mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 02:16:42 +07:00
31632dbdba
This brings in drivers/char/rtc.c functionality required for DECstation
and, should the maintainers decide to switch, Alpha systems to use
rtc-cmos.
Specifically these features are made available:
* RTC iomem rather than x86/PCI port I/O mapping, controlled with the
RTC_IOMAPPED macro as with the original driver. The DS1287A chip in all
DECstation systems is mapped in the host bus address space as a
contiguous block of 64 32-bit words of which the least significant byte
accesses the RTC chip for both reads and writes. All the address and
data window register accesses are made transparently by the chipset glue
logic so that the device appears directly mapped on the host bus.
* A way to set the size of the address space explicitly with the
newly-added `address_space' member of the platform part of the RTC
device structure. This avoids the unreliable heuristics that does not
work in a setup where the RTC is not explicitly accessed with the usual
address and data window register pair.
* The ability to use the RTC periodic interrupt as a system clock
device, which is implemented by arch/mips/kernel/cevt-ds1287.c for
DECstation systems and takes the RTC interrupt away from the RTC driver.
Eventually hooking back to the clock device's interrupt handler should
be possible for the purpose of the alarm clock and possibly also
update-in-progress interrupt, but this is not done by this change.
o To avoid interfering with the clock interrupt all the places where
the RTC interrupt mask is fiddled with are only executed if and IRQ
has been assigned to the RTC driver.
o To avoid changing the clock setup Register A is not fiddled with
if CMOS_RTC_FLAGS_NOFREQ is set in the newly-added `flags' member of
the platform part of the RTC device structure. Originally, in
drivers/char/rtc.c, this was keyed with the absence of the RTC
interrupt, just like the interrupt mask, but there only the periodic
interrupt frequency is set, whereas rtc-cmos also sets the divider
bits. Therefore a new flag is introduced so that systems where the
RTC interrupt is not usable rather than used as a system clock device
can fully initialise the RTC.
* A small clean-up is made to the IRQ assignment code that makes the IRQ
number hardcoded to -1 rather than arbitrary -ENXIO (or whatever error
happens to be returned by platform_get_irq) where no IRQ has been
assigned to the RTC driver (NO_IRQ might be another candidate, but it
looks like this macro has inconsistent or missing definitions and
limited use and might therefore be unsafe).
Verified to work correctly with a DECstation 5000/240 system.
[akpm@linux-foundation.org: fix weird code layout]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
124 lines
4.3 KiB
C
124 lines
4.3 KiB
C
/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
|
|
* Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
|
|
* derived from Data Sheet, Copyright Motorola 1984 (!).
|
|
* It was written to be part of the Linux operating system.
|
|
*/
|
|
/* permission is hereby granted to copy, modify and redistribute this code
|
|
* in terms of the GNU Library General Public License, Version 2 or later,
|
|
* at your option.
|
|
*/
|
|
|
|
#ifndef _MC146818RTC_H
|
|
#define _MC146818RTC_H
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/rtc.h> /* get the user-level API */
|
|
#include <asm/mc146818rtc.h> /* register access macros */
|
|
|
|
#ifdef __KERNEL__
|
|
#include <linux/spinlock.h> /* spinlock_t */
|
|
extern spinlock_t rtc_lock; /* serialize CMOS RAM access */
|
|
|
|
/* Some RTCs extend the mc146818 register set to support alarms of more
|
|
* than 24 hours in the future; or dates that include a century code.
|
|
* This platform_data structure can pass this information to the driver.
|
|
*
|
|
* Also, some platforms need suspend()/resume() hooks to kick in special
|
|
* handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up
|
|
* a separate wakeup alarm used by some almost-clone chips.
