mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-07 09:36:40 +07:00
a62e256b14
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
564 lines
14 KiB
C
564 lines
14 KiB
C
/*
|
|
* srf08.c - Support for Devantech SRFxx ultrasonic ranger
|
|
* with i2c interface
|
|
* actually supported are srf02, srf08, srf10
|
|
*
|
|
* Copyright (c) 2016, 2017 Andreas Klinger <ak@it-klinger.de>
|
|
*
|
|
* This file is subject to the terms and conditions of version 2 of
|
|
* the GNU General Public License. See the file COPYING in the main
|
|
* directory of this archive for more details.
|
|
*
|
|
* For details about the device see:
|
|
* http://www.robot-electronics.co.uk/htm/srf08tech.html
|
|
* http://www.robot-electronics.co.uk/htm/srf10tech.htm
|
|
* http://www.robot-electronics.co.uk/htm/srf02tech.htm
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
/* registers of SRF08 device */
|
|
#define SRF08_WRITE_COMMAND 0x00 /* Command Register */
|
|
#define SRF08_WRITE_MAX_GAIN 0x01 /* Max Gain Register: 0 .. 31 */
|
|
#define SRF08_WRITE_RANGE 0x02 /* Range Register: 0 .. 255 */
|
|
#define SRF08_READ_SW_REVISION 0x00 /* Software Revision */
|
|
#define SRF08_READ_LIGHT 0x01 /* Light Sensor during last echo */
|
|
#define SRF08_READ_ECHO_1_HIGH 0x02 /* Range of first echo received */
|
|
#define SRF08_READ_ECHO_1_LOW 0x03 /* Range of first echo received */
|
|
|
|
#define SRF08_CMD_RANGING_CM 0x51 /* Ranging Mode - Result in cm */
|
|
|
|
enum srf08_sensor_type {
|
|
SRF02,
|
|
SRF08,
|
|
SRF10,
|
|
SRF_MAX_TYPE
|
|
};
|
|
|
|
struct srf08_chip_info {
|
|
const int *sensitivity_avail;
|
|
int num_sensitivity_avail;
|
|
int sensitivity_default;
|
|
|
|
/* default value of Range in mm */
|
|
int range_default;
|
|
};
|
|
|
|
struct srf08_data {
|
|
struct i2c_client *client;
|
|
|
|
/*
|
|
* Gain in the datasheet is called sensitivity here to distinct it
|
|
* from the gain used with amplifiers of adc's
|
|
*/
|
|
int sensitivity;
|
|
|
|
/* max. Range in mm */
|
|
int range_mm;
|
|
struct mutex lock;
|
|
|
|
/*
|
|
* triggered buffer
|
|
* 1x16-bit channel + 3x16 padding + 4x16 timestamp
|
|
*/
|
|
s16 buffer[8];
|
|
|
|
/* Sensor-Type */
|
|
enum srf08_sensor_type sensor_type;
|
|
|
|
/* Chip-specific information */
|
|
const struct srf08_chip_info *chip_info;
|
|
};
|
|
|
|
/*
|
|
* in the documentation one can read about the "Gain" of the device
|
|
* which is used here for amplifying the signal and filtering out unwanted
|
|
* ones.
|
|
* But with ADC's this term is already used differently and that's why it
|
|
* is called "Sensitivity" here.
|
|
*/
|
|
static const struct srf08_chip_info srf02_chip_info = {
|
|
.sensitivity_avail = NULL,
|
|
.num_sensitivity_avail = 0,
|
|
.sensitivity_default = 0,
|
|
|
|
.range_default = 0,
|
|
};
|
|
|
|
static const int srf08_sensitivity_avail[] = {
|
|
94, 97, 100, 103, 107, 110, 114, 118,
|
|
123, 128, 133, 139, 145, 152, 159, 168,
|
|
177, 187, 199, 212, 227, 245, 265, 288,
|
|
317, 352, 395, 450, 524, 626, 777, 1025
|
|
};
|
|
|
|
static const struct srf08_chip_info srf08_chip_info = {
|
|
.sensitivity_avail = srf08_sensitivity_avail,
|
|
.num_sensitivity_avail = ARRAY_SIZE(srf08_sensitivity_avail),
|
|
.sensitivity_default = 1025,
|
|
|
|
.range_default = 6020,
|
|
};
|
|
|
|
static const int srf10_sensitivity_avail[] = {
|
|
40, 40, 50, 60, 70, 80, 100, 120,
|
|
140, 200, 250, 300, 350, 400, 500, 600,
|
|
700,
|
|
};
|
|
|
|
static const struct srf08_chip_info srf10_chip_info = {
|
|
.sensitivity_avail = srf10_sensitivity_avail,
|
|
.num_sensitivity_avail = ARRAY_SIZE(srf10_sensitivity_avail),
|
|
.sensitivity_default = 700,
|
|
|
|
.range_default = 6020,
|
|
};
|
|
|
|
static int srf08_read_ranging(struct srf08_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int ret, i;
|
|
int waittime;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
SRF08_WRITE_COMMAND, SRF08_CMD_RANGING_CM);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "write command - err: %d\n", ret);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* we read here until a correct version number shows up as
|
|
* suggested by the documentation
|
|
*
|
|
* with an ultrasonic speed of 343 m/s and a roundtrip of it
|
|
* sleep the expected duration and try to read from the device
|
|
* if nothing useful is read try it in a shorter grid
|
|
*
|
|
* polling for not more than 20 ms should be enough
|
|
*/
|
|
waittime = 1 + data->range_mm / 172;
|
|
msleep(waittime);
|
|
for (i = 0; i < 4; i++) {
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
SRF08_READ_SW_REVISION);
|
|
