcoder cpu_transcoder;
|
|
|
|
/*
|
|
* Use reduced/limited/broadcast rbg range, compressing from the full
|
|
* range fed into the crtcs.
|
|
*/
|
|
bool limited_color_range;
|
|
|
|
/* Bitmask of encoder types (enum intel_output_type)
|
|
* driven by the pipe.
|
|
*/
|
|
unsigned int output_types;
|
|
|
|
/* Whether we should send NULL infoframes. Required for audio. */
|
|
bool has_hdmi_sink;
|
|
|
|
/* Audio enabled on this pipe. Only valid if either has_hdmi_sink or
|
|
* has_dp_encoder is set. */
|
|
bool has_audio;
|
|
|
|
/*
|
|
* Enable dithering, used when the selected pipe bpp doesn't match the
|
|
* plane bpp.
|
|
*/
|
|
bool dither;
|
|
|
|
/*
|
|
* Dither gets enabled for 18bpp which causes CRC mismatch errors for
|
|
* compliance video pattern tests.
|
|
* Disable dither only if it is a compliance test request for
|
|
* 18bpp.
|
|
*/
|
|
bool dither_force_disable;
|
|
|
|
/* Controls for the clock computation, to override various stages. */
|
|
bool clock_set;
|
|
|
|
/* SDVO TV has a bunch of special case. To make multifunction encoders
|
|
* work correctly, we need to track this at runtime.*/
|
|
bool sdvo_tv_clock;
|
|
|
|
/*
|
|
* crtc bandwidth limit, don't increase pipe bpp or clock if not really
|
|
* required. This is set in the 2nd loop of calling encoder's
|
|
* ->compute_config if the first pick doesn't work out.
|
|
*/
|
|
bool bw_constrained;
|
|
|
|
/* Settings for the intel dpll used on pretty much everything but
|
|
* haswell. */
|
|
struct dpll dpll;
|
|
|
|
/* Selected dpll when shared or NULL. */
|
|
struct intel_shared_dpll *shared_dpll;
|
|
|
|
/* Actual register state of the dpll, for shared dpll cross-checking. */
|
|
struct intel_dpll_hw_state dpll_hw_state;
|
|
|
|
/* DSI PLL registers */
|
|
struct {
|
|
u32 ctrl, div;
|
|
} dsi_pll;
|
|
|
|
int pipe_bpp;
|
|
struct intel_link_m_n dp_m_n;
|
|
|
|
/* m2_n2 for eDP downclock */
|
|
struct intel_link_m_n dp_m2_n2;
|
|
bool has_drrs;
|
|
|
|
/*
|
|
* Frequence the dpll for the port should run at. Differs from the
|
|
* adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
|
|
* already multiplied by pixel_multiplier.
|
|
*/
|
|
int port_clock;
|
|
|
|
/* Used by SDVO (and if we ever fix it, HDMI). */
|
|
unsigned pixel_multiplier;
|
|
|
|
uint8_t lane_count;
|
|
|
|
/*
|
|
* Used by platforms having DP/HDMI PHY with programmable lane
|
|
* latency optimization.
|
|
*/
|
|
uint8_t lane_lat_optim_mask;
|
|
|
|
/* Panel fitter controls for gen2-gen4 + VLV */
|
|
struct {
|
|
u32 control;
|
|
u32 pgm_ratios;
|
|
u32 lvds_border_bits;
|
|
} gmch_pfit;
|
|
|
|
/* Panel fitter placement and size for Ironlake+ */
|
|
struct {
|
|
u32 pos;
|
|
u32 size;
|
|
bool enabled;
|
|
bool force_thru;
|
|
} pch_pfit;
|
|
|
|
/* FDI configuration, only valid if has_pch_encoder is set. */
|
|
int fdi_lanes;
|
|
struct intel_link_m_n fdi_m_n;
|
|
|
|
bool ips_enabled;
|
|
|
|
bool enable_fbc;
|
|
|
|
bool double_wide;
|
|
|
|
int pbn;
|
|
|
|
struct intel_crtc_scaler_state scaler_state;
|
|
|
|
/* w/a for waiting 2 vblanks during crtc enable */
|
|
enum pipe hsw_workaround_pipe;
|
|
|
|
/* IVB sprite scaling w/a (WaCxSRDisabledForSpriteScaling:ivb) */
|
|
bool disable_lp_wm;
|
|
|
|
struct intel_crtc_wm_state wm;
|
|
|
|
/* Gamma mode programmed on the pipe */
|
|
uint32_t gamma_mode;
|
|
|
|
/* bitmask of visible planes (enum plane_id) */
|
|
u8 active_planes;
|
|
|
|
/* HDMI scrambling status */
|
|
bool hdmi_scrambling;
|
|
|
|
/* HDMI High TMDS char rate ratio */
|
|
bool hdmi_high_tmds_clock_ratio;
|
|
};
|
|
|
|
struct intel_crtc {
|
|
struct drm_crtc base;
|
|
enum pipe pipe;
|
|
enum plane plane;
|
|
u8 lut_r[256], lut_g[256], lut_b[256];
|
|
/*
|
|
* Whether the crtc and the connected output pipeline is active. Implies
|
|
* that crtc->enabled is set, i.e. the current mode configuration has
|
|
* some outputs connected to this crtc.
|
|
*/
|
|
bool active;
|
|
bool lowfreq_avail;
|
|
u8 plane_ids_mask;
|
|
unsigned long long enabled_power_domains;
|
|
struct intel_overlay *overlay;
|
|
struct intel_flip_work *flip_work;
|
|
|
|
atomic_t unpin_work_count;
|
|
|
|
/* Display surface base address adjustement for pageflips. Note that on
|
|
* gen4+ this only adjusts up to a tile, offsets within a tile are
|
|
* handled in the hw itself (with the TILEOFF register). */
|
|
u32 dspaddr_offset;
|
|
int adjusted_x;
|
|
int adjusted_y;
|
|
|
|
struct intel_crtc_state *config;
|
|
|
|
/* global reset count when the last flip was submitted */
|
|
unsigned int reset_count;
|
|
|
|
/* Access to these should be protected by dev_priv->irq_lock. */
|
|
bool cpu_fifo_underrun_disabled;
|
|
bool pch_fifo_underrun_disabled;
|
|
|
|
/* per-pipe watermark state */
|
|
struct {
|
|
/* watermarks currently being used */
|
|
union {
|
|
struct intel_pipe_wm ilk;
|
|
struct vlv_wm_state vlv;
|
|
struct g4x_wm_state g4x;
|
|
} active;
|
|
} wm;
|
|
|
|
int scanline_offset;
|
|
|
|
struct {
|
|
unsigned start_vbl_count;
|
|
ktime_t start_vbl_time;
|
|
int min_vbl, max_vbl;
|
|
int scanline_start;
|
|
} debug;
|
|
|
|
/* scalers available on this crtc */
|
|
int num_scalers;
|
|
};
|
|
|
|
struct intel_plane {
|
|
struct drm_plane base;
|
|
u8 plane;
|
|
enum plane_id id;
|
|
enum pipe pipe;
|
|
bool can_scale;
|
|
int max_downscale;
|
|
uint32_t frontbuffer_bit;
|
|
|
|
struct {
|
|
u32 base, cntl, size;
|
|
} cursor;
|
|
|
|
/*
|
|
* NOTE: Do not place new plane state fields here (e.g., when adding
|
|
* new plane properties). New runtime state should now be placed in
|
|
* the intel_plane_state structure and accessed via plane_state.
