AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 21:29:49 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
5c27b9fafe
linux_dsm_epyc7002/arch/m68k/include/asm/sun3_pgtable.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

218 lines
7.7 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _SUN3_PGTABLE_H
#define _SUN3_PGTABLE_H
#include <asm/sun3mmu.h>
#ifndef __ASSEMBLY__
#include <asm/virtconvert.h>
#include <linux/linkage.h>
/*
* This file contains all the things which change drastically for the sun3
* pagetable stuff, to avoid making too much of a mess of the generic m68k
* `pgtable.h'; this should only be included from the generic file. --m
*/
/* For virtual address to physical address conversion */
#define VTOP(addr) __pa(addr)
#define PTOV(addr) __va(addr)
#endif /* !__ASSEMBLY__ */
/* These need to be defined for compatibility although the sun3 doesn't use them */
#define _PAGE_NOCACHE030 0x040
#define _CACHEMASK040 (~0x060)
#define _PAGE_NOCACHE_S 0x040
/* Page protection values within PTE. */
#define SUN3_PAGE_VALID (0x80000000)
#define SUN3_PAGE_WRITEABLE (0x40000000)
#define SUN3_PAGE_SYSTEM (0x20000000)
#define SUN3_PAGE_NOCACHE (0x10000000)
#define SUN3_PAGE_ACCESSED (0x02000000)
#define SUN3_PAGE_MODIFIED (0x01000000)
/* Externally used page protection values. */
#define _PAGE_PRESENT (SUN3_PAGE_VALID)
#define _PAGE_ACCESSED (SUN3_PAGE_ACCESSED)
/* Compound page protection values. */
//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix...
// is it just PAGE_KERNEL and PAGE_SHARED?
#define PAGE_NONE __pgprot(SUN3_PAGE_VALID \
| SUN3_PAGE_ACCESSED \
| SUN3_PAGE_NOCACHE)
#define PAGE_SHARED __pgprot(SUN3_PAGE_VALID \
| SUN3_PAGE_WRITEABLE \
| SUN3_PAGE_ACCESSED \
| SUN3_PAGE_NOCACHE)
#define PAGE_COPY __pgprot(SUN3_PAGE_VALID \
| SUN3_PAGE_ACCESSED \
| SUN3_PAGE_NOCACHE)
#define PAGE_READONLY __pgprot(SUN3_PAGE_VALID \
| SUN3_PAGE_ACCESSED \
| SUN3_PAGE_NOCACHE)
#define PAGE_KERNEL __pgprot(SUN3_PAGE_VALID \
| SUN3_PAGE_WRITEABLE \
| SUN3_PAGE_SYSTEM \
| SUN3_PAGE_NOCACHE \
| SUN3_PAGE_ACCESSED \
| SUN3_PAGE_MODIFIED)
#define PAGE_INIT __pgprot(SUN3_PAGE_VALID \
| SUN3_PAGE_WRITEABLE \
| SUN3_PAGE_SYSTEM \
| SUN3_PAGE_NOCACHE)
/*
* Page protections for initialising protection_map. The sun3 has only two
* protection settings, valid (implying read and execute) and writeable. These
* are as close as we can get...
*/
#define __P000 PAGE_NONE
#define __P001 PAGE_READONLY
#define __P010 PAGE_COPY
#define __P011 PAGE_COPY
#define __P100 PAGE_READONLY
#define __P101 PAGE_READONLY
#define __P110 PAGE_COPY
#define __P111 PAGE_COPY
#define __S000 PAGE_NONE
#define __S001 PAGE_READONLY
#define __S010 PAGE_SHARED
#define __S011 PAGE_SHARED
#define __S100 PAGE_READONLY
#define __S101 PAGE_READONLY
#define __S110 PAGE_SHARED
#define __S111 PAGE_SHARED
/* Use these fake page-protections on PMDs. */
#define SUN3_PMD_VALID (0x00000001)
#define SUN3_PMD_MASK (0x0000003F)
#define SUN3_PMD_MAGIC (0x0000002B)
#ifndef __ASSEMBLY__
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot);
return pte;
}
#define pmd_set(pmdp,ptep) do {} while (0)
static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
{
pgd_val(*pgdp) = virt_to_phys(pmdp);
}
#define __pte_page(pte) \
((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT))
#define __pmd_page(pmd) \
((unsigned long) __va (pmd_val (pmd) & PAGE_MASK))
static inline int pte_none (pte_t pte) { return !pte_val (pte); }
static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; }
static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
pte_val (*ptep) = 0;
}
#define pte_pfn(pte) (pte_val(pte) & SUN3_PAGE_PGNUM_MASK)
#define pfn_pte(pfn, pgprot) \
({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; })
#define pte_page(pte) virt_to_page(__pte_page(pte))
#define pmd_page(pmd) virt_to_page(__pmd_page(pmd))
static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); }
#define pmd_none(pmd) pmd_none2(&(pmd))
//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; }
static inline int pmd_bad2 (pmd_t *pmd) { return 0; }
#define pmd_bad(pmd) pmd_bad2(&(pmd))
static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; }
/* #define pmd_present(pmd) pmd_present2(&(pmd)) */
#define pmd_present(pmd) (!pmd_none2(&(pmd)))
static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; }
static inline int pgd_none (pgd_t pgd) { return 0; }
static inline int pgd_bad (pgd_t pgd) { return 0; }
static inline int pgd_present (pgd_t pgd) { return 1; }
static inline void pgd_clear (pgd_t *pgdp) {}
#define pte_ERROR(e) \
pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
#define pmd_ERROR(e) \
pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
#define pgd_ERROR(e) \
pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
/*
* The following only work if pte_present() is true.
* Undefined behaviour if not...
* [we have the full set here even if they don't change from m68k]
*/
static inline int pte_write(pte_t pte) { return pte_val(pte) & SUN3_PAGE_WRITEABLE; }
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & SUN3_PAGE_MODIFIED; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; }
static inline int pte_special(pte_t pte) { return 0; }
static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; }
static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; }
static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; }
static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; }
static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; }
static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; }
static inline pte_t pte_mknocache(pte_t pte) { pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; }
// use this version when caches work...
//static inline pte_t pte_mkcache(pte_t pte) { pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; }
// until then, use:
static inline pte_t pte_mkcache(pte_t pte) { return pte; }
static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
/* Find an entry in a pagetable directory. */
#define pgd_index(address) ((address) >> PGDIR_SHIFT)
#define pgd_offset(mm, address) \
((mm)->pgd + pgd_index(address))
/* Find an entry in a kernel pagetable directory. */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
/* Find an entry in the second-level pagetable. */
static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address)
{
return (pmd_t *) pgd;
}
/* Find an entry in the third-level pagetable. */
#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address))
#define pte_offset_map(pmd, address) ((pte_t *)page_address(pmd_page(*pmd)) + pte_index(address))
#define pte_unmap(pte) do { } while (0)
/* Macros to (de)construct the fake PTEs representing swap pages. */
#define __swp_type(x) ((x).val & 0x7F)
#define __swp_offset(x) (((x).val) >> 7)
#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
#endif /* !__ASSEMBLY__ */
#endif /* !_SUN3_PGTABLE_H */
Reference in New Issue View Git Blame Copy Permalink