mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
2eaa790989
Use a single common table of struct earlycon_id for both command line and devicetree. Re-define OF_EARLYCON_DECLARE() macro to instance a unique earlycon declaration (the declaration is only guaranteed to be unique within a compilation unit; separate compilation units must still use unique earlycon names). The semantics of OF_EARLYCON_DECLARE() is different; it declares an earlycon which can matched either on the command line or by devicetree. EARLYCON_DECLARE() is semantically unchanged; it declares an earlycon which is matched by command line only. Remove redundant instances of EARLYCON_DECLARE(). This enables all earlycons to properly initialize struct console with the appropriate name and index, which improves diagnostics and enables direct earlycon-to-console handoff. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
687 lines
17 KiB
C
687 lines
17 KiB
C
/*
|
|
* ARC On-Chip(fpga) UART Driver
|
|
*
|
|
* Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* vineetg: July 10th 2012
|
|
* -Decoupled the driver from arch/arc
|
|
* +Using platform_get_resource() for irq/membase (thx to bfin_uart.c)
|
|
* +Using early_platform_xxx() for early console (thx to mach-shmobile/xxx)
|
|
*
|
|
* Vineetg: Aug 21st 2010
|
|
* -Is uart_tx_stopped() not done in tty write path as it has already been
|
|
* taken care of, in serial core
|
|
*
|
|
* Vineetg: Aug 18th 2010
|
|
* -New Serial Core based ARC UART driver
|
|
* -Derived largely from blackfin driver albiet with some major tweaks
|
|
*
|
|
* TODO:
|
|
* -check if sysreq works
|
|
*/
|
|
|
|
#if defined(CONFIG_SERIAL_ARC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_address.h>
|
|
|
|
/*************************************
|
|
* ARC UART Hardware Specs
|
|
************************************/
|
|
#define ARC_UART_TX_FIFO_SIZE 1
|
|
|
|
/*
|
|
* UART Register set (this is not a Standards Compliant IP)
|
|
* Also each reg is Word aligned, but only 8 bits wide
|
|
*/
|
|
#define R_ID0 0
|
|
#define R_ID1 4
|
|
#define R_ID2 8
|
|
#define R_ID3 12
|
|
#define R_DATA 16
|
|
#define R_STS 20
|
|
#define R_BAUDL 24
|
|
#define R_BAUDH 28
|
|
|
|
/* Bits for UART Status Reg (R/W) */
|
|
#define RXIENB 0x04 /* Receive Interrupt Enable */
|
|
#define TXIENB 0x40 /* Transmit Interrupt Enable */
|
|
|
|
#define RXEMPTY 0x20 /* Receive FIFO Empty: No char receivede */
|
|
#define TXEMPTY 0x80 /* Transmit FIFO Empty, thus char can be written into */
|
|
|
|
#define RXFULL 0x08 /* Receive FIFO full */
|
|
#define RXFULL1 0x10 /* Receive FIFO has space for 1 char (tot space=4) */
|
|
|
|
#define RXFERR 0x01 /* Frame Error: Stop Bit not detected */
|
|
#define RXOERR 0x02 /* OverFlow Err: Char recv but RXFULL still set */
|
|
|
|
/* Uart bit fiddling helpers: lowest level */
|
|
#define RBASE(port, reg) (port->membase + reg)
|
|
#define UART_REG_SET(u, r, v) writeb((v), RBASE(u, r))
|
|
#define UART_REG_GET(u, r) readb(RBASE(u, r))
|
|
|
|
#define UART_REG_OR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) | (v))
|
|
#define UART_REG_CLR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) & ~(v))