|
|
*/
|
|
|
|
void (*update_plane)(struct intel_plane *plane,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct intel_plane_state *plane_state);
|
|
void (*disable_plane)(struct intel_plane *plane,
|
|
struct intel_crtc *crtc);
|
|
int (*check_plane)(struct intel_plane *plane,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct intel_plane_state *state);
|
|
};
|
|
|
|
struct intel_watermark_params {
|
|
u16 fifo_size;
|
|
u16 max_wm;
|
|
u8 default_wm;
|
|
u8 guard_size;
|
|
u8 cacheline_size;
|
|
};
|
|
|
|
struct cxsr_latency {
|
|
bool is_desktop : 1;
|
|
bool is_ddr3 : 1;
|
|
u16 fsb_freq;
|
|
u16 mem_freq;
|
|
u16 display_sr;
|
|
u16 display_hpll_disable;
|
|
u16 cursor_sr;
|
|
u16 cursor_hpll_disable;
|
|
};
|
|
|
|
#define to_intel_atomic_state(x) container_of(x, struct intel_atomic_state, base)
|
|
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
|
|
#define to_intel_crtc_state(x) container_of(x, struct intel_crtc_state, base)
|
|
#define to_intel_connector(x) container_of(x, struct intel_connector, base)
|
|
#define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
|
|
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
|
|
#define to_intel_plane(x) container_of(x, struct intel_plane, base)
|
|
#define to_intel_plane_state(x) container_of(x, struct intel_plane_state, base)
|
|
#define intel_fb_obj(x) (x ? to_intel_framebuffer(x)->obj : NULL)
|
|
|
|
struct intel_hdmi {
|
|
i915_reg_t hdmi_reg;
|
|
int ddc_bus;
|
|
struct {
|
|
enum drm_dp_dual_mode_type type;
|
|
int max_tmds_clock;
|
|
} dp_dual_mode;
|
|
bool has_hdmi_sink;
|
|
bool has_audio;
|
|
bool rgb_quant_range_selectable;
|
|
struct intel_connector *attached_connector;
|
|
void (*write_infoframe)(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
enum hdmi_infoframe_type type,
|
|
const void *frame, ssize_t len);
|
|
void (*set_infoframes)(struct drm_encoder *encoder,
|
|
bool enable,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state);
|
|
bool (*infoframe_enabled)(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config);
|
|
};
|
|
|
|
struct intel_dp_mst_encoder;
|
|
#define DP_MAX_DOWNSTREAM_PORTS 0x10
|
|
|
|
/*
|
|
* enum link_m_n_set:
|
|
* When platform provides two set of M_N registers for dp, we can
|
|
* program them and switch between them incase of DRRS.
|
|
* But When only one such register is provided, we have to program the
|
|
* required divider value on that registers itself based on the DRRS state.
|
|
*
|
|
* M1_N1 : Program dp_m_n on M1_N1 registers
|
|
* dp_m2_n2 on M2_N2 registers (If supported)
|
|
*
|
|
* M2_N2 : Program dp_m2_n2 on M1_N1 registers
|
|
* M2_N2 registers are not supported
|
|
*/
|
|
|
|
enum link_m_n_set {
|
|
/* Sets the m1_n1 and m2_n2 */
|
|
M1_N1 = 0,
|
|
M2_N2
|
|
};
|
|
|
|
struct intel_dp_desc {
|
|
u8 oui[3];
|
|
u8 device_id[6];
|
|
u8 hw_rev;
|
|
u8 sw_major_rev;
|
|
u8 sw_minor_rev;
|
|
} __packed;
|
|
|
|
struct intel_dp_compliance_data {
|
|
unsigned long edid;
|
|
uint8_t video_pattern;
|
|
uint16_t hdisplay, vdisplay;
|
|
uint8_t bpc;
|
|
};
|
|
|
|
struct intel_dp_compliance {
|
|
unsigned long test_type;
|
|
struct intel_dp_compliance_data test_data;
|
|
bool test_active;
|
|
int test_link_rate;
|
|
u8 test_lane_count;
|
|
};
|
|
|
|
struct intel_dp {
|
|
i915_reg_t output_reg;
|
|
i915_reg_t aux_ch_ctl_reg;
|
|
i915_reg_t aux_ch_data_reg[5];
|
|
uint32_t DP;
|
|
int link_rate;
|
|
uint8_t lane_count;
|
|
uint8_t sink_count;
|
|
bool link_mst;
|
|
bool has_audio;
|
|
bool detect_done;
|
|
bool channel_eq_status;
|
|
bool reset_link_params;
|
|
uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
|
|
uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
|
|
uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
|
|
uint8_t edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
|
|
/* source rates */
|
|
int num_source_rates;
|
|
const int *source_rates;
|
|
/* sink rates as reported by DP_MAX_LINK_RATE/DP_SUPPORTED_LINK_RATES */
|
|
int num_sink_rates;
|
|
int sink_rates[DP_MAX_SUPPORTED_RATES];
|
|
bool use_rate_select;
|
|
/* intersection of source and sink rates */
|
|
int num_common_rates;
|
|
int common_rates[DP_MAX_SUPPORTED_RATES];
|
|
/* Max lane count for the current link */
|
|
int max_link_lane_count;
|
|
/* Max rate for the current link */
|
|
int max_link_rate;
|
|
/* sink or branch descriptor */
|
|
struct intel_dp_desc desc;
|
|
struct drm_dp_aux aux;
|
|
enum intel_display_power_domain aux_power_domain;
|
|
uint8_t train_set[4];
|
|
int panel_power_up_delay;
|
|
int panel_power_down_delay;
|
|
int panel_power_cycle_delay;
|
|
int backlight_on_delay;
|
|
int backlight_off_delay;
|
|
struct delayed_work panel_vdd_work;
|
|
bool want_panel_vdd;
|
|
unsigned long last_power_on;
|
|
unsigned long last_backlight_off;
|
|
ktime_t panel_power_off_time;
|
|
|
|
struct notifier_block edp_notifier;
|
|
|
|
/*
|
|
* Pipe whose power sequencer is currently locked into
|
|
* this port. Only relevant on VLV/CHV.
|
|
*/
|
|
enum pipe pps_pipe;
|
|
/*
|
|
* Pipe currently driving the port. Used for preventing
|
|
* the use of the PPS for any pipe currentrly driving
|
|
* external DP as that will mess things up on VLV.
