AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
5d25fde23b
linux_dsm_epyc7002/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
Ville Syrjälä 438b74a549 drm: Nuke fb->pixel_format 
Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.

Note that coccinelle failed to eliminate the
"/* fourcc format */" comment from drm_framebuffer.h, so I had
to do that part manually.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- a->pixel_format
+ a->format->format
|
- b.pixel_format
+ b.format->format
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- a->fb->pixel_format
+ a->fb->format->format
|
- b.fb->pixel_format
+ b.fb->format->format
)

@@
struct drm_crtc *CRTC;
@@
(
- CRTC->primary->fb->pixel_format
+ CRTC->primary->fb->format->format
|
- CRTC->primary->state->fb->pixel_format
+ CRTC->primary->state->fb->format->format
)

@@
struct drm_mode_set *set;
@@
(
- set->fb->pixel_format
+ set->fb->format->format
|
- set->crtc->primary->fb->pixel_format
+ set->crtc->primary->fb->format->format
)

@@
@@
 struct drm_framebuffer {
	 ...
-	 uint32_t pixel_format;
	 ...
 };

v2: Fix commit message (Laurent)
    Rebase due to earlier removal of many fb->pixel_format uses,
    including the 'fb->format = drm_format_info(fb->format->format);'
    snafu
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 14:55:34 +02:00