|
|
|
|
/* Uart bit fiddling helpers: API level */
|
|
#define UART_SET_DATA(uart, val) UART_REG_SET(uart, R_DATA, val)
|
|
#define UART_GET_DATA(uart) UART_REG_GET(uart, R_DATA)
|
|
|
|
#define UART_SET_BAUDH(uart, val) UART_REG_SET(uart, R_BAUDH, val)
|
|
#define UART_SET_BAUDL(uart, val) UART_REG_SET(uart, R_BAUDL, val)
|
|
|
|
#define UART_CLR_STATUS(uart, val) UART_REG_CLR(uart, R_STS, val)
|
|
#define UART_GET_STATUS(uart) UART_REG_GET(uart, R_STS)
|
|
|
|
#define UART_ALL_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB|TXIENB)
|
|
#define UART_RX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB)
|
|
#define UART_TX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, TXIENB)
|
|
|
|
#define UART_ALL_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB|TXIENB)
|
|
#define UART_RX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB)
|
|
#define UART_TX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, TXIENB)
|
|
|
|
#define ARC_SERIAL_DEV_NAME "ttyARC"
|
|
|
|
struct arc_uart_port {
|
|
struct uart_port port;
|
|
unsigned long baud;
|
|
};
|
|
|
|
#define to_arc_port(uport) container_of(uport, struct arc_uart_port, port)
|
|
|
|
static struct arc_uart_port arc_uart_ports[CONFIG_SERIAL_ARC_NR_PORTS];
|
|
|
|
#ifdef CONFIG_SERIAL_ARC_CONSOLE
|
|
static struct console arc_console;
|
|
#endif
|
|
|
|
#define DRIVER_NAME "arc-uart"
|
|
|
|
static struct uart_driver arc_uart_driver = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = DRIVER_NAME,
|
|
.dev_name = ARC_SERIAL_DEV_NAME,
|
|
.major = 0,
|
|
.minor = 0,
|
|
.nr = CONFIG_SERIAL_ARC_NR_PORTS,
|
|
#ifdef CONFIG_SERIAL_ARC_CONSOLE
|
|
.cons = &arc_console,
|
|
#endif
|
|
};
|
|
|
|
static void arc_serial_stop_rx(struct uart_port *port)
|
|
{
|
|
UART_RX_IRQ_DISABLE(port);
|
|
}
|
|
|
|
static void arc_serial_stop_tx(struct uart_port *port)
|
|
{
|
|
while (!(UART_GET_STATUS(port) & TXEMPTY))
|
|
cpu_relax();
|
|
|
|
UART_TX_IRQ_DISABLE(port);
|
|
}
|
|
|
|
/*
|
|
* Return TIOCSER_TEMT when transmitter is not busy.
|
|
*/
|
|
static unsigned int arc_serial_tx_empty(struct uart_port *port)
|
|
{
|
|
unsigned int stat;
|
|
|
|
stat = UART_GET_STATUS(port);
|
|
if (stat & TXEMPTY)
|
|
return TIOCSER_TEMT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Driver internal routine, used by both tty(serial core) as well as tx-isr
|
|
* -Called under spinlock in either cases
|
|
* -also tty->stopped has already been checked
|
|
* = by uart_start( ) before calling us
|
|
* = tx_ist checks that too before calling
|
|
*/
|
|
static void arc_serial_tx_chars(struct uart_port *port)
|
|
{
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
int sent = 0;
|
|
unsigned char ch;
|
|
|
|
if (unlikely(port->x_char)) {
|
|
UART_SET_DATA(port, port->x_char);
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
sent = 1;
|
|
} else if (!uart_circ_empty(xmit)) {
|
|
ch = xmit->buf[xmit->tail];
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
while (!(UART_GET_STATUS(port) & TXEMPTY))
|
|
cpu_relax();
|
|
UART_SET_DATA(port, ch);
|
|
sent = 1;
|
|
}
|
|
|
|
/*
|
|
* If num chars in xmit buffer are too few, ask tty layer for more.