|
|
/* check if a valid version number is read */
|
|
if (ret < 255 && ret > 0)
|
|
break;
|
|
msleep(5);
|
|
}
|
|
|
|
if (ret >= 255 || ret <= 0) {
|
|
dev_err(&client->dev, "device not ready\n");
|
|
mutex_unlock(&data->lock);
|
|
return -EIO;
|
|
}
|
|
|
|
ret = i2c_smbus_read_word_swapped(data->client,
|
|
SRF08_READ_ECHO_1_HIGH);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "cannot read distance: ret=%d\n", ret);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t srf08_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct srf08_data *data = iio_priv(indio_dev);
|
|
s16 sensor_data;
|
|
|
|
sensor_data = srf08_read_ranging(data);
|
|
if (sensor_data < 0)
|
|
goto err;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
data->buffer[0] = sensor_data;
|
|
iio_push_to_buffers_with_timestamp(indio_dev,
|
|
data->buffer, pf->timestamp);
|
|
|
|
mutex_unlock(&data->lock);
|
|
err:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int srf08_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct srf08_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (channel->type != IIO_DISTANCE)
|
|
return -EINVAL;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = srf08_read_ranging(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/* 1 LSB is 1 cm */
|
|
*val = 0;
|
|
*val2 = 10000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static ssize_t srf08_show_range_mm_available(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "[0.043 0.043 11.008]\n");
|
|
}
|
|
|
|
static IIO_DEVICE_ATTR(sensor_max_range_available, S_IRUGO,
|
|
srf08_show_range_mm_available, NULL, 0);
|
|
|
|
static ssize_t srf08_show_range_mm(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct srf08_data *data = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d.%03d\n", data->range_mm / 1000,
|
|
data->range_mm % 1000);
|
|
}
|
|
|
|
/*
|
|
* set the range of the sensor to an even multiple of 43 mm
|
|
* which corresponds to 1 LSB in the register
|
|
*
|
|
* register value corresponding range
|
|
* 0x00 43 mm
|
|
* 0x01 86 mm
|
|
* 0x02 129 mm
|
|
* ...
|
|
* 0xFF 11008 mm
|
|
*/
|
|
static ssize_t srf08_write_range_mm(struct srf08_data *data, unsigned int val)
|
|
{
|
|
int ret;
|
|
struct i2c_client *client = data->client;
|
|
unsigned int mod;
|
|
u8 regval;
|
|
|
|
ret = val / 43 - 1;
|
|
mod = val % 43;
|
|
|
|
if (mod || (ret < 0) || (ret > 255))
|
|
return -EINVAL;
|
|
|
|
regval = ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
ret = i2c_smbus_write_byte_data(client, SRF08_WRITE_RANGE, regval);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "write_range - err: %d\n", ret);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
data->range_mm = val;
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t srf08_store_range_mm(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct srf08_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
int integer, fract;
|
|
|
|
ret = iio_str_to_fixpoint(buf, 100, &integer, &fract);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = srf08_write_range_mm(data, integer * 1000 + fract);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEVICE_ATTR(sensor_max_range, S_IRUGO | S_IWUSR,
|
|
srf08_show_range_mm, srf08_store_range_mm, 0);
|
|
|
|
static ssize_t srf08_show_sensitivity_available(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int i, len = 0;
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct srf08_data *data = iio_priv(indio_dev);
|
|
|
|
for (i = 0; i < data->chip_info->num_sensitivity_avail; i++)
|
|
if (data->chip_info->sensitivity_avail[i])
|
|
len += sprintf(buf + len, "%d ",
|
|
data->chip_info->sensitivity_avail[i]);
|
|
|
|
len += sprintf(buf + len, "\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEVICE_ATTR(sensor_sensitivity_available, S_IRUGO,
|
|
srf08_show_sensitivity_available, NULL, 0);
|
|
|
|
static ssize_t srf08_show_sensitivity(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct srf08_data *data = iio_priv(indio_dev);
|
|
int len;
|
|
|
|
len = sprintf(buf, "%d\n", data->sensitivity);
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t srf08_write_sensitivity(struct srf08_data *data,
|
|
unsigned int val)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int ret, i;
|
|
u8 regval;
|
|
|
|
if (!val)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < data->chip_info->num_sensitivity_avail; i++)
|
|
if (val && (val == data->chip_info->sensitivity_avail[i])) {
|
|
regval = i;
|
|
break;
|
|
}
|
|
|
|
if (i >= data->chip_info->num_sensitivity_avail)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