242 lines
7.1 KiB
C
Raw Blame History

/*
* Copyright (C) 2016 Marek Vasut <marex@denx.de>
*
* This code is based on drivers/video/fbdev/mxsfb.c :
* Copyright (C) 2010 Juergen Beisert, Pengutronix
* Copyright (C) 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_of.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_simple_kms_helper.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/of_graph.h>
#include <linux/platform_data/simplefb.h>
#include <video/videomode.h>
#include "mxsfb_drv.h"
#include "mxsfb_regs.h"
static u32 set_hsync_pulse_width(struct mxsfb_drm_private *mxsfb, u32 val)
{
return (val & mxsfb->devdata->hs_wdth_mask) <<
mxsfb->devdata->hs_wdth_shift;
}
/* Setup the MXSFB registers for decoding the pixels out of the framebuffer */
static int mxsfb_set_pixel_fmt(struct mxsfb_drm_private *mxsfb)
{
struct drm_crtc *crtc = &mxsfb->pipe.crtc;
struct drm_device *drm = crtc->dev;
const u32 format = crtc->primary->state->fb->format->format;
u32 ctrl, ctrl1;
ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER;
/*
* WARNING: The bus width, CTRL_SET_BUS_WIDTH(), is configured to
* match the selected mode here. This differs from the original
* MXSFB driver, which had the option to configure the bus width
* to arbitrary value. This limitation should not pose an issue.
*/
/* CTRL1 contains IRQ config and status bits, preserve those. */
ctrl1 = readl(mxsfb->base + LCDC_CTRL1);
ctrl1 &= CTRL1_CUR_FRAME_DONE_IRQ_EN | CTRL1_CUR_FRAME_DONE_IRQ;
switch (format) {
case DRM_FORMAT_RGB565:
dev_dbg(drm->dev, "Setting up RGB565 mode\n");
ctrl |= CTRL_SET_BUS_WIDTH(STMLCDIF_16BIT);
ctrl |= CTRL_SET_WORD_LENGTH(0);
ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0xf);
break;
case DRM_FORMAT_XRGB8888:
dev_dbg(drm->dev, "Setting up XRGB8888 mode\n");
ctrl |= CTRL_SET_BUS_WIDTH(STMLCDIF_24BIT);
ctrl |= CTRL_SET_WORD_LENGTH(3);
/* Do not use packed pixels = one pixel per word instead. */
ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0x7);
break;
default:
dev_err(drm->dev, "Unhandled pixel format %08x\n", format);
return -EINVAL;
}
writel(ctrl1, mxsfb->base + LCDC_CTRL1);
writel(ctrl, mxsfb->base + LCDC_CTRL);
return 0;
}
static void mxsfb_enable_controller(struct mxsfb_drm_private *mxsfb)
{
u32 reg;
if (mxsfb->clk_disp_axi)
clk_prepare_enable(mxsfb->clk_disp_axi);
clk_prepare_enable(mxsfb->clk);
mxsfb_enable_axi_clk(mxsfb);
/* If it was disabled, re-enable the mode again */
writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_SET);
/* Enable the SYNC signals first, then the DMA engine */
reg = readl(mxsfb->base + LCDC_VDCTRL4);
reg |= VDCTRL4_SYNC_SIGNALS_ON;
writel(reg, mxsfb->base + LCDC_VDCTRL4);
writel(CTRL_RUN, mxsfb->base + LCDC_CTRL + REG_SET);
}
static void mxsfb_disable_controller(struct mxsfb_drm_private *mxsfb)
{
u32 reg;
/*
* Even if we disable the controller here, it will still continue
* until its FIFOs are running out of data
*/
writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_CLR);
readl_poll_timeout(mxsfb->base + LCDC_CTRL, reg, !(reg & CTRL_RUN),
0, 1000);
reg = readl(mxsfb->base + LCDC_VDCTRL4);
reg &= ~VDCTRL4_SYNC_SIGNALS_ON;
writel(reg, mxsfb->base + LCDC_VDCTRL4);
mxsfb_disable_axi_clk(mxsfb);
clk_disable_unprepare(mxsfb->clk);
if (mxsfb->clk_disp_axi)
clk_disable_unprepare(mxsfb->clk_disp_axi);
}
static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
{
struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
int err;
/*
* It seems, you can't re-program the controller if it is still
* running. This may lead to shifted pictures (FIFO issue?), so
* first stop the controller and drain its FIFOs.
*/
mxsfb_enable_axi_clk(mxsfb);
/* Clear the FIFOs */
writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
err = mxsfb_set_pixel_fmt(mxsfb);
if (err)
return;
clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
writel(TRANSFER_COUNT_SET_VCOUNT(m->crtc_vdisplay) |
TRANSFER_COUNT_SET_HCOUNT(m->crtc_hdisplay),
mxsfb->base + mxsfb->devdata->transfer_count);
vsync_pulse_len = m->crtc_vsync_end - m->crtc_vsync_start;
vdctrl0 = VDCTRL0_ENABLE_PRESENT | /* Always in DOTCLOCK mode */
VDCTRL0_VSYNC_PERIOD_UNIT |
VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
VDCTRL0_SET_VSYNC_PULSE_WIDTH(vsync_pulse_len);
if (m->flags & DRM_MODE_FLAG_PHSYNC)
vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
if (m->flags & DRM_MODE_FLAG_PVSYNC)
vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0);
/* Frame length in lines. */
writel(m->crtc_vtotal, mxsfb->base + LCDC_VDCTRL1);
/* Line length in units of clocks or pixels. */
hsync_pulse_len = m->crtc_hsync_end - m->crtc_hsync_start;
writel(set_hsync_pulse_width(mxsfb, hsync_pulse_len) |
VDCTRL2_SET_HSYNC_PERIOD(m->crtc_htotal),
mxsfb->base + LCDC_VDCTRL2);
writel(SET_HOR_WAIT_CNT(m->crtc_hblank_end - m->crtc_hsync_end) |
SET_VERT_WAIT_CNT(m->crtc_vblank_end - m->crtc_vsync_end),
mxsfb->base + LCDC_VDCTRL3);
writel(SET_DOTCLK_H_VALID_DATA_CNT(m->hdisplay),
mxsfb->base + LCDC_VDCTRL4);
mxsfb_disable_axi_clk(mxsfb);
}
void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
{
mxsfb_crtc_mode_set_nofb(mxsfb);
mxsfb_enable_controller(mxsfb);
}
void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
{
mxsfb_disable_controller(mxsfb);
}
void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
struct drm_plane_state *state)
{
struct drm_simple_display_pipe *pipe = &mxsfb->pipe;
struct drm_crtc *crtc = &pipe->crtc;
struct drm_framebuffer *fb = pipe->plane.state->fb;
struct drm_pending_vblank_event *event;
struct drm_gem_cma_object *gem;
if (!crtc)
return;
spin_lock_irq(&crtc->dev->event_lock);
event = crtc->state->event;
if (event) {
crtc->state->event = NULL;
if (drm_crtc_vblank_get(crtc) == 0) {
drm_crtc_arm_vblank_event(crtc, event);
} else {
drm_crtc_send_vblank_event(crtc, event);
}
}
spin_unlock_irq(&crtc->dev->event_lock);
if (!fb)
return;
gem = drm_fb_cma_get_gem_obj(fb, 0);
mxsfb_enable_axi_clk(mxsfb);
writel(gem->paddr, mxsfb->base + mxsfb->devdata->next_buf);
mxsfb_disable_axi_clk(mxsfb);
}
Reference in New Issue View Git Blame Copy Permalink