|
|
* By Hard ISR to schedule processing in software interrupt part
|
|
*/
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
|
|
if (sent)
|
|
UART_TX_IRQ_ENABLE(port);
|
|
}
|
|
|
|
/*
|
|
* port is locked and interrupts are disabled
|
|
* uart_start( ) calls us under the port spinlock irqsave
|
|
*/
|
|
static void arc_serial_start_tx(struct uart_port *port)
|
|
{
|
|
arc_serial_tx_chars(port);
|
|
}
|
|
|
|
static void arc_serial_rx_chars(struct uart_port *port, unsigned int status)
|
|
{
|
|
unsigned int ch, flg = 0;
|
|
|
|
/*
|
|
* UART has 4 deep RX-FIFO. Driver's recongnition of this fact
|
|
* is very subtle. Here's how ...
|
|
* Upon getting a RX-Intr, such that RX-EMPTY=0, meaning data available,
|
|
* driver reads the DATA Reg and keeps doing that in a loop, until
|
|
* RX-EMPTY=1. Multiple chars being avail, with a single Interrupt,
|
|
* before RX-EMPTY=0, implies some sort of buffering going on in the
|
|
* controller, which is indeed the Rx-FIFO.
|
|
*/
|
|
do {
|
|
/*
|
|
* This could be an Rx Intr for err (no data),
|
|
* so check err and clear that Intr first
|
|
*/
|
|
if (unlikely(status & (RXOERR | RXFERR))) {
|
|
if (status & RXOERR) {
|
|
port->icount.overrun++;
|
|
flg = TTY_OVERRUN;
|
|
UART_CLR_STATUS(port, RXOERR);
|
|
}
|
|
|
|
if (status & RXFERR) {
|
|
port->icount.frame++;
|
|
flg = TTY_FRAME;
|
|
UART_CLR_STATUS(port, RXFERR);
|
|
}
|
|
} else
|
|
flg = TTY_NORMAL;
|
|
|
|
if (status & RXEMPTY)
|
|
continue;
|
|
|
|
ch = UART_GET_DATA(port);
|
|
port->icount.rx++;
|
|
|
|
if (!(uart_handle_sysrq_char(port, ch)))
|
|
uart_insert_char(port, status, RXOERR, ch, flg);
|
|
|
|
spin_unlock(&port->lock);
|
|
tty_flip_buffer_push(&port->state->port);
|
|
spin_lock(&port->lock);
|
|
} while (!((status = UART_GET_STATUS(port)) & RXEMPTY));
|
|
}
|
|
|
|
/*
|
|
* A note on the Interrupt handling state machine of this driver
|
|
*
|
|
* kernel printk writes funnel thru the console driver framework and in order
|
|
* to keep things simple as well as efficient, it writes to UART in polled
|
|
* mode, in one shot, and exits.
|
|
*
|
|
* OTOH, Userland output (via tty layer), uses interrupt based writes as there
|
|
* can be undeterministic delay between char writes.
|
|
*
|
|
* Thus Rx-interrupts are always enabled, while tx-interrupts are by default
|
|
* disabled.
|
|
*
|
|
* When tty has some data to send out, serial core calls driver's start_tx
|
|
* which
|
|
* -checks-if-tty-buffer-has-char-to-send
|
|
* -writes-data-to-uart
|
|
* -enable-tx-intr
|
|
*
|
|
* Once data bits are pushed out, controller raises the Tx-room-avail-Interrupt.
|
|
* The first thing Tx ISR does is disable further Tx interrupts (as this could
|
|
* be the last char to send, before settling down into the quiet polled mode).
|
|
* It then calls the exact routine used by tty layer write to send out any
|
|
* more char in tty buffer. In case of sending, it re-enables Tx-intr. In case
|
|
* of no data, it remains disabled.
|
|
* This is how the transmit state machine is dynamically switched on/off
|
|
*/
|
|
|
|
static irqreturn_t arc_serial_isr(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *port = dev_id;
|
|
unsigned int status;
|
|
|
|
status = UART_GET_STATUS(port);
|
|
|
|
/*
|
|
* Single IRQ for both Rx (data available) Tx (room available) Interrupt
|
|
* notifications from the UART Controller.