|
|
*/
|
|
enum pipe active_pipe;
|
|
/*
|
|
* Set if the sequencer may be reset due to a power transition,
|
|
* requiring a reinitialization. Only relevant on BXT.
|
|
*/
|
|
bool pps_reset;
|
|
struct edp_power_seq pps_delays;
|
|
|
|
bool can_mst; /* this port supports mst */
|
|
bool is_mst;
|
|
int active_mst_links;
|
|
/* connector directly attached - won't be use for modeset in mst world */
|
|
struct intel_connector *attached_connector;
|
|
|
|
/* mst connector list */
|
|
struct intel_dp_mst_encoder *mst_encoders[I915_MAX_PIPES];
|
|
struct drm_dp_mst_topology_mgr mst_mgr;
|
|
|
|
uint32_t (*get_aux_clock_divider)(struct intel_dp *dp, int index);
|
|
/*
|
|
* This function returns the value we have to program the AUX_CTL
|
|
* register with to kick off an AUX transaction.
|
|
*/
|
|
uint32_t (*get_aux_send_ctl)(struct intel_dp *dp,
|
|
bool has_aux_irq,
|
|
int send_bytes,
|
|
uint32_t aux_clock_divider);
|
|
|
|
/* This is called before a link training is starterd */
|
|
void (*prepare_link_retrain)(struct intel_dp *intel_dp);
|
|
|
|
/* Displayport compliance testing */
|
|
struct intel_dp_compliance compliance;
|
|
};
|
|
|
|
struct intel_lspcon {
|
|
bool active;
|
|
enum drm_lspcon_mode mode;
|
|
};
|
|
|
|
struct intel_digital_port {
|
|
struct intel_encoder base;
|
|
enum port port;
|
|
u32 saved_port_bits;
|
|
struct intel_dp dp;
|
|
struct intel_hdmi hdmi;
|
|
struct intel_lspcon lspcon;
|
|
enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool);
|
|
bool release_cl2_override;
|
|
uint8_t max_lanes;
|
|
enum intel_display_power_domain ddi_io_power_domain;
|
|
};
|
|
|
|
struct intel_dp_mst_encoder {
|
|
struct intel_encoder base;
|
|
enum pipe pipe;
|
|
struct intel_digital_port *primary;
|
|
struct intel_connector *connector;
|
|
};
|
|
|
|
static inline enum dpio_channel
|
|
vlv_dport_to_channel(struct intel_digital_port *dport)
|
|
{
|
|
switch (dport->port) {
|
|
case PORT_B:
|
|
case PORT_D:
|
|
return DPIO_CH0;
|
|
case PORT_C:
|
|
return DPIO_CH1;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline enum dpio_phy
|
|
vlv_dport_to_phy(struct intel_digital_port *dport)
|
|
{
|
|
switch (dport->port) {
|
|
case PORT_B:
|
|
case PORT_C:
|
|
return DPIO_PHY0;
|
|
case PORT_D:
|
|
return DPIO_PHY1;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline enum dpio_channel
|
|
vlv_pipe_to_channel(enum pipe pipe)
|
|
{
|
|
switch (pipe) {
|
|
case PIPE_A:
|
|
case PIPE_C:
|
|
return DPIO_CH0;
|
|
case PIPE_B:
|
|
return DPIO_CH1;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline struct intel_crtc *
|
|
intel_get_crtc_for_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
|
|
{
|
|
return dev_priv->pipe_to_crtc_mapping[pipe];
|
|
}
|
|
|
|
static inline struct intel_crtc *
|
|
intel_get_crtc_for_plane(struct drm_i915_private *dev_priv, enum plane plane)
|
|
{
|
|
return dev_priv->plane_to_crtc_mapping[plane];
|
|
}
|
|
|
|
struct intel_flip_work {
|
|
struct work_struct unpin_work;
|
|
struct work_struct mmio_work;
|
|
|
|
struct drm_crtc *crtc;
|
|
struct i915_vma *old_vma;
|
|
struct drm_framebuffer *old_fb;
|
|
struct drm_i915_gem_object *pending_flip_obj;
|
|
struct drm_pending_vblank_event *event;
|
|
atomic_t pending;
|
|
u32 flip_count;
|
|
u32 gtt_offset;
|
|
struct drm_i915_gem_request *flip_queued_req;
|
|
u32 flip_queued_vblank;
|
|
u32 flip_ready_vblank;
|
|
unsigned int rotation;
|
|
};
|
|
|
|
struct intel_load_detect_pipe {
|
|
struct drm_atomic_state *restore_state;
|
|
};
|
|
|
|
static inline struct intel_encoder *
|
|
intel_attached_encoder(struct drm_connector *connector)
|
|
{
|
|
return to_intel_connector(connector)->encoder;
|
|
}
|
|
|
|
static inline struct intel_digital_port *
|
|
enc_to_dig_port(struct drm_encoder *encoder)
|
|
{
|
|
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
|
|
|
|
switch (intel_encoder->type) {
|
|
case INTEL_OUTPUT_UNKNOWN:
|
|
WARN_ON(!HAS_DDI(to_i915(encoder->dev)));
|
|
case INTEL_OUTPUT_DP:
|
|
case INTEL_OUTPUT_EDP:
|
|
case INTEL_OUTPUT_HDMI:
|
|
return container_of(encoder, struct intel_digital_port,
|
|
base.base);
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static inline struct intel_dp_mst_encoder *
|
|
enc_to_mst(struct drm_encoder *encoder)
|
|
{
|
|
return container_of(encoder, struct intel_dp_mst_encoder, base.base);
|
|
}
|
|
|
|
static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
|
|
{
|
|
return &enc_to_dig_port(encoder)->dp;
|
|
}
|
|
|
|
static inline struct intel_digital_port *
|
|
dp_to_dig_port(struct intel_dp *intel_dp)
|
|
{
|
|
return container_of(intel_dp, struct intel_digital_port, dp);
|
|
}
|
|
|
|
static inline struct intel_lspcon *
|
|
dp_to_lspcon(struct intel_dp *intel_dp)
|
|
{
|
|
return &dp_to_dig_port(intel_dp)->lspcon;
|
|
}
|
|
|
|
static inline struct intel_digital_port *
|
|
hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
|
|
{
|
|
return container_of(intel_hdmi, struct intel_digital_port, hdmi);
|
|
}
|
|
|
|
/* intel_fifo_underrun.c */
|
|
bool intel_set_cpu_fifo_underrun_reporting(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool enable);
|
|
bool intel_set_pch_fifo_underrun_reporting(struct drm_i915_private *dev_priv,
|
|
enum transcoder pch_transcoder,
|
|
bool enable);
|
|
void intel_cpu_fifo_underrun_irq_handler(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe);
|
|
void intel_pch_fifo_underrun_irq_handler(struct drm_i915_private *dev_priv,
|
|
enum transcoder pch_transcoder);
|
|
void intel_check_cpu_fifo_underruns(struct drm_i915_private *dev_priv);
|
|
void intel_check_pch_fifo_underruns(struct drm_i915_private *dev_priv);
|
|
|
|
/* i915_irq.c */
|
|
void gen5_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void gen5_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void gen6_reset_pm_iir(struct drm_i915_private *dev_priv, u32 mask);
|
|
void gen6_mask_pm_irq(struct drm_i915_private *dev_priv, u32 mask);
|
|
void gen6_unmask_pm_irq(struct drm_i915_private *dev_priv, u32 mask);
|
|
void gen6_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void gen6_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void gen6_reset_rps_interrupts(struct drm_i915_private *dev_priv);
|
|
void gen6_enable_rps_interrupts(struct drm_i915_private *dev_priv);
|
|
void gen6_disable_rps_interrupts(struct drm_i915_private *dev_priv);
|
|
|
|
static inline u32 gen6_sanitize_rps_pm_mask(const struct drm_i915_private *i915,
|
|
u32 mask)
|
|
{
|
|
return mask & ~i915->rps.pm_intrmsk_mbz;
|
|
}
|
|
|
|
void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv);
|
|
void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv);
|
|
static inline bool intel_irqs_enabled(struct drm_i915_private *dev_priv)
|
|
{
|
|
/*
|
|
* We only use drm_irq_uninstall() at unload and VT switch, so
|
|
* this is the only thing we need to check.