ret = i2c_smbus_write_byte_data(client, SRF08_WRITE_MAX_GAIN, regval);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "write_sensitivity - err: %d\n", ret);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
data->sensitivity = val;
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t srf08_store_sensitivity(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct srf08_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
ret = kstrtouint(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = srf08_write_sensitivity(data, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
|
|
srf08_show_sensitivity, srf08_store_sensitivity, 0);
|
|
|
|
static struct attribute *srf08_attributes[] = {
|
|
&iio_dev_attr_sensor_max_range.dev_attr.attr,
|
|
&iio_dev_attr_sensor_max_range_available.dev_attr.attr,
|
|
&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
|
|
&iio_dev_attr_sensor_sensitivity_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group srf08_attribute_group = {
|
|
.attrs = srf08_attributes,
|
|
};
|
|
|
|
static const struct iio_chan_spec srf08_channels[] = {
|
|
{
|
|
.type = IIO_DISTANCE,
|
|
.info_mask_separate =
|
|
BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.scan_index = 0,
|
|
.scan_type = {
|
|
.sign = 's',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_CPU,
|
|
},
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(1),
|
|
};
|
|
|
|
static const struct iio_info srf08_info = {
|
|
.read_raw = srf08_read_raw,
|
|
.attrs = &srf08_attribute_group,
|
|
};
|
|
|
|
/*
|
|
* srf02 don't have an adjustable range or sensitivity,
|
|
* so we don't need attributes at all
|
|
*/
|
|
static const struct iio_info srf02_info = {
|
|
.read_raw = srf08_read_raw,
|
|
};
|
|
|
|
static int srf08_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct srf08_data *data;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_READ_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_READ_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
data->sensor_type = (enum srf08_sensor_type)id->driver_data;
|
|
|
|
switch (data->sensor_type) {
|
|
case SRF02:
|
|
data->chip_info = &srf02_chip_info;
|
|
indio_dev->info = &srf02_info;
|
|
break;
|
|
case SRF08:
|
|
data->chip_info = &srf08_chip_info;
|
|
indio_dev->info = &srf08_info;
|
|
break;
|
|
case SRF10:
|
|
data->chip_info = &srf10_chip_info;
|
|
indio_dev->info = &srf08_info;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
indio_dev->name = id->name;
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = srf08_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(srf08_channels);
|
|
|
|
mutex_init(&data->lock);
|
|
|
|
ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
|
|
iio_pollfunc_store_time, srf08_trigger_handler, NULL);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "setup of iio triggered buffer failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (data->chip_info->range_default) {
|
|
/*
|
|
* set default range of device in mm here
|
|
* these register values cannot be read from the hardware
|
|
* therefore set driver specific default values
|
|
*
|
|
* srf02 don't have a default value so it'll be omitted
|
|
*/
|
|
ret = srf08_write_range_mm(data,
|
|
data->chip_info->range_default);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (data->chip_info->sensitivity_default) {
|
|
/*
|
|
* set default sensitivity of device here
|
|
* these register values cannot be read from the hardware
|
|
* therefore set driver specific default values
|
|
*
|
|
* srf02 don't have a default value so it'll be omitted
|
|
*/
|
|
ret = srf08_write_sensitivity(data,
|
|
data->chip_info->sensitivity_default);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct of_device_id of_srf08_match[] = {
|
|
{ .compatible = "devantech,srf02", (void *)SRF02},
|
|
{ .compatible = "devantech,srf08", (void *)SRF08},
|
|
{ .compatible = "devantech,srf10", (void *)SRF10},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, of_srf08_match);
|
|
|
|
static const struct i2c_device_id srf08_id[] = {
|
|
{ "srf02", SRF02 },
|
|
{ "srf08", SRF08 },
|
|
{ "srf10", SRF10 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, srf08_id);
|
|
|
|
static struct i2c_driver srf08_driver = {
|
|
.driver = {
|
|
.name = "srf08",
|
|
.of_match_table = of_srf08_match,
|
|
},
|
|
.probe = srf08_probe,
|
|
.id_table = srf08_id,
|
|
};
|
|
module_i2c_driver(srf08_driver);
|
|
|
|
MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
|
|
MODULE_DESCRIPTION("Devantech SRF02/SRF08/SRF10 i2c ultrasonic ranger driver");
|
|
MODULE_LICENSE("GPL");
|