|
|
* To demultiplex between the two, we check the relevant bits
|
|
*/
|
|
if (status & RXIENB) {
|
|
|
|
/* already in ISR, no need of xx_irqsave */
|
|
spin_lock(&port->lock);
|
|
arc_serial_rx_chars(port, status);
|
|
spin_unlock(&port->lock);
|
|
}
|
|
|
|
if ((status & TXIENB) && (status & TXEMPTY)) {
|
|
|
|
/* Unconditionally disable further Tx-Interrupts.
|
|
* will be enabled by tx_chars() if needed.
|
|
*/
|
|
UART_TX_IRQ_DISABLE(port);
|
|
|
|
spin_lock(&port->lock);
|
|
|
|
if (!uart_tx_stopped(port))
|
|
arc_serial_tx_chars(port);
|
|
|
|
spin_unlock(&port->lock);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int arc_serial_get_mctrl(struct uart_port *port)
|
|
{
|
|
/*
|
|
* Pretend we have a Modem status reg and following bits are
|
|
* always set, to satify the serial core state machine
|
|
* (DSR) Data Set Ready
|
|
* (CTS) Clear To Send
|
|
* (CAR) Carrier Detect
|
|
*/
|
|
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
|
|
}
|
|
|
|
static void arc_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
/* MCR not present */
|
|
}
|
|
|
|
static void arc_serial_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
/* ARC UART doesn't support sending Break signal */
|
|
}
|
|
|
|
static int arc_serial_startup(struct uart_port *port)
|
|
{
|
|
/* Before we hook up the ISR, Disable all UART Interrupts */
|
|
UART_ALL_IRQ_DISABLE(port);
|
|
|
|
if (request_irq(port->irq, arc_serial_isr, 0, "arc uart rx-tx", port)) {
|
|
dev_warn(port->dev, "Unable to attach ARC UART intr\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
UART_RX_IRQ_ENABLE(port); /* Only Rx IRQ enabled to begin with */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This is not really needed */
|
|
static void arc_serial_shutdown(struct uart_port *port)
|
|
{
|
|
free_irq(port->irq, port);
|
|
}
|
|
|
|
static void
|
|
arc_serial_set_termios(struct uart_port *port, struct ktermios *new,
|
|
struct ktermios *old)
|
|
{
|
|
struct arc_uart_port *uart = to_arc_port(port);
|
|
unsigned int baud, uartl, uarth, hw_val;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Use the generic handler so that any specially encoded baud rates
|
|
* such as SPD_xx flags or "%B0" can be handled
|
|
* Max Baud I suppose will not be more than current 115K * 4
|
|
* Formula for ARC UART is: hw-val = ((CLK/(BAUD*4)) -1)
|
|
* spread over two 8-bit registers
|
|
*/
|
|
baud = uart_get_baud_rate(port, new, old, 0, 460800);
|
|
|
|
hw_val = port->uartclk / (uart->baud * 4) - 1;
|
|
uartl = hw_val & 0xFF;
|
|
uarth = (hw_val >> 8) & 0xFF;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
UART_ALL_IRQ_DISABLE(port);
|
|
|
|
UART_SET_BAUDL(port, uartl);
|
|
UART_SET_BAUDH(port, uarth);
|
|
|
|
UART_RX_IRQ_ENABLE(port);
|
|
|
|
/*
|
|
* UART doesn't support Parity/Hardware Flow Control;
|
|
* Only supports 8N1 character size
|
|
*/
|
|
new->c_cflag &= ~(CMSPAR|CRTSCTS|CSIZE);
|
|
new->c_cflag |= CS8;
|
|
|
|
if (old)
|
|
tty_termios_copy_hw(new, old);
|
|
|
|
/* Don't rewrite B0 */
|
|
if (tty_termios_baud_rate(new))
|
|
tty_termios_encode_baud_rate(new, baud, baud);
|
|
|
|
uart_update_timeout(port, new->c_cflag, baud);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static const char *arc_serial_type(struct uart_port *port)
|
|
{
|
|
return port->type == PORT_ARC ? DRIVER_NAME : NULL;
|
|
}
|
|
|
|
static void arc_serial_release_port(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static int arc_serial_request_port(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Verify the new serial_struct (for TIOCSSERIAL).