|
|
*/
|
|
return dev_priv->pm.irqs_enabled;
|
|
}
|
|
|
|
int intel_get_crtc_scanline(struct intel_crtc *crtc);
|
|
void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
|
|
unsigned int pipe_mask);
|
|
void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv,
|
|
unsigned int pipe_mask);
|
|
void gen9_reset_guc_interrupts(struct drm_i915_private *dev_priv);
|
|
void gen9_enable_guc_interrupts(struct drm_i915_private *dev_priv);
|
|
void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
|
|
|
|
/* intel_crt.c */
|
|
void intel_crt_init(struct drm_i915_private *dev_priv);
|
|
void intel_crt_reset(struct drm_encoder *encoder);
|
|
|
|
/* intel_ddi.c */
|
|
void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
|
|
struct intel_crtc_state *old_crtc_state,
|
|
struct drm_connector_state *old_conn_state);
|
|
void hsw_fdi_link_train(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *crtc_state);
|
|
void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port);
|
|
enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
|
|
bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
|
|
void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state);
|
|
void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
|
|
enum transcoder cpu_transcoder);
|
|
void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state);
|
|
void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state);
|
|
struct intel_encoder *
|
|
intel_ddi_get_crtc_new_encoder(struct intel_crtc_state *crtc_state);
|
|
void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state);
|
|
void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp);
|
|
bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
|
|
bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv,
|
|
struct intel_crtc *intel_crtc);
|
|
void intel_ddi_get_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config);
|
|
|
|
void intel_ddi_clock_get(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config);
|
|
void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
|
|
bool state);
|
|
uint32_t ddi_signal_levels(struct intel_dp *intel_dp);
|
|
u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder);
|
|
|
|
unsigned int intel_fb_align_height(const struct drm_framebuffer *fb,
|
|
int plane, unsigned int height);
|
|
|
|
/* intel_audio.c */
|
|
void intel_init_audio_hooks(struct drm_i915_private *dev_priv);
|
|
void intel_audio_codec_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state);
|
|
void intel_audio_codec_disable(struct intel_encoder *encoder);
|
|
void i915_audio_component_init(struct drm_i915_private *dev_priv);
|
|
void i915_audio_component_cleanup(struct drm_i915_private *dev_priv);
|
|
void intel_audio_init(struct drm_i915_private *dev_priv);
|
|
void intel_audio_deinit(struct drm_i915_private *dev_priv);
|
|
|
|
/* intel_cdclk.c */
|
|
void skl_init_cdclk(struct drm_i915_private *dev_priv);
|
|
void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
|
|
void bxt_init_cdclk(struct drm_i915_private *dev_priv);
|
|
void bxt_uninit_cdclk(struct drm_i915_private *dev_priv);
|
|
void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
|
|
void intel_update_max_cdclk(struct drm_i915_private *dev_priv);
|
|
void intel_update_cdclk(struct drm_i915_private *dev_priv);
|
|
void intel_update_rawclk(struct drm_i915_private *dev_priv);
|
|
bool intel_cdclk_state_compare(const struct intel_cdclk_state *a,
|
|
const struct intel_cdclk_state *b);
|
|
void intel_set_cdclk(struct drm_i915_private *dev_priv,
|
|
const struct intel_cdclk_state *cdclk_state);
|
|
|
|
/* intel_display.c */
|
|
enum transcoder intel_crtc_pch_transcoder(struct intel_crtc *crtc);
|
|
void intel_update_rawclk(struct drm_i915_private *dev_priv);
|
|
int vlv_get_hpll_vco(struct drm_i915_private *dev_priv);
|
|
int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
|
|
const char *name, u32 reg, int ref_freq);
|
|
int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
|
|
const char *name, u32 reg);
|
|
void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv);
|
|
void lpt_disable_iclkip(struct drm_i915_private *dev_priv);
|
|
extern const struct drm_plane_funcs intel_plane_funcs;
|
|
void intel_init_display_hooks(struct drm_i915_private *dev_priv);
|
|
unsigned int intel_fb_xy_to_linear(int x, int y,
|
|
const struct intel_plane_state *state,
|
|
int plane);
|
|
void intel_add_fb_offsets(int *x, int *y,
|
|
const struct intel_plane_state *state, int plane);
|
|
unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info);
|
|
bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv);
|
|
void intel_mark_busy(struct drm_i915_private *dev_priv);
|
|
void intel_mark_idle(struct drm_i915_private *dev_priv);
|
|
int intel_display_suspend(struct drm_device *dev);
|
|
void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv);
|
|
void intel_encoder_destroy(struct drm_encoder *encoder);
|
|
int intel_connector_init(struct intel_connector *);
|
|
struct intel_connector *intel_connector_alloc(void);
|
|
bool intel_connector_get_hw_state(struct intel_connector *connector);
|
|
void intel_connector_attach_encoder(struct intel_connector *connector,
|
|
struct intel_encoder *encoder);
|
|
struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
|
|
struct drm_crtc *crtc);
|
|
enum pipe intel_get_pipe_from_connector(struct intel_connector *connector);
|
|
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe);
|
|
static inline bool
|
|
intel_crtc_has_type(const struct intel_crtc_state *crtc_state,
|
|
enum intel_output_type type)
|
|
{
|
|
return crtc_state->output_types & (1 << type);
|
|
}
|
|
static inline bool
|
|
intel_crtc_has_dp_encoder(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
return crtc_state->output_types &
|
|
((1 << INTEL_OUTPUT_DP) |
|
|
(1 << INTEL_OUTPUT_DP_MST) |
|
|
(1 << INTEL_OUTPUT_EDP));
|
|
}
|
|
static inline void
|
|
intel_wait_for_vblank(struct drm_i915_private *dev_priv, enum pipe pipe)
|
|
{
|
|
drm_wait_one_vblank(&dev_priv->drm, pipe);
|
|
}
|
|
static inline void
|
|
intel_wait_for_vblank_if_active(struct drm_i915_private *dev_priv, int pipe)
|
|
{
|
|
const struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
|
|
|
|
if (crtc->active)
|
|
intel_wait_for_vblank(dev_priv, pipe);
