mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 16:36:47 +07:00
ccae7af2bf
Move the tuners one level up, as the "common" directory will be used by drivers that are shared between more than one driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
476 lines
12 KiB
C
476 lines
12 KiB
C
/*
|
|
* For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
|
|
* I2C address is allways 0xC0.
|
|
*
|
|
*
|
|
* Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@infradead.org)
|
|
* This code is placed under the terms of the GNU General Public License
|
|
*
|
|
* tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
|
|
* from their contributions on DScaler.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/videodev2.h>
|
|
#include "tuner-i2c.h"
|
|
#include "tea5767.h"
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "enable verbose debug messages");
|
|
|
|
/*****************************************************************************/
|
|
|
|
struct tea5767_priv {
|
|
struct tuner_i2c_props i2c_props;
|
|
u32 frequency;
|
|
struct tea5767_ctrl ctrl;
|
|
};
|
|
|
|
/*****************************************************************************/
|
|
|
|
/******************************
|
|
* Write mode register values *
|
|
******************************/
|
|
|
|
/* First register */
|
|
#define TEA5767_MUTE 0x80 /* Mutes output */
|
|
#define TEA5767_SEARCH 0x40 /* Activates station search */
|
|
/* Bits 0-5 for divider MSB */
|
|
|
|
/* Second register */
|
|
/* Bits 0-7 for divider LSB */
|
|
|
|
/* Third register */
|
|
|
|
/* Station search from botton to up */
|
|
#define TEA5767_SEARCH_UP 0x80
|
|
|
|
/* Searches with ADC output = 10 */
|
|
#define TEA5767_SRCH_HIGH_LVL 0x60
|
|
|
|
/* Searches with ADC output = 10 */
|
|
#define TEA5767_SRCH_MID_LVL 0x40
|
|
|
|
/* Searches with ADC output = 5 */
|
|
#define TEA5767_SRCH_LOW_LVL 0x20
|
|
|
|
/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
|
|
#define TEA5767_HIGH_LO_INJECT 0x10
|
|
|
|
/* Disable stereo */
|
|
#define TEA5767_MONO 0x08
|
|
|
|
/* Disable right channel and turns to mono */
|
|
#define TEA5767_MUTE_RIGHT 0x04
|
|
|
|
/* Disable left channel and turns to mono */
|
|
#define TEA5767_MUTE_LEFT 0x02
|
|
|
|
#define TEA5767_PORT1_HIGH 0x01
|
|
|
|
/* Fourth register */
|
|
#define TEA5767_PORT2_HIGH 0x80
|
|
/* Chips stops working. Only I2C bus remains on */
|
|
#define TEA5767_STDBY 0x40
|
|
|
|
/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
|
|
#define TEA5767_JAPAN_BAND 0x20
|
|
|
|
/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
|
|
#define TEA5767_XTAL_32768 0x10
|
|
|
|
/* Cuts weak signals */
|
|
#define TEA5767_SOFT_MUTE 0x08
|
|
|
|
/* Activates high cut control */
|
|
#define TEA5767_HIGH_CUT_CTRL 0x04
|
|
|
|
/* Activates stereo noise control */
|
|
#define TEA5767_ST_NOISE_CTL 0x02
|
|
|
|
/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
|
|
#define TEA5767_SRCH_IND 0x01
|
|
|
|
/* Fifth register */
|
|
|
|
/* By activating, it will use Xtal at 13 MHz as reference for divider */
|
|
#define TEA5767_PLLREF_ENABLE 0x80
|
|
|
|
/* By activating, deemphasis=50, or else, deemphasis of 50us */
|
|
#define TEA5767_DEEMPH_75 0X40
|
|
|
|
/*****************************
|
|
* Read mode register values *
|
|
*****************************/
|
|
|
|
/* First register */
|
|
#define TEA5767_READY_FLAG_MASK 0x80
|
|
#define TEA5767_BAND_LIMIT_MASK 0X40
|
|
/* Bits 0-5 for divider MSB after search or preset */
|
|
|
|
/* Second register */
|
|
/* Bits 0-7 for divider LSB after search or preset */
|
|
|
|
/* Third register */
|
|
#define TEA5767_STEREO_MASK 0x80
|
|
#define TEA5767_IF_CNTR_MASK 0x7f
|
|
|
|
/* Fourth register */
|
|
#define TEA5767_ADC_LEVEL_MASK 0xf0
|
|
|
|
/* should be 0 */
|
|
#define TEA5767_CHIP_ID_MASK 0x0f
|
|
|
|
/* Fifth register */
|
|
/* Reserved for future extensions */
|
|
#define TEA5767_RESERVED_MASK 0xff
|
|
|
|
/*****************************************************************************/
|
|
|
|
static void tea5767_status_dump(struct tea5767_priv *priv,
|
|
unsigned char *buffer)
|
|
{
|
|
unsigned int div, frq;
|
|
|
|
if (TEA5767_READY_FLAG_MASK & buffer[0])
|
|
tuner_info("Ready Flag ON\n");
|
|
else
|
|
tuner_info("Ready Flag OFF\n");
|
|
|
|
if (TEA5767_BAND_LIMIT_MASK & buffer[0])
|
