mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
51c7b4477c
tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or 12bit, dual-edge (12 lines). Add bus-width to the documentation so it can be used to select between the two connection scheme. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-2-peter.ujfalusi@ti.com
67 lines
1.8 KiB
Plaintext
67 lines
1.8 KiB
Plaintext
TFP410 DPI to DVI encoder
|
|
=========================
|
|
|
|
Required properties:
|
|
- compatible: "ti,tfp410"
|
|
|
|
Optional properties:
|
|
- powerdown-gpios: power-down gpio
|
|
- reg: I2C address. If and only if present the device node should be placed
|
|
into the I2C controller node where the TFP410 I2C is connected to.
|
|
- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured
|
|
through th DK[3:1] pins. This property shall be present only if the TFP410
|
|
is not connected through I2C.
|
|
|
|
Required nodes:
|
|
|
|
This device has two video ports. Their connections are modeled using the OF
|
|
graph bindings specified in [1]. Each port node shall have a single endpoint.
|
|
|
|
- Port 0 is the DPI input port. Its endpoint subnode shall contain a
|
|
pclk-sample and bus-width property and a remote-endpoint property as specified
|
|
in [1].
|
|
- If pclk-sample is not defined, pclk-sample = 0 should be assumed for
|
|
backward compatibility.
|
|
- If bus-width is not defined then bus-width = 24 should be assumed for
|
|
backward compatibility.
|
|
bus-width = 24: 24 data lines are connected and single-edge mode
|
|
bus-width = 12: 12 data lines are connected and dual-edge mode
|
|
|
|
- Port 1 is the DVI output port. Its endpoint subnode shall contain a
|
|
remote-endpoint property is specified in [1].
|
|
|
|
[1] Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
|
|
|
|
Example
|
|
-------
|
|
|
|
tfp410: encoder@0 {
|
|
compatible = "ti,tfp410";
|
|
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
|
|
ti,deskew = <4>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tfp410_in: endpoint@0 {
|
|
pclk-sample = <1>;
|
|
bus-width = <24>;
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tfp410_out: endpoint@0 {
|
|
remote-endpoint = <&dvi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|