|
|
*/
|
|
static int
|
|
arc_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
if (port->type != PORT_UNKNOWN && ser->type != PORT_ARC)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure/autoconfigure the port.
|
|
*/
|
|
static void arc_serial_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE)
|
|
port->type = PORT_ARC;
|
|
}
|
|
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
|
|
static void arc_serial_poll_putchar(struct uart_port *port, unsigned char chr)
|
|
{
|
|
while (!(UART_GET_STATUS(port) & TXEMPTY))
|
|
cpu_relax();
|
|
|
|
UART_SET_DATA(port, chr);
|
|
}
|
|
|
|
static int arc_serial_poll_getchar(struct uart_port *port)
|
|
{
|
|
unsigned char chr;
|
|
|
|
while (!(UART_GET_STATUS(port) & RXEMPTY))
|
|
cpu_relax();
|
|
|
|
chr = UART_GET_DATA(port);
|
|
return chr;
|
|
}
|
|
#endif
|
|
|
|
static struct uart_ops arc_serial_pops = {
|
|
.tx_empty = arc_serial_tx_empty,
|
|
.set_mctrl = arc_serial_set_mctrl,
|
|
.get_mctrl = arc_serial_get_mctrl,
|
|
.stop_tx = arc_serial_stop_tx,
|
|
.start_tx = arc_serial_start_tx,
|
|
.stop_rx = arc_serial_stop_rx,
|
|
.break_ctl = arc_serial_break_ctl,
|
|
.startup = arc_serial_startup,
|
|
.shutdown = arc_serial_shutdown,
|
|
.set_termios = arc_serial_set_termios,
|
|
.type = arc_serial_type,
|
|
.release_port = arc_serial_release_port,
|
|
.request_port = arc_serial_request_port,
|
|
.config_port = arc_serial_config_port,
|
|
.verify_port = arc_serial_verify_port,
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
.poll_put_char = arc_serial_poll_putchar,
|
|
.poll_get_char = arc_serial_poll_getchar,
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_SERIAL_ARC_CONSOLE
|
|
|
|
static int arc_serial_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_port *port;
|
|
int baud = 115200;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (co->index < 0 || co->index >= CONFIG_SERIAL_ARC_NR_PORTS)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* The uart port backing the console (e.g. ttyARC1) might not have been
|
|
* init yet. If so, defer the console setup to after the port.
|
|
*/
|
|
port = &arc_uart_ports[co->index].port;
|
|
if (!port->membase)
|
|
return -ENODEV;
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
/*
|
|
* Serial core will call port->ops->set_termios( )
|
|
* which will set the baud reg
|
|
*/
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static void arc_serial_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
while (!(UART_GET_STATUS(port) & TXEMPTY))
|
|
cpu_relax();
|
|
|
|
UART_SET_DATA(port, (unsigned char)ch);
|
|
}
|
|
|
|
/*
|
|
* Interrupts are disabled on entering
|
|
*/
|
|
static void arc_serial_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
struct uart_port *port = &arc_uart_ports[co->index].port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
uart_console_write(port, s, count, arc_serial_console_putchar);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static struct console arc_console = {
|
|
.name = ARC_SERIAL_DEV_NAME,
|
|
.write = arc_serial_console_write,
|
|
.device = uart_console_device,
|
|
.setup = arc_serial_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &arc_uart_driver
|
|
};
|
|
|
|
static __init void arc_early_serial_write(struct console *con, const char *s,
|
|
unsigned int n)
|
|
{
|
|
