mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:26:42 +07:00
31564cbd77
Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...
399 lines
10 KiB
C
399 lines
10 KiB
C
/*
|
|
* TI Touch Screen driver
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/input.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/input/ti_am335x_tsc.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/mfd/ti_am335x_tscadc.h>
|
|
|
|
#define ADCFSM_STEPID 0x10
|
|
#define SEQ_SETTLE 275
|
|
#define MAX_12BIT ((1 << 12) - 1)
|
|
|
|
struct titsc {
|
|
struct input_dev *input;
|
|
struct ti_tscadc_dev *mfd_tscadc;
|
|
unsigned int irq;
|
|
unsigned int wires;
|
|
unsigned int x_plate_resistance;
|
|
bool pen_down;
|
|
int steps_to_configure;
|
|
};
|
|
|
|
static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
|
|
{
|
|
return readl(ts->mfd_tscadc->tscadc_base + reg);
|
|
}
|
|
|
|
static void titsc_writel(struct titsc *tsc, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
writel(val, tsc->mfd_tscadc->tscadc_base + reg);
|
|
}
|
|
|
|
static void titsc_step_config(struct titsc *ts_dev)
|
|
{
|
|
unsigned int config;
|
|
int i, total_steps;
|
|
|
|
/* Configure the Step registers */
|
|
total_steps = 2 * ts_dev->steps_to_configure;
|
|
|
|
config = STEPCONFIG_MODE_HWSYNC |
|
|
STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
|
|
switch (ts_dev->wires) {
|
|
case 4:
|
|
config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
|
|
break;
|
|
case 5:
|
|
config |= STEPCONFIG_YNN |
|
|
STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
|
|
STEPCONFIG_YPP;
|
|
break;
|
|
case 8:
|
|
config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
|
|
break;
|
|
}
|
|
|
|
for (i = 1; i <= ts_dev->steps_to_configure; i++) {
|
|
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
|
|
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
|
|
}
|
|
|
|
config = 0;
|
|
config = STEPCONFIG_MODE_HWSYNC |
|
|
STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
|
|
STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
|
|
switch (ts_dev->wires) {
|
|
case 4:
|
|
config |= STEPCONFIG_YPP;
|
|
break;
|
|
case 5:
|
|
config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
|
|
STEPCONFIG_XNP | STEPCONFIG_YPN;
|
|
break;
|
|
case 8:
|
|
config |= STEPCONFIG_YPP;
|
|
break;
|
|
}
|
|
|
|
for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
|
|
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
|
|
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
|
|
}
|
|
|
|
config = 0;
|
|
/* Charge step configuration */
|
|
config = STEPCONFIG_XPP | STEPCONFIG_YNN |
|
|
STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
|
|
STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
|
|
|
|
titsc_writel(ts_dev, REG_CHARGECONFIG, config);
|
|
titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
|
|
|
|
config = 0;
|
|
/* Configure to calculate pressure */
|
|
config = STEPCONFIG_MODE_HWSYNC |
|
|
STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
|
|
STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
|
|
titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
|
|
titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
|
|
STEPCONFIG_OPENDLY);
|
|
|
|
config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
|
|
titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
|
|
titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
|
|
STEPCONFIG_OPENDLY);
|
|
|
|
titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
|
|
}
|
|
|
|
static void titsc_read_coordinates(struct titsc *ts_dev,
|
|
unsigned int *x, unsigned int *y)
|
|
{
|
|
unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
|
|
unsigned int prev_val_x = ~0, prev_val_y = ~0;
|
|
unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
|
|
unsigned int read, diff;
|
|
unsigned int i, channel;
|
|
|
|
/*
|
|
* Delta filter is used to remove large variations in sampled
|
|
* values from ADC. The filter tries to predict where the next
|
|
* coordinate could be. This is done by taking a previous
|
|
* coordinate and subtracting it form current one. Further the
|
|
* algorithm compares the difference with that of a present value,
|
|
* if true the value is reported to the sub system.