|
|
}
|
|
|
|
u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc);
|
|
|
|
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
|
|
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
|
|
struct intel_digital_port *dport,
|
|
unsigned int expected_mask);
|
|
int intel_get_load_detect_pipe(struct drm_connector *connector,
|
|
struct drm_display_mode *mode,
|
|
struct intel_load_detect_pipe *old,
|
|
struct drm_modeset_acquire_ctx *ctx);
|
|
void intel_release_load_detect_pipe(struct drm_connector *connector,
|
|
struct intel_load_detect_pipe *old,
|
|
struct drm_modeset_acquire_ctx *ctx);
|
|
struct i915_vma *
|
|
intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, unsigned int rotation);
|
|
void intel_unpin_fb_vma(struct i915_vma *vma);
|
|
struct drm_framebuffer *
|
|
intel_framebuffer_create(struct drm_i915_gem_object *obj,
|
|
struct drm_mode_fb_cmd2 *mode_cmd);
|
|
void intel_finish_page_flip_cs(struct drm_i915_private *dev_priv, int pipe);
|
|
void intel_finish_page_flip_mmio(struct drm_i915_private *dev_priv, int pipe);
|
|
void intel_check_page_flip(struct drm_i915_private *dev_priv, int pipe);
|
|
int intel_prepare_plane_fb(struct drm_plane *plane,
|
|
struct drm_plane_state *new_state);
|
|
void intel_cleanup_plane_fb(struct drm_plane *plane,
|
|
struct drm_plane_state *old_state);
|
|
int intel_plane_atomic_get_property(struct drm_plane *plane,
|
|
const struct drm_plane_state *state,
|
|
struct drm_property *property,
|
|
uint64_t *val);
|
|
int intel_plane_atomic_set_property(struct drm_plane *plane,
|
|
struct drm_plane_state *state,
|
|
struct drm_property *property,
|
|
uint64_t val);
|
|
int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
|
|
struct drm_plane_state *plane_state);
|
|
|
|
void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe);
|
|
|
|
int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
|
|
const struct dpll *dpll);
|
|
void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe);
|
|
int lpt_get_iclkip(struct drm_i915_private *dev_priv);
|
|
|
|
/* modesetting asserts */
|
|
void assert_panel_unlocked(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe);
|
|
void assert_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state);
|
|
#define assert_pll_enabled(d, p) assert_pll(d, p, true)
|
|
#define assert_pll_disabled(d, p) assert_pll(d, p, false)
|
|
void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state);
|
|
#define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
|
|
#define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
|
|
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state);
|
|
#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
|
|
#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
|
|
void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
|
|
#define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
|
|
#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
|
|
u32 intel_compute_tile_offset(int *x, int *y,
|
|
const struct intel_plane_state *state, int plane);
|
|
void intel_prepare_reset(struct drm_i915_private *dev_priv);
|
|
void intel_finish_reset(struct drm_i915_private *dev_priv);
|
|
void hsw_enable_pc8(struct drm_i915_private *dev_priv);
|
|
void hsw_disable_pc8(struct drm_i915_private *dev_priv);
|
|
void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv);
|
|
void bxt_enable_dc9(struct drm_i915_private *dev_priv);
|
|
void bxt_disable_dc9(struct drm_i915_private *dev_priv);
|
|
void gen9_enable_dc5(struct drm_i915_private *dev_priv);
|
|
unsigned int skl_cdclk_get_vco(unsigned int freq);
|
|
void skl_enable_dc6(struct drm_i915_private *dev_priv);
|
|
void skl_disable_dc6(struct drm_i915_private *dev_priv);
|
|
void intel_dp_get_m_n(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config);
|
|
void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);
|
|
int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n);
|
|
bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
|
|
struct dpll *best_clock);
|
|
int chv_calc_dpll_params(int refclk, struct dpll *pll_clock);
|
|
|
|
bool intel_crtc_active(struct intel_crtc *crtc);
|
|
void hsw_enable_ips(struct intel_crtc *crtc);
|
|
void hsw_disable_ips(struct intel_crtc *crtc);
|
|
enum intel_display_power_domain intel_port_to_power_domain(enum port port);
|
|
void intel_mode_from_pipe_config(struct drm_display_mode *mode,
|
|
struct intel_crtc_state *pipe_config);
|
|
|
|
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
|
|
int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
|
|
|
|
static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
|
|
{
|
|
return i915_ggtt_offset(state->vma);
|
|
}
|
|
|
|
u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
|
|
const struct intel_plane_state *plane_state);
|
|
u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
|
|
unsigned int rotation);
|
|
int skl_check_plane_surface(struct intel_plane_state *plane_state);
|
|
int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
|
|
|
|
/* intel_csr.c */
|
|
void intel_csr_ucode_init(struct drm_i915_private *);
|
|
void intel_csr_load_program(struct drm_i915_private *);
|
|
void intel_csr_ucode_fini(struct drm_i915_private *);
|
|
void intel_csr_ucode_suspend(struct drm_i915_private *);
|
|
void intel_csr_ucode_resume(struct drm_i915_private *);
|
|
|
|
/* intel_dp.c */
|
|
bool intel_dp_init(struct drm_i915_private *dev_priv, i915_reg_t output_reg,
|
|
enum port port);
|
|
bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
|
|
struct intel_connector *intel_connector);
|
|
void intel_dp_set_link_params(struct intel_dp *intel_dp,
|
|
int link_rate, uint8_t lane_count,
|
|
bool link_mst);
|
|
int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
|
|
int link_rate, uint8_t lane_count);
|
|
void intel_dp_start_link_train(struct intel_dp *intel_dp);
|
|
void intel_dp_stop_link_train(struct intel_dp *intel_dp);
|
|
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
|
|
void intel_dp_encoder_reset(struct drm_encoder *encoder);
|
|
void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder);
|
|
void intel_dp_encoder_destroy(struct drm_encoder *encoder);
|
|
int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
|
|
