linux_dsm_epyc7002/sound/firewire/tascam/tascam-transaction.c
Takashi Sakamoto 1f94205d22 ALSA: firewire-tascam: move message parameters for async midi port
Units on TASCAM FireWire series handle MIDI messages with support for
running status. Drivers for the series should remember current running
status and transfer valid MIDI messages. For this purpose, current
ALSA driver for the series has some members in its top-level structure.
This is due to better abstraction of async midi port. Nowadays, the
abstraction was localized just for the driver.

This commit moves the members to structure for async midi port.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:40 +02:00

401 lines
10 KiB
C

/*
* tascam-transaction.c - a part of driver for TASCAM FireWire series
*
* Copyright (c) 2015 Takashi Sakamoto
*
* Licensed under the terms of the GNU General Public License, version 2.
*/
#include "tascam.h"
/*
* When return minus value, given argument is not MIDI status.
* When return 0, given argument is a beginning of system exclusive.
* When return the others, given argument is MIDI data.
*/
static inline int calculate_message_bytes(u8 status)
{
switch (status) {
case 0xf6: /* Tune request. */
case 0xf8: /* Timing clock. */
case 0xfa: /* Start. */
case 0xfb: /* Continue. */
case 0xfc: /* Stop. */
case 0xfe: /* Active sensing. */
case 0xff: /* System reset. */
return 1;
case 0xf1: /* MIDI time code quarter frame. */
case 0xf3: /* Song select. */
return 2;
case 0xf2: /* Song position pointer. */
return 3;
case 0xf0: /* Exclusive. */
return 0;
case 0xf7: /* End of exclusive. */
break;
case 0xf4: /* Undefined. */
case 0xf5: /* Undefined. */
case 0xf9: /* Undefined. */
case 0xfd: /* Undefined. */
break;
default:
switch (status & 0xf0) {
case 0x80: /* Note on. */
case 0x90: /* Note off. */
case 0xa0: /* Polyphonic key pressure. */
case 0xb0: /* Control change and Mode change. */
case 0xe0: /* Pitch bend change. */
return 3;
case 0xc0: /* Program change. */
case 0xd0: /* Channel pressure. */
return 2;
default:
break;
}
break;
}
return -EINVAL;
}
static int fill_message(struct snd_fw_async_midi_port *port,
struct snd_rawmidi_substream *substream)
{
int i, len, consume;
u8 *label, *msg;
u8 status;
/* The first byte is used for label, the rest for MIDI bytes. */
label = port->buf;
msg = port->buf + 1;
consume = snd_rawmidi_transmit_peek(substream, msg, 3);
if (consume == 0)
return 0;
/* On exclusive message. */
if (port->on_sysex) {
/* Seek the end of exclusives. */
for (i = 0; i < consume; ++i) {
if (msg[i] == 0xf7) {
port->on_sysex = false;
break;
}
}
/* At the end of exclusive message, use label 0x07. */
if (!port->on_sysex) {
consume = i + 1;
*label = (substream->number << 4) | 0x07;
/* During exclusive message, use label 0x04. */
} else if (consume == 3) {
*label = (substream->number << 4) | 0x04;
/* We need to fill whole 3 bytes. Go to next change. */
} else {
return 0;
}
len = consume;
} else {
/* The beginning of exclusives. */
if (msg[0] == 0xf0) {
/* Transfer it in next chance in another condition. */
port->on_sysex = true;
return 0;
} else {
/* On running-status. */
if ((msg[0] & 0x80) != 0x80)
status = port->running_status;
else
status = msg[0];
/* Calculate consume bytes. */
len = calculate_message_bytes(status);
if (len <= 0)
return 0;
/* On running-status. */
if ((msg[0] & 0x80) != 0x80) {
/* Enough MIDI bytes were not retrieved. */
if (consume < len - 1)
return 0;
consume = len - 1;
msg[2] = msg[1];
msg[1] = msg[0];
msg[0] = port->running_status;
} else {
/* Enough MIDI bytes were not retrieved. */
if (consume < len)
return 0;
consume = len;
port->running_status = msg[0];
}
}
*label = (substream->number << 4) | (msg[0] >> 4);
}
if (len > 0 && len < 3)
memset(msg + len, 0, 3 - len);
return consume;
}
static void async_midi_port_callback(struct fw_card *card, int rcode,
void *data, size_t length,
void *callback_data)
{
struct snd_fw_async_midi_port *port = callback_data;
struct snd_rawmidi_substream *substream = ACCESS_ONCE(port->substream);
/* This port is closed. */
if (substream == NULL)
return;
if (rcode == RCODE_COMPLETE)
snd_rawmidi_transmit_ack(substream, port->consume_bytes);
else if (!rcode_is_permanent_error(rcode))
/* To start next transaction immediately for recovery. */
port->next_ktime = 0;
else
/* Don't continue processing. */
port->error = true;
port->idling = true;
if (!snd_rawmidi_transmit_empty(substream))
schedule_work(&port->work);
}
static void midi_port_work(struct work_struct *work)
{
struct snd_fw_async_midi_port *port =
container_of(work, struct snd_fw_async_midi_port, work);
struct snd_rawmidi_substream *substream = ACCESS_ONCE(port->substream);
int generation;
/* Under transacting or error state. */
if (!port->idling || port->error)
return;
/* Nothing to do. */
if (substream == NULL || snd_rawmidi_transmit_empty(substream))
return;
/* Do it in next chance. */
if (ktime_after(port->next_ktime, ktime_get())) {
schedule_work(&port->work);
return;
}
/*
* Fill the buffer. The callee must use snd_rawmidi_transmit_peek().