|
|
*/
|
|
for (i = 0; i < fifocount - 1; i++) {
|
|
read = titsc_readl(ts_dev, REG_FIFO0);
|
|
channel = read & 0xf0000;
|
|
channel = channel >> 0x10;
|
|
if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
|
|
read &= 0xfff;
|
|
diff = abs(read - prev_val_x);
|
|
if (diff < prev_diff_x) {
|
|
prev_diff_x = diff;
|
|
*x = read;
|
|
}
|
|
prev_val_x = read;
|
|
}
|
|
|
|
read = titsc_readl(ts_dev, REG_FIFO1);
|
|
channel = read & 0xf0000;
|
|
channel = channel >> 0x10;
|
|
if ((channel >= ts_dev->steps_to_configure) &&
|
|
(channel < (2 * ts_dev->steps_to_configure - 1))) {
|
|
read &= 0xfff;
|
|
diff = abs(read - prev_val_y);
|
|
if (diff < prev_diff_y) {
|
|
prev_diff_y = diff;
|
|
*y = read;
|
|
}
|
|
prev_val_y = read;
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t titsc_irq(int irq, void *dev)
|
|
{
|
|
struct titsc *ts_dev = dev;
|
|
struct input_dev *input_dev = ts_dev->input;
|
|
unsigned int status, irqclr = 0;
|
|
unsigned int x = 0, y = 0;
|
|
unsigned int z1, z2, z;
|
|
unsigned int fsm;
|
|
unsigned int fifo1count, fifo0count;
|
|
int i;
|
|
|
|
status = titsc_readl(ts_dev, REG_IRQSTATUS);
|
|
if (status & IRQENB_FIFO0THRES) {
|
|
titsc_read_coordinates(ts_dev, &x, &y);
|
|
|
|
z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
|
|
z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
|
|
|
|
fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
|
|
for (i = 0; i < fifo1count; i++)
|
|
titsc_readl(ts_dev, REG_FIFO1);
|
|
|
|
fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
|
|
for (i = 0; i < fifo0count; i++)
|
|
titsc_readl(ts_dev, REG_FIFO0);
|
|
|
|
if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
|
|
/*
|
|
* Calculate pressure using formula
|
|
* Resistance(touch) = x plate resistance *
|
|
* x postion/4096 * ((z2 / z1) - 1)
|
|
*/
|
|
z = z2 - z1;
|
|
z *= x;
|
|
z *= ts_dev->x_plate_resistance;
|
|
z /= z1;
|
|
z = (z + 2047) >> 12;
|
|
|
|
if (z <= MAX_12BIT) {
|
|
input_report_abs(input_dev, ABS_X, x);
|
|
input_report_abs(input_dev, ABS_Y, y);
|
|
input_report_abs(input_dev, ABS_PRESSURE, z);
|
|
input_report_key(input_dev, BTN_TOUCH, 1);
|
|
input_sync(input_dev);
|
|
}
|
|
}
|
|
irqclr |= IRQENB_FIFO0THRES;
|
|
}
|
|
|
|
/*
|
|
* Time for sequencer to settle, to read
|
|
* correct state of the sequencer.
|
|
*/
|
|
udelay(SEQ_SETTLE);
|
|
|
|
status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
|
|
if (status & IRQENB_PENUP) {
|
|
/* Pen up event */
|
|
fsm = titsc_readl(ts_dev, REG_ADCFSM);
|
|
if (fsm == ADCFSM_STEPID) {
|
|
ts_dev->pen_down = false;
|
|
input_report_key(input_dev, BTN_TOUCH, 0);
|
|
input_report_abs(input_dev, ABS_PRESSURE, 0);
|
|
input_sync(input_dev);
|
|
} else {
|
|
ts_dev->pen_down = true;
|
|
}
|
|
irqclr |= IRQENB_PENUP;
|
|
}
|
|
|
|
titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
|
|
|
|
titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* The functions for inserting/removing driver as a module.