bool intel_dp_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config,
|
|
struct drm_connector_state *conn_state);
|
|
bool intel_dp_is_edp(struct drm_i915_private *dev_priv, enum port port);
|
|
enum irqreturn intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port,
|
|
bool long_hpd);
|
|
void intel_edp_backlight_on(struct intel_dp *intel_dp);
|
|
void intel_edp_backlight_off(struct intel_dp *intel_dp);
|
|
void intel_edp_panel_vdd_on(struct intel_dp *intel_dp);
|
|
void intel_edp_panel_on(struct intel_dp *intel_dp);
|
|
void intel_edp_panel_off(struct intel_dp *intel_dp);
|
|
void intel_dp_mst_suspend(struct drm_device *dev);
|
|
void intel_dp_mst_resume(struct drm_device *dev);
|
|
int intel_dp_max_link_rate(struct intel_dp *intel_dp);
|
|
int intel_dp_max_lane_count(struct intel_dp *intel_dp);
|
|
int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
|
|
void intel_dp_hot_plug(struct intel_encoder *intel_encoder);
|
|
void intel_power_sequencer_reset(struct drm_i915_private *dev_priv);
|
|
uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes);
|
|
void intel_plane_destroy(struct drm_plane *plane);
|
|
void intel_edp_drrs_enable(struct intel_dp *intel_dp,
|
|
struct intel_crtc_state *crtc_state);
|
|
void intel_edp_drrs_disable(struct intel_dp *intel_dp,
|
|
struct intel_crtc_state *crtc_state);
|
|
void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
|
|
unsigned int frontbuffer_bits);
|
|
void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
|
|
unsigned int frontbuffer_bits);
|
|
|
|
void
|
|
intel_dp_program_link_training_pattern(struct intel_dp *intel_dp,
|
|
uint8_t dp_train_pat);
|
|
void
|
|
intel_dp_set_signal_levels(struct intel_dp *intel_dp);
|
|
void intel_dp_set_idle_link_train(struct intel_dp *intel_dp);
|
|
uint8_t
|
|
intel_dp_voltage_max(struct intel_dp *intel_dp);
|
|
uint8_t
|
|
intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing);
|
|
void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
|
|
uint8_t *link_bw, uint8_t *rate_select);
|
|
bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);
|
|
bool
|
|
intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]);
|
|
|
|
static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
|
|
{
|
|
return ~((1 << lane_count) - 1) & 0xf;
|
|
}
|
|
|
|
bool intel_dp_read_dpcd(struct intel_dp *intel_dp);
|
|
bool __intel_dp_read_desc(struct intel_dp *intel_dp,
|
|
struct intel_dp_desc *desc);
|
|
bool intel_dp_read_desc(struct intel_dp *intel_dp);
|
|
int intel_dp_link_required(int pixel_clock, int bpp);
|
|
int intel_dp_max_data_rate(int max_link_clock, int max_lanes);
|
|
bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
|
|
struct intel_digital_port *port);
|
|
|
|
/* intel_dp_aux_backlight.c */
|
|
int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector);
|
|
|
|
/* intel_dp_mst.c */
|
|
int intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_id);
|
|
void intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port);
|
|
/* intel_dsi.c */
|
|
void intel_dsi_init(struct drm_i915_private *dev_priv);
|
|
|
|
/* intel_dsi_dcs_backlight.c */
|
|
int intel_dsi_dcs_init_backlight_funcs(struct intel_connector *intel_connector);
|
|
|
|
/* intel_dvo.c */
|
|
void intel_dvo_init(struct drm_i915_private *dev_priv);
|
|
/* intel_hotplug.c */
|
|
void intel_hpd_poll_init(struct drm_i915_private *dev_priv);
|
|
|
|
|
|
/* legacy fbdev emulation in intel_fbdev.c */
|
|
#ifdef CONFIG_DRM_FBDEV_EMULATION
|
|
extern int intel_fbdev_init(struct drm_device *dev);
|
|
extern void intel_fbdev_initial_config_async(struct drm_device *dev);
|
|
extern void intel_fbdev_fini(struct drm_device *dev);
|
|
extern void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous);
|
|
extern void intel_fbdev_output_poll_changed(struct drm_device *dev);
|
|
extern void intel_fbdev_restore_mode(struct drm_device *dev);
|
|
#else
|
|
static inline int intel_fbdev_init(struct drm_device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void intel_fbdev_initial_config_async(struct drm_device *dev)
|
|
{
|
|
}
|
|
|
|
static inline void intel_fbdev_fini(struct drm_device *dev)
|
|
{
|
|
}
|
|
|
|
static inline void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
|
|
{
|
|
}
|
|
|
|
static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
|
|
{
|
|
}
|
|
|
|
static inline void intel_fbdev_restore_mode(struct drm_device *dev)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/* intel_fbc.c */
|
|
void intel_fbc_choose_crtc(struct drm_i915_private *dev_priv,
|
|
struct drm_atomic_state *state);
|
|
bool intel_fbc_is_active(struct drm_i915_private *dev_priv);
|
|
void intel_fbc_pre_update(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct intel_plane_state *plane_state);
|
|
void intel_fbc_post_update(struct intel_crtc *crtc);
|
|
void intel_fbc_init(struct drm_i915_private *dev_priv);
|
|
void intel_fbc_init_pipe_state(struct drm_i915_private *dev_priv);
|
|
void intel_fbc_enable(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct intel_plane_state *plane_state);
|
|
void intel_fbc_disable(struct intel_crtc *crtc);
|
|
void intel_fbc_global_disable(struct drm_i915_private *dev_priv);
|
|
void intel_fbc_invalidate(struct drm_i915_private *dev_priv,
|
|
unsigned int frontbuffer_bits,
|
|
enum fb_op_origin origin);
|
|
void intel_fbc_flush(struct drm_i915_private *dev_priv,
|
|
unsigned int frontbuffer_bits, enum fb_op_origin origin);
|
|
void intel_fbc_cleanup_cfb(struct drm_i915_private *dev_priv);
|
|
void intel_fbc_handle_fifo_underrun_irq(struct drm_i915_private *dev_priv);
|
|
|
|
/* intel_hdmi.c */
|
|
void intel_hdmi_init(struct drm_i915_private *dev_priv, i915_reg_t hdmi_reg,
|
|
enum port port);
|
|
void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
|
|
struct intel_connector *intel_connector);
|
|
struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
|
|
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config,
|
|
struct drm_connector_state *conn_state);
|
|
void intel_hdmi_handle_sink_scrambling(struct intel_encoder *intel_encoder,
|
|
struct drm_connector *connector,
|
|
bool high_tmds_clock_ratio,
|
|
bool scrambling);
|
|
void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable);
|
|
|
|
|
|
/* intel_lvds.c */
|
|