|
|
*/
|
|
struct cmos_rtc_board_info {
|
|
void (*wake_on)(struct device *dev);
|
|
void (*wake_off)(struct device *dev);
|
|
|
|
u32 flags;
|
|
#define CMOS_RTC_FLAGS_NOFREQ (1 << 0)
|
|
int address_space;
|
|
|
|
u8 rtc_day_alarm; /* zero, or register index */
|
|
u8 rtc_mon_alarm; /* zero, or register index */
|
|
u8 rtc_century; /* zero, or register index */
|
|
};
|
|
#endif
|
|
|
|
/**********************************************************************
|
|
* register summary
|
|
**********************************************************************/
|
|
#define RTC_SECONDS 0
|
|
#define RTC_SECONDS_ALARM 1
|
|
#define RTC_MINUTES 2
|
|
#define RTC_MINUTES_ALARM 3
|
|
#define RTC_HOURS 4
|
|
#define RTC_HOURS_ALARM 5
|
|
/* RTC_*_alarm is always true if 2 MSBs are set */
|
|
# define RTC_ALARM_DONT_CARE 0xC0
|
|
|
|
#define RTC_DAY_OF_WEEK 6
|
|
#define RTC_DAY_OF_MONTH 7
|
|
#define RTC_MONTH 8
|
|
#define RTC_YEAR 9
|
|
|
|
/* control registers - Moto names
|
|
*/
|
|
#define RTC_REG_A 10
|
|
#define RTC_REG_B 11
|
|
#define RTC_REG_C 12
|
|
#define RTC_REG_D 13
|
|
|
|
/**********************************************************************
|
|
* register details
|
|
**********************************************************************/
|
|
#define RTC_FREQ_SELECT RTC_REG_A
|
|
|
|
/* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus,
|
|
* reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
|
|
* totalling to a max high interval of 2.228 ms.
|
|
*/
|
|
# define RTC_UIP 0x80
|
|
# define RTC_DIV_CTL 0x70
|
|
/* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
|
|
# define RTC_REF_CLCK_4MHZ 0x00
|
|
# define RTC_REF_CLCK_1MHZ 0x10
|
|
# define RTC_REF_CLCK_32KHZ 0x20
|
|
/* 2 values for divider stage reset, others for "testing purposes only" */
|
|
# define RTC_DIV_RESET1 0x60
|
|
# define RTC_DIV_RESET2 0x70
|
|
/* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
|
|
# define RTC_RATE_SELECT 0x0F
|
|
|
|
/**********************************************************************/
|
|
#define RTC_CONTROL RTC_REG_B
|
|
# define RTC_SET 0x80 /* disable updates for clock setting */
|
|
# define RTC_PIE 0x40 /* periodic interrupt enable */
|
|
# define RTC_AIE 0x20 /* alarm interrupt enable */
|
|
# define RTC_UIE 0x10 /* update-finished interrupt enable */
|
|
# define RTC_SQWE 0x08 /* enable square-wave output */
|
|
# define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
|
|
# define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
|
|
# define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
|
|
|
|
/**********************************************************************/
|
|
#define RTC_INTR_FLAGS RTC_REG_C
|
|
/* caution - cleared by read */
|
|
# define RTC_IRQF 0x80 /* any of the following 3 is active */
|
|
# define RTC_PF 0x40
|
|
# define RTC_AF 0x20
|
|
# define RTC_UF 0x10
|
|
|
|
/**********************************************************************/
|
|
#define RTC_VALID RTC_REG_D
|
|
# define RTC_VRT 0x80 /* valid RAM and time */
|
|
/**********************************************************************/
|
|
|
|
#ifndef ARCH_RTC_LOCATION /* Override by <asm/mc146818rtc.h>? */
|
|
|
|
#define RTC_IO_EXTENT 0x8
|
|
#define RTC_IO_EXTENT_USED 0x2
|
|
#define RTC_IOMAPPED 1 /* Default to I/O mapping. */
|
|
|
|
#else
|
|
#define RTC_IO_EXTENT_USED RTC_IO_EXTENT
|
|
#endif /* ARCH_RTC_LOCATION */
|
|
|
|
#endif /* _MC146818RTC_H */
|