* Later, snd_rawmidi_transmit_ack() is called.
*/
memset(port->buf, 0, 4);
port->consume_bytes = fill_message(port, substream);
if (port->consume_bytes <= 0) {
/* Do it in next chance, immediately. */
if (port->consume_bytes == 0) {
port->next_ktime = 0;
schedule_work(&port->work);
} else {
/* Fatal error. */
port->error = true;
}
return;
}
/* Set interval to next transaction. */
port->next_ktime = ktime_add_ns(ktime_get(),
port->consume_bytes * 8 * NSEC_PER_SEC / 31250);
/* Start this transaction. */
port->idling = false;
/*
* In Linux FireWire core, when generation is updated with memory
* barrier, node id has already been updated. In this module, After
* this smp_rmb(), load/store instructions to memory are completed.
* Thus, both of generation and node id are available with recent
* values. This is a light-serialization solution to handle bus reset
* events on IEEE 1394 bus.
*/
generation = port->parent->generation;
smp_rmb();
fw_send_request(port->parent->card, &port->transaction,
TCODE_WRITE_QUADLET_REQUEST,
port->parent->node_id, generation,
port->parent->max_speed,
TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_RX_QUAD,
port->buf, 4, async_midi_port_callback,
port);
}
void snd_fw_async_midi_port_init(struct snd_fw_async_midi_port *port)
{
port->idling = true;
port->error = false;
port->running_status = 0;
port->on_sysex = false;
}
static void handle_midi_tx(struct fw_card *card, struct fw_request *request,
int tcode, int destination, int source,
int generation, unsigned long long offset,
void *data, size_t length, void *callback_data)
{
struct snd_tscm *tscm = callback_data;
u32 *buf = (u32 *)data;
unsigned int messages;
unsigned int i;
unsigned int port;
struct snd_rawmidi_substream *substream;
u8 *b;
int bytes;
if (offset != tscm->async_handler.offset)
goto end;
messages = length / 8;
for (i = 0; i < messages; i++) {
b = (u8 *)(buf + i * 2);
port = b[0] >> 4;
/* TODO: support virtual MIDI ports. */
if (port >= tscm->spec->midi_capture_ports)
goto end;
/* Assume the message length. */
bytes = calculate_message_bytes(b[1]);
/* On MIDI data or exclusives. */
if (bytes <= 0) {
/* Seek the end of exclusives. */
for (bytes = 1; bytes < 4; bytes++) {
if (b[bytes] == 0xf7)
break;
}
if (bytes == 4)
bytes = 3;
}
substream = ACCESS_ONCE(tscm->tx_midi_substreams[port]);
if (substream != NULL)
snd_rawmidi_receive(substream, b + 1, bytes);
}
end:
fw_send_response(card, request, RCODE_COMPLETE);
}
int snd_tscm_transaction_register(struct snd_tscm *tscm)
{
static const struct fw_address_region resp_register_region = {
.start = 0xffffe0000000ull,
.end = 0xffffe000ffffull,
};
unsigned int i;
int err;
/*
* Usually, two quadlets are transferred by one transaction. The first
* quadlet has MIDI messages, the rest includes timestamp.
* Sometimes, 8 set of the data is transferred by a block transaction.
*/
tscm->async_handler.length = 8 * 8;
tscm->async_handler.address_callback = handle_midi_tx;
tscm->async_handler.callback_data = tscm;
err = fw_core_add_address_handler(&tscm->async_handler,
&resp_register_region);
if (err < 0)
return err;
err = snd_tscm_transaction_reregister(tscm);
if (err < 0)
goto error;
for (i = 0; i < TSCM_MIDI_OUT_PORT_MAX; i++) {
tscm->out_ports[i].parent = fw_parent_device(tscm->unit);
tscm->out_ports[i].next_ktime = 0;
INIT_WORK(&tscm->out_ports[i].work, midi_port_work);
}
return err;
error:
fw_core_remove_address_handler(&tscm->async_handler);
tscm->async_handler.callback_data = NULL;
return err;
}
/* At bus reset, these registers are cleared. */
int snd_tscm_transaction_reregister(struct snd_tscm *tscm)
{
struct fw_device *device = fw_parent_device(tscm->unit);
__be32 reg;
int err;
/* Register messaging address. Block transaction is not allowed. */
reg = cpu_to_be32((device->card->node_id << 16) |
(tscm->async_handler.offset >> 32));
err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
&reg, sizeof(reg), 0);
if (err < 0)
return err;
reg = cpu_to_be32(tscm->async_handler.offset);
err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
&reg, sizeof(reg), 0);
if (err < 0)
return err;
/* Turn on messaging. */
reg = cpu_to_be32(0x00000001);
err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
&reg, sizeof(reg), 0);
if (err < 0)
return err;
/* Turn on FireWire LED. */
reg = cpu_to_be32(0x0001008e);
return snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
&reg, sizeof(reg), 0);
}
void snd_tscm_transaction_unregister(struct snd_tscm *tscm)
{
__be32 reg;
if (tscm->async_handler.callback_data == NULL)
return;
/* Turn off FireWire LED. */
reg = cpu_to_be32(0x0000008e);
snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
&reg, sizeof(reg), 0);
/* Turn off messaging. */
reg = cpu_to_be32(0x00000000);
snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
&reg, sizeof(reg), 0);
/* Unregister the address. */
snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
&reg, sizeof(reg), 0);
snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
&reg, sizeof(reg), 0);
fw_core_remove_address_handler(&tscm->async_handler);
tscm->async_handler.callback_data = NULL;
}