struct earlycon_device *dev = con->data;
|
|
|
|
uart_console_write(&dev->port, s, n, arc_serial_console_putchar);
|
|
}
|
|
|
|
static int __init arc_early_console_setup(struct earlycon_device *dev,
|
|
const char *opt)
|
|
{
|
|
struct uart_port *port = &dev->port;
|
|
unsigned int l, h, hw_val;
|
|
|
|
if (!dev->port.membase)
|
|
return -ENODEV;
|
|
|
|
hw_val = port->uartclk / (dev->baud * 4) - 1;
|
|
l = hw_val & 0xFF;
|
|
h = (hw_val >> 8) & 0xFF;
|
|
|
|
UART_SET_BAUDL(port, l);
|
|
UART_SET_BAUDH(port, h);
|
|
|
|
dev->con->write = arc_early_serial_write;
|
|
return 0;
|
|
}
|
|
OF_EARLYCON_DECLARE(arc_uart, "snps,arc-uart", arc_early_console_setup);
|
|
|
|
#endif /* CONFIG_SERIAL_ARC_CONSOLE */
|
|
|
|
static int arc_serial_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct arc_uart_port *uart;
|
|
struct uart_port *port;
|
|
int dev_id;
|
|
u32 val;
|
|
|
|
/* no device tree device */
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
dev_id = of_alias_get_id(np, "serial");
|
|
if (dev_id < 0)
|
|
dev_id = 0;
|
|
|
|
uart = &arc_uart_ports[dev_id];
|
|
port = &uart->port;
|
|
|
|
if (of_property_read_u32(np, "clock-frequency", &val)) {
|
|
dev_err(&pdev->dev, "clock-frequency property NOTset\n");
|
|
return -EINVAL;
|
|
}
|
|
port->uartclk = val;
|
|
|
|
if (of_property_read_u32(np, "current-speed", &val)) {
|
|
dev_err(&pdev->dev, "current-speed property NOT set\n");
|
|
return -EINVAL;
|
|
}
|
|
uart->baud = val;
|
|
|
|
port->membase = of_iomap(np, 0);
|
|
if (!port->membase)
|
|
/* No point of dev_err since UART itself is hosed here */
|
|
return -ENXIO;
|
|
|
|
port->irq = irq_of_parse_and_map(np, 0);
|
|
|
|
port->dev = &pdev->dev;
|
|
port->iotype = UPIO_MEM;
|
|
port->flags = UPF_BOOT_AUTOCONF;
|
|
port->line = dev_id;
|
|
port->ops = &arc_serial_pops;
|
|
|
|
port->fifosize = ARC_UART_TX_FIFO_SIZE;
|
|
|
|
/*
|
|
* uart_insert_char( ) uses it in decideding whether to ignore a
|
|
* char or not. Explicitly setting it here, removes the subtelty
|
|
*/
|
|
port->ignore_status_mask = 0;
|
|
|
|
return uart_add_one_port(&arc_uart_driver, &arc_uart_ports[dev_id].port);
|
|
}
|
|
|
|
static int arc_serial_remove(struct platform_device *pdev)
|
|
{
|
|
/* This will never be called */
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id arc_uart_dt_ids[] = {
|
|
{ .compatible = "snps,arc-uart" },
|
|
{ /* Sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, arc_uart_dt_ids);
|
|
|
|
static struct platform_driver arc_platform_driver = {
|
|
.probe = arc_serial_probe,
|
|
.remove = arc_serial_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = arc_uart_dt_ids,
|
|
},
|
|
};
|
|
|
|
static int __init arc_serial_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = uart_register_driver(&arc_uart_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = platform_driver_register(&arc_platform_driver);
|
|
if (ret)
|
|
uart_unregister_driver(&arc_uart_driver);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit arc_serial_exit(void)
|
|
{
|
|
platform_driver_unregister(&arc_platform_driver);
|
|
uart_unregister_driver(&arc_uart_driver);
|
|
}
|
|
|
|
module_init(arc_serial_init);
|
|
module_exit(arc_serial_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
MODULE_AUTHOR("Vineet Gupta");
|
|
MODULE_DESCRIPTION("ARC(Synopsys) On-Chip(fpga) serial driver");
|