|
tuner_info("Tuner at band limit\n");
|
|
else
|
|
tuner_info("Tuner not at band limit\n");
|
|
|
|
div = ((buffer[0] & 0x3f) << 8) | buffer[1];
|
|
|
|
switch (priv->ctrl.xtal_freq) {
|
|
case TEA5767_HIGH_LO_13MHz:
|
|
frq = (div * 50000 - 700000 - 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
case TEA5767_LOW_LO_13MHz:
|
|
frq = (div * 50000 + 700000 + 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
case TEA5767_LOW_LO_32768:
|
|
frq = (div * 32768 + 700000 + 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
case TEA5767_HIGH_LO_32768:
|
|
default:
|
|
frq = (div * 32768 - 700000 - 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
}
|
|
buffer[0] = (div >> 8) & 0x3f;
|
|
buffer[1] = div & 0xff;
|
|
|
|
tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n",
|
|
frq / 1000, frq % 1000, div);
|
|
|
|
if (TEA5767_STEREO_MASK & buffer[2])
|
|
tuner_info("Stereo\n");
|
|
else
|
|
tuner_info("Mono\n");
|
|
|
|
tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK);
|
|
|
|
tuner_info("ADC Level = %d\n",
|
|
(buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);
|
|
|
|
tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK));
|
|
|
|
tuner_info("Reserved = 0x%02x\n",
|
|
(buffer[4] & TEA5767_RESERVED_MASK));
|
|
}
|
|
|
|
/* Freq should be specifyed at 62.5 Hz */
|
|
static int set_radio_freq(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct tea5767_priv *priv = fe->tuner_priv;
|
|
unsigned int frq = params->frequency;
|
|
unsigned char buffer[5];
|
|
unsigned div;
|
|
int rc;
|
|
|
|
tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);
|
|
|
|
buffer[2] = 0;
|
|
|
|
if (priv->ctrl.port1)
|
|
buffer[2] |= TEA5767_PORT1_HIGH;
|
|
|
|
if (params->audmode == V4L2_TUNER_MODE_MONO) {
|
|
tuner_dbg("TEA5767 set to mono\n");
|
|
buffer[2] |= TEA5767_MONO;
|
|
} else {
|
|
tuner_dbg("TEA5767 set to stereo\n");
|
|
}
|
|
|
|
|
|
buffer[3] = 0;
|
|
|
|
if (priv->ctrl.port2)
|
|
buffer[3] |= TEA5767_PORT2_HIGH;
|
|
|
|
if (priv->ctrl.high_cut)
|
|
buffer[3] |= TEA5767_HIGH_CUT_CTRL;
|
|
|
|
if (priv->ctrl.st_noise)
|
|
buffer[3] |= TEA5767_ST_NOISE_CTL;
|
|
|
|
if (priv->ctrl.soft_mute)
|
|
buffer[3] |= TEA5767_SOFT_MUTE;
|
|
|
|
if (priv->ctrl.japan_band)
|
|
buffer[3] |= TEA5767_JAPAN_BAND;
|
|
|
|
buffer[4] = 0;
|
|
|
|
if (priv->ctrl.deemph_75)
|
|
buffer[4] |= TEA5767_DEEMPH_75;
|
|
|
|
if (priv->ctrl.pllref)
|
|
buffer[4] |= TEA5767_PLLREF_ENABLE;
|
|
|
|
|
|
/* Rounds freq to next decimal value - for 62.5 KHz step */
|
|
/* frq = 20*(frq/16)+radio_frq[frq%16]; */
|
|
|
|
switch (priv->ctrl.xtal_freq) {
|
|
case TEA5767_HIGH_LO_13MHz:
|
|
tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n");
|
|
buffer[2] |= TEA5767_HIGH_LO_INJECT;
|
|
div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;
|
|
break;
|
|
case TEA5767_LOW_LO_13MHz:
|
|
tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n");
|
|
|
|
div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;
|
|
break;
|
|
case TEA5767_LOW_LO_32768:
|
|
tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n");
|
|
buffer[3] |= TEA5767_XTAL_32768;
|
|
/* const 700=4000*175 Khz - to adjust freq to right value */
|
|
div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15;
|
|
break;
|
|
case TEA5767_HIGH_LO_32768:
|
|
default:
|
|
tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n");
|
|
|
|
buffer[2] |= TEA5767_HIGH_LO_INJECT;
|
|
buffer[3] |= TEA5767_XTAL_32768;
|
|
div = ((frq * (4000 / 16) + 700000 + 225000) + 16384) >> 15;
|
|
break;
|
|
}
|
|
buffer[0] = (div >> 8) & 0x3f;
|
|
buffer[1] = div & 0xff;
|
|
|
|
if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
|
|
if (debug) {
|
|
if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
else
|
|
tea5767_status_dump(priv, buffer);
|
|
}
|
|
|
|
priv->frequency = frq * 125 / 2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tea5767_read_status(struct dvb_frontend *fe, char *buffer)
|
|
{
|
|
struct tea5767_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
|
|
memset(buffer, 0, 5);
|
|
if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) {
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int tea5767_signal(struct dvb_frontend *fe, const char *buffer)
|
|
{
|
|
struct tea5767_priv *priv = fe->tuner_priv;
|
|
|
|
int signal = ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8);