void intel_lvds_init(struct drm_i915_private *dev_priv);
|
|
struct intel_encoder *intel_get_lvds_encoder(struct drm_device *dev);
|
|
bool intel_is_dual_link_lvds(struct drm_device *dev);
|
|
|
|
|
|
/* intel_modes.c */
|
|
int intel_connector_update_modes(struct drm_connector *connector,
|
|
struct edid *edid);
|
|
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
|
|
void intel_attach_force_audio_property(struct drm_connector *connector);
|
|
void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
|
|
void intel_attach_aspect_ratio_property(struct drm_connector *connector);
|
|
|
|
|
|
/* intel_overlay.c */
|
|
void intel_setup_overlay(struct drm_i915_private *dev_priv);
|
|
void intel_cleanup_overlay(struct drm_i915_private *dev_priv);
|
|
int intel_overlay_switch_off(struct intel_overlay *overlay);
|
|
int intel_overlay_put_image_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int intel_overlay_attrs_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
void intel_overlay_reset(struct drm_i915_private *dev_priv);
|
|
|
|
|
|
/* intel_panel.c */
|
|
int intel_panel_init(struct intel_panel *panel,
|
|
struct drm_display_mode *fixed_mode,
|
|
struct drm_display_mode *downclock_mode);
|
|
void intel_panel_fini(struct intel_panel *panel);
|
|
void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
|
|
struct drm_display_mode *adjusted_mode);
|
|
void intel_pch_panel_fitting(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config,
|
|
int fitting_mode);
|
|
void intel_gmch_panel_fitting(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config,
|
|
int fitting_mode);
|
|
void intel_panel_set_backlight_acpi(struct intel_connector *connector,
|
|
u32 level, u32 max);
|
|
int intel_panel_setup_backlight(struct drm_connector *connector,
|
|
enum pipe pipe);
|
|
void intel_panel_enable_backlight(struct intel_connector *connector);
|
|
void intel_panel_disable_backlight(struct intel_connector *connector);
|
|
void intel_panel_destroy_backlight(struct drm_connector *connector);
|
|
enum drm_connector_status intel_panel_detect(struct drm_i915_private *dev_priv);
|
|
extern struct drm_display_mode *intel_find_panel_downclock(
|
|
struct drm_i915_private *dev_priv,
|
|
struct drm_display_mode *fixed_mode,
|
|
struct drm_connector *connector);
|
|
|
|
#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
|
|
int intel_backlight_device_register(struct intel_connector *connector);
|
|
void intel_backlight_device_unregister(struct intel_connector *connector);
|
|
#else /* CONFIG_BACKLIGHT_CLASS_DEVICE */
|
|
static int intel_backlight_device_register(struct intel_connector *connector)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void intel_backlight_device_unregister(struct intel_connector *connector)
|
|
{
|
|
}
|
|
#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
|
|
|
|
|
|
/* intel_psr.c */
|
|
void intel_psr_enable(struct intel_dp *intel_dp);
|
|
void intel_psr_disable(struct intel_dp *intel_dp);
|
|
void intel_psr_invalidate(struct drm_i915_private *dev_priv,
|
|
unsigned frontbuffer_bits);
|
|
void intel_psr_flush(struct drm_i915_private *dev_priv,
|
|
unsigned frontbuffer_bits,
|
|
enum fb_op_origin origin);
|
|
void intel_psr_init(struct drm_i915_private *dev_priv);
|
|
void intel_psr_single_frame_update(struct drm_i915_private *dev_priv,
|
|
unsigned frontbuffer_bits);
|
|
|
|
/* intel_runtime_pm.c */
|
|
int intel_power_domains_init(struct drm_i915_private *);
|
|
void intel_power_domains_fini(struct drm_i915_private *);
|
|
void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume);
|
|
void intel_power_domains_suspend(struct drm_i915_private *dev_priv);
|
|
void intel_power_domains_verify_state(struct drm_i915_private *dev_priv);
|
|
void bxt_display_core_init(struct drm_i915_private *dev_priv, bool resume);
|
|
void bxt_display_core_uninit(struct drm_i915_private *dev_priv);
|
|
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv);
|
|
const char *
|
|
intel_display_power_domain_str(enum intel_display_power_domain domain);
|
|
|
|
bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
void intel_display_power_get(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
void intel_display_power_put(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
|
|
static inline void
|
|
assert_rpm_device_not_suspended(struct drm_i915_private *dev_priv)
|
|
{
|
|
WARN_ONCE(dev_priv->pm.suspended,
|
|
"Device suspended during HW access\n");
|
|
}
|
|
|
|
static inline void
|
|
assert_rpm_wakelock_held(struct drm_i915_private *dev_priv)
|
|
{
|
|
assert_rpm_device_not_suspended(dev_priv);
|
|
WARN_ONCE(!atomic_read(&dev_priv->pm.wakeref_count),
|
|
"RPM wakelock ref not held during HW access");
|
|
}
|
|
|
|
/**
|
|
* disable_rpm_wakeref_asserts - disable the RPM assert checks
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function disable asserts that check if we hold an RPM wakelock
|
|
* reference, while keeping the device-not-suspended checks still enabled.
|
|
* It's meant to be used only in special circumstances where our rule about
|
|
* the wakelock refcount wrt. the device power state doesn't hold. According
|
|
* to this rule at any point where we access the HW or want to keep the HW in
|
|
* an active state we must hold an RPM wakelock reference acquired via one of
|
|
* the intel_runtime_pm_get() helpers. Currently there are a few special spots
|
|
* where this rule doesn't hold: the IRQ and suspend/resume handlers, the
|
|
* forcewake release timer, and the GPU RPS and hangcheck works. All other
|
|
* users should avoid using this function.
|
|
*
|
|
* Any calls to this function must have a symmetric call to
|
|
* enable_rpm_wakeref_asserts().
|
|
*/
|
|
static inline void
|
|
disable_rpm_wakeref_asserts(struct drm_i915_private *dev_priv)
|
|
{
|
|
atomic_inc(&dev_priv->pm.wakeref_count);
|
|
}
|
|
|
|
/**
|
|
* enable_rpm_wakeref_asserts - re-enable the RPM assert checks
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function re-enables the RPM assert checks after disabling them with
|
|
* disable_rpm_wakeref_asserts. It's meant to be used only in special
|
|
* circumstances otherwise its use should be avoided.
|
|
*
|
|
* Any calls to this function must have a symmetric call to
|
|
* disable_rpm_wakeref_asserts().
