mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-19 19:07:32 +07:00
30dd9fb924
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
287 lines
6.5 KiB
Plaintext
287 lines
6.5 KiB
Plaintext
/*
|
|
* Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
|
|
* Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include "imx53.dtsi"
|
|
|
|
/ {
|
|
model = "TQ TQMa53";
|
|
compatible = "tq,tqma53", "fsl,imx53";
|
|
|
|
memory {
|
|
reg = <0x70000000 0x40000000>; /* Up to 1GiB */
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_3p3v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&esdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc2>,
|
|
<&pinctrl_esdhc2_cdwp>;
|
|
vmmc-supply = <®_3p3v>;
|
|
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
|
|
<&gpio3 24 0>, <&gpio3 25 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&esdhc3 { /* EMMC */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc3>;
|
|
vmmc-supply = <®_3p3v>;
|
|
non-removable;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx53-tqma53 {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
|
|
MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */
|
|
MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */
|
|
MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */
|
|
MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */
|
|
MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */
|
|
MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */
|
|
MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */
|
|
MX53_PAD_GPIO_3__GPIO1_3 0x80000000
|
|
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */
|
|
MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */
|
|
>;
|
|
};
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
|
|
MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
|
|
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
|
|
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_can1: can1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
|
|
MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_can2: can2grp {
|
|
fsl,pins = <
|
|
MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
|
|
MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_cspi: cspigrp {
|
|
fsl,pins = <
|
|
MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
|
|
MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5
|
|
MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
|
|
MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
|
|
MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc2: esdhc2grp {
|
|
fsl,pins = <
|
|
MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
|
|
MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
|
|
MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
|
|
MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
|
|
MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
|
|
MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc2_cdwp: esdhc2cdwp {
|
|
fsl,pins = <
|
|
MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
|
|
MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc3: esdhc3grp {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
|
|
MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
|
|
MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
|
|
MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
|
|
MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
|
|
MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
|
|
MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
|
|
MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
|
|
MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
|
|
MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec: fecgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
|
|
MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
|
|
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
|
|
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
|
|
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
|
|
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
|
|
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
|
|
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
|
|
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
|
|
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
|
|
MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
|
|
MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
|
|
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
|
|
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
|
|
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
uart-has-rtscts;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&can2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&cspi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_cspi>;
|
|
cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
|
|
<&gpio1 21 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
pmic: mc34708@8 {
|
|
compatible = "fsl,mc34708";
|
|
reg = <0x8>;
|
|
fsl,mc13xxx-uses-rtc;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <6 4>; /* PATA_DATA6, active high */
|
|
};
|
|
|
|
sensor1: lm75@48 {
|
|
compatible = "lm75";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
eeprom: 24c64@50 {
|
|
compatible = "atmel,24c64";
|
|
pagesize = <32>;
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
phy-mode = "rmii";
|
|
status = "disabled";
|
|
};
|