|
|
|
|
tuner_dbg("Signal strength: %d\n", signal);
|
|
|
|
return signal;
|
|
}
|
|
|
|
static inline int tea5767_stereo(struct dvb_frontend *fe, const char *buffer)
|
|
{
|
|
struct tea5767_priv *priv = fe->tuner_priv;
|
|
|
|
int stereo = buffer[2] & TEA5767_STEREO_MASK;
|
|
|
|
tuner_dbg("Radio ST GET = %02x\n", stereo);
|
|
|
|
return (stereo ? V4L2_TUNER_SUB_STEREO : 0);
|
|
}
|
|
|
|
static int tea5767_get_status(struct dvb_frontend *fe, u32 *status)
|
|
{
|
|
unsigned char buffer[5];
|
|
|
|
*status = 0;
|
|
|
|
if (0 == tea5767_read_status(fe, buffer)) {
|
|
if (tea5767_signal(fe, buffer))
|
|
*status = TUNER_STATUS_LOCKED;
|
|
if (tea5767_stereo(fe, buffer))
|
|
*status |= TUNER_STATUS_STEREO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tea5767_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
unsigned char buffer[5];
|
|
|
|
*strength = 0;
|
|
|
|
if (0 == tea5767_read_status(fe, buffer))
|
|
*strength = tea5767_signal(fe, buffer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tea5767_standby(struct dvb_frontend *fe)
|
|
{
|
|
unsigned char buffer[5];
|
|
struct tea5767_priv *priv = fe->tuner_priv;
|
|
unsigned div, rc;
|
|
|
|
div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */
|
|
buffer[0] = (div >> 8) & 0x3f;
|
|
buffer[1] = div & 0xff;
|
|
buffer[2] = TEA5767_PORT1_HIGH;
|
|
buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
|
|
TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY;
|
|
buffer[4] = 0;
|
|
|
|
if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)
|
|
{
|
|
struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr };
|
|
unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
|
|
int rc;
|
|
|
|
if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) {
|
|
printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If all bytes are the same then it's a TV tuner and not a tea5767 */
|
|
if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
|
|
buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
|
|
printk(KERN_WARNING "All bytes are equal. It is not a TEA5767\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Status bytes:
|
|
* Byte 4: bit 3:1 : CI (Chip Identification) == 0
|
|
* bit 0 : internally set to 0
|
|
* Byte 5: bit 7:0 : == 0
|
|
*/
|
|
if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {
|
|
printk(KERN_WARNING "Chip ID is not zero. It is not a TEA5767\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tea5767_release(struct dvb_frontend *fe)
|
|
{
|
|
kfree(fe->tuner_priv);
|
|
fe->tuner_priv = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct tea5767_priv *priv = fe->tuner_priv;
|
|
*frequency = priv->frequency;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tea5767_set_config (struct dvb_frontend *fe, void *priv_cfg)
|
|
{
|
|
struct tea5767_priv *priv = fe->tuner_priv;
|
|
|
|
memcpy(&priv->ctrl, priv_cfg, sizeof(priv->ctrl));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_tuner_ops tea5767_tuner_ops = {
|
|
.info = {
|
|
.name = "tea5767", // Philips TEA5767HN FM Radio
|
|
},
|
|
|
|
.set_analog_params = set_radio_freq,
|
|
.set_config = tea5767_set_config,
|
|
.sleep = tea5767_standby,
|
|
.release = tea5767_release,
|
|
.get_frequency = tea5767_get_frequency,
|
|
.get_status = tea5767_get_status,
|
|
.get_rf_strength = tea5767_get_rf_strength,
|
|
};
|
|
|
|
struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter* i2c_adap,
|
|
u8 i2c_addr)
|
|
{
|
|
struct tea5767_priv *priv = NULL;
|
|
|
|
priv = kzalloc(sizeof(struct tea5767_priv), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
return NULL;
|
|
fe->tuner_priv = priv;
|
|
|
|
priv->i2c_props.addr = i2c_addr;
|
|
priv->i2c_props.adap = i2c_adap;
|
|
priv->i2c_props.name = "tea5767";
|
|
|
|
priv->ctrl.xtal_freq = TEA5767_HIGH_LO_32768;
|
|
priv->ctrl.port1 = 1;
|
|
priv->ctrl.port2 = 1;
|
|
priv->ctrl.high_cut = 1;
|
|
priv->ctrl.st_noise = 1;
|
|
priv->ctrl.japan_band = 1;
|
|
|
|
memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio");
|
|
|
|
return fe;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(tea5767_attach);
|
|
EXPORT_SYMBOL_GPL(tea5767_autodetection);
|
|
|
|
MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver");
|
|
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
|
|
MODULE_LICENSE("GPL");
|