|
|
*/
|
|
static inline void
|
|
enable_rpm_wakeref_asserts(struct drm_i915_private *dev_priv)
|
|
{
|
|
atomic_dec(&dev_priv->pm.wakeref_count);
|
|
}
|
|
|
|
void intel_runtime_pm_get(struct drm_i915_private *dev_priv);
|
|
bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv);
|
|
void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv);
|
|
void intel_runtime_pm_put(struct drm_i915_private *dev_priv);
|
|
|
|
void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
|
|
|
|
void chv_phy_powergate_lanes(struct intel_encoder *encoder,
|
|
bool override, unsigned int mask);
|
|
bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
|
|
enum dpio_channel ch, bool override);
|
|
|
|
|
|
/* intel_pm.c */
|
|
void intel_init_clock_gating(struct drm_i915_private *dev_priv);
|
|
void intel_suspend_hw(struct drm_i915_private *dev_priv);
|
|
int ilk_wm_max_level(const struct drm_i915_private *dev_priv);
|
|
void intel_update_watermarks(struct intel_crtc *crtc);
|
|
void intel_init_pm(struct drm_i915_private *dev_priv);
|
|
void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv);
|
|
void intel_pm_setup(struct drm_i915_private *dev_priv);
|
|
void intel_gpu_ips_init(struct drm_i915_private *dev_priv);
|
|
void intel_gpu_ips_teardown(void);
|
|
void intel_init_gt_powersave(struct drm_i915_private *dev_priv);
|
|
void intel_cleanup_gt_powersave(struct drm_i915_private *dev_priv);
|
|
void intel_sanitize_gt_powersave(struct drm_i915_private *dev_priv);
|
|
void intel_enable_gt_powersave(struct drm_i915_private *dev_priv);
|
|
void intel_autoenable_gt_powersave(struct drm_i915_private *dev_priv);
|
|
void intel_disable_gt_powersave(struct drm_i915_private *dev_priv);
|
|
void intel_suspend_gt_powersave(struct drm_i915_private *dev_priv);
|
|
void gen6_rps_busy(struct drm_i915_private *dev_priv);
|
|
void gen6_rps_reset_ei(struct drm_i915_private *dev_priv);
|
|
void gen6_rps_idle(struct drm_i915_private *dev_priv);
|
|
void gen6_rps_boost(struct drm_i915_private *dev_priv,
|
|
struct intel_rps_client *rps,
|
|
unsigned long submitted);
|
|
void intel_queue_rps_boost_for_request(struct drm_i915_gem_request *req);
|
|
void g4x_wm_get_hw_state(struct drm_device *dev);
|
|
void vlv_wm_get_hw_state(struct drm_device *dev);
|
|
void ilk_wm_get_hw_state(struct drm_device *dev);
|
|
void skl_wm_get_hw_state(struct drm_device *dev);
|
|
void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
|
|
struct skl_ddb_allocation *ddb /* out */);
|
|
void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc,
|
|
struct skl_pipe_wm *out);
|
|
void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
|
|
void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
|
|
bool intel_can_enable_sagv(struct drm_atomic_state *state);
|
|
int intel_enable_sagv(struct drm_i915_private *dev_priv);
|
|
int intel_disable_sagv(struct drm_i915_private *dev_priv);
|
|
bool skl_wm_level_equals(const struct skl_wm_level *l1,
|
|
const struct skl_wm_level *l2);
|
|
bool skl_ddb_allocation_overlaps(const struct skl_ddb_entry **entries,
|
|
const struct skl_ddb_entry *ddb,
|
|
int ignore);
|
|
bool ilk_disable_lp_wm(struct drm_device *dev);
|
|
int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6);
|
|
int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *cstate);
|
|
static inline int intel_enable_rc6(void)
|
|
{
|
|
return i915.enable_rc6;
|
|
}
|
|
|
|
/* intel_sdvo.c */
|
|
bool intel_sdvo_init(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg, enum port port);
|
|
|
|
|
|
/* intel_sprite.c */
|
|
int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
|
|
int usecs);
|
|
struct intel_plane *intel_sprite_plane_create(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, int plane);
|
|
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
void intel_pipe_update_start(struct intel_crtc *crtc);
|
|
void intel_pipe_update_end(struct intel_crtc *crtc, struct intel_flip_work *work);
|
|
|
|
/* intel_tv.c */
|
|
void intel_tv_init(struct drm_i915_private *dev_priv);
|
|
|
|
/* intel_atomic.c */
|
|
int intel_digital_connector_atomic_get_property(struct drm_connector *connector,
|
|
const struct drm_connector_state *state,
|
|
struct drm_property *property,
|
|
uint64_t *val);
|
|
int intel_digital_connector_atomic_set_property(struct drm_connector *connector,
|
|
struct drm_connector_state *state,
|
|
struct drm_property *property,
|
|
uint64_t val);
|
|
int intel_digital_connector_atomic_check(struct drm_connector *conn,
|
|
struct drm_connector_state *new_state);
|
|
struct drm_connector_state *
|
|
intel_digital_connector_duplicate_state(struct drm_connector *connector);
|
|
|
|
struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);
|
|
void intel_crtc_destroy_state(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *state);
|
|
struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev);
|
|
void intel_atomic_state_clear(struct drm_atomic_state *);
|
|
|
|
static inline struct intel_crtc_state *
|
|
intel_atomic_get_crtc_state(struct drm_atomic_state *state,
|
|
struct intel_crtc *crtc)
|
|
{
|
|
struct drm_crtc_state *crtc_state;
|
|
crtc_state = drm_atomic_get_crtc_state(state, &crtc->base);
|
|
if (IS_ERR(crtc_state))
|
|
return ERR_CAST(crtc_state);
|
|
|
|
return to_intel_crtc_state(crtc_state);
|
|
}
|
|
|
|
static inline struct intel_crtc_state *
|
|
intel_atomic_get_existing_crtc_state(struct drm_atomic_state *state,
|
|
struct intel_crtc *crtc)
|
|
{
|
|
struct drm_crtc_state *crtc_state;
|
|
|
|
crtc_state = drm_atomic_get_existing_crtc_state(state, &crtc->base);
|
|
|
|
if (crtc_state)
|
|
return to_intel_crtc_state(crtc_state);
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static inline struct intel_plane_state *
|
|
intel_atomic_get_existing_plane_state(struct drm_atomic_state *state,
|
|
struct intel_plane *plane)
|
|
{
|
|
struct drm_plane_state *plane_state;
|
|
|
|
plane_state = drm_atomic_get_existing_plane_state(state, &plane->base);
|
|
|
|
return to_intel_plane_state(plane_state);
|
|
}
|
|
|
|
int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
|
|
struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *crtc_state);
|
|
|
|
/* intel_atomic_plane.c */
|
|
struct intel_plane_state *intel_create_plane_state(struct drm_plane *plane);
|
|
struct drm_plane_state *intel_plane_duplicate_state(struct drm_plane *plane);
|
|
void intel_plane_destroy_state(struct drm_plane *plane,
|
|
struct drm_plane_state *state);
|
|
extern const struct drm_plane_helper_funcs intel_plane_helper_funcs;
|
|
int intel_plane_atomic_check_with_state(struct intel_crtc_state *crtc_state,
|
|
struct intel_plane_state *intel_state);
|
|
|
|
/* intel_color.c */
|
|
void intel_color_init(struct drm_crtc *crtc);
|
|
int intel_color_check(struct drm_crtc *crtc, struct drm_crtc_state *state);
|
|
void intel_color_set_csc(struct drm_crtc_state *crtc_state);
|
|
void intel_color_load_luts(struct drm_crtc_state *crtc_state);
|
|
|
|
/* intel_lspcon.c */
|
|
bool lspcon_init(struct intel_digital_port *intel_dig_port);
|
|
void lspcon_resume(struct intel_lspcon *lspcon);
|
|
void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
|
|
|
|
/* intel_pipe_crc.c */
|
|
int intel_pipe_crc_create(struct drm_minor *minor);
|
|
#ifdef CONFIG_DEBUG_FS
|
|
int intel_crtc_set_crc_source(struct drm_crtc *crtc, const char *source_name,
|
|
size_t *values_cnt);
|
|
#else
|
|
#define intel_crtc_set_crc_source NULL
|
|
#endif
|
|
extern const struct file_operations i915_display_crc_ctl_fops;
|
|
#endif /* __INTEL_DRV_H__ */
|