|
|
*/
|
|
|
|
static int titsc_probe(struct platform_device *pdev)
|
|
{
|
|
struct titsc *ts_dev;
|
|
struct input_dev *input_dev;
|
|
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
|
|
struct mfd_tscadc_board *pdata;
|
|
int err;
|
|
|
|
pdata = tscadc_dev->dev->platform_data;
|
|
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "Could not find platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Allocate memory for device */
|
|
ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!ts_dev || !input_dev) {
|
|
dev_err(&pdev->dev, "failed to allocate memory.\n");
|
|
err = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
tscadc_dev->tsc = ts_dev;
|
|
ts_dev->mfd_tscadc = tscadc_dev;
|
|
ts_dev->input = input_dev;
|
|
ts_dev->irq = tscadc_dev->irq;
|
|
ts_dev->wires = pdata->tsc_init->wires;
|
|
ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
|
|
ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
|
|
|
|
err = request_irq(ts_dev->irq, titsc_irq,
|
|
0, pdev->dev.driver->name, ts_dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to allocate irq.\n");
|
|
goto err_free_mem;
|
|
}
|
|
|
|
titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
|
|
titsc_step_config(ts_dev);
|
|
titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
|
|
|
|
input_dev->name = "ti-tsc";
|
|
input_dev->dev.parent = &pdev->dev;
|
|
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
|
|
|
|
/* register to the input system */
|
|
err = input_register_device(input_dev);
|
|
if (err)
|
|
goto err_free_irq;
|
|
|
|
platform_set_drvdata(pdev, ts_dev);
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(ts_dev->irq, ts_dev);
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
kfree(ts_dev);
|
|
return err;
|
|
}
|
|
|
|
static int titsc_remove(struct platform_device *pdev)
|
|
{
|
|
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
|
|
struct titsc *ts_dev = tscadc_dev->tsc;
|
|
|
|
free_irq(ts_dev->irq, ts_dev);
|
|
|
|
input_unregister_device(ts_dev->input);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(ts_dev);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int titsc_suspend(struct device *dev)
|
|
{
|
|
struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
|
|
struct titsc *ts_dev = tscadc_dev->tsc;
|
|
unsigned int idle;
|
|
|
|
if (device_may_wakeup(tscadc_dev->dev)) {
|
|
idle = titsc_readl(ts_dev, REG_IRQENABLE);
|
|
titsc_writel(ts_dev, REG_IRQENABLE,
|
|
(idle | IRQENB_HW_PEN));
|
|
titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int titsc_resume(struct device *dev)
|
|
{
|
|
struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
|
|
struct titsc *ts_dev = tscadc_dev->tsc;
|
|
|
|
if (device_may_wakeup(tscadc_dev->dev)) {
|
|
titsc_writel(ts_dev, REG_IRQWAKEUP,
|
|
0x00);
|
|
titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
|
|
}
|
|
titsc_step_config(ts_dev);
|
|
titsc_writel(ts_dev, REG_FIFO0THR,
|
|
ts_dev->steps_to_configure);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops titsc_pm_ops = {
|
|
.suspend = titsc_suspend,
|
|
.resume = titsc_resume,
|
|
};
|
|
#define TITSC_PM_OPS (&titsc_pm_ops)
|
|
#else
|
|
#define TITSC_PM_OPS NULL
|
|
#endif
|
|
|
|
static struct platform_driver ti_tsc_driver = {
|
|
.probe = titsc_probe,
|
|
.remove = titsc_remove,
|
|
.driver = {
|
|
.name = "tsc",
|
|
.owner = THIS_MODULE,
|
|
.pm = TITSC_PM_OPS,
|
|
},
|
|
};
|
|
module_platform_driver(ti_tsc_driver);
|
|
|
|
MODULE_DESCRIPTION("TI touchscreen controller driver");
|
|
MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
|
|
MODULE_LICENSE("GPL");
|