mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-13 00:16:40 +07:00
c65c4f052b
USB3380 enhanced mode allows GPEP to be used in both IN and OUT directions. However, IN and OUT endpoints must use same USB endpoint address (bEndpointAddress). Fix this by setting the ep_cfg.ep_number during initialization and keep it in net2280_enable() Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
204 lines
7.6 KiB
C
204 lines
7.6 KiB
C
/*
|
|
* USB 338x super/high/full speed USB device controller.
|
|
* Unlike many such controllers, this one talks PCI.
|
|
*
|
|
* Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
|
|
* Copyright (C) 2003 David Brownell
|
|
* Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef __LINUX_USB_USB338X_H
|
|
#define __LINUX_USB_USB338X_H
|
|
|
|
#include <linux/usb/net2280.h>
|
|
|
|
/*
|
|
* Extra defined bits for net2280 registers
|
|
*/
|
|
#define SCRATCH 0x0b
|
|
|
|
#define DEFECT7374_FSM_FIELD 28
|
|
#define SUPER_SPEED 8
|
|
#define DMA_REQUEST_OUTSTANDING 5
|
|
#define DMA_PAUSE_DONE_INTERRUPT 26
|
|
#define SET_ISOCHRONOUS_DELAY 24
|
|
#define SET_SEL 22
|
|
#define SUPER_SPEED_MODE 8
|
|
|
|
/*ep_cfg*/
|
|
#define MAX_BURST_SIZE 24
|
|
#define EP_FIFO_BYTE_COUNT 16
|
|
#define IN_ENDPOINT_ENABLE 14
|
|
#define IN_ENDPOINT_TYPE 12
|
|
#define OUT_ENDPOINT_ENABLE 10
|
|
#define OUT_ENDPOINT_TYPE 8
|
|
#define USB3380_EP_CFG_MASK_IN ((0x3 << IN_ENDPOINT_TYPE) | \
|
|
BIT(IN_ENDPOINT_ENABLE))
|
|
#define USB3380_EP_CFG_MASK_OUT ((0x3 << OUT_ENDPOINT_TYPE) | \
|
|
BIT(OUT_ENDPOINT_ENABLE))
|
|
|
|
struct usb338x_usb_ext_regs {
|
|
u32 usbclass;
|
|
#define DEVICE_PROTOCOL 16
|
|
#define DEVICE_SUB_CLASS 8
|
|
#define DEVICE_CLASS 0
|
|
u32 ss_sel;
|
|
#define U2_SYSTEM_EXIT_LATENCY 8
|
|
#define U1_SYSTEM_EXIT_LATENCY 0
|
|
u32 ss_del;
|
|
#define U2_DEVICE_EXIT_LATENCY 8
|
|
#define U1_DEVICE_EXIT_LATENCY 0
|
|
u32 usb2lpm;
|
|
#define USB_L1_LPM_HIRD 2
|
|
#define USB_L1_LPM_REMOTE_WAKE 1
|
|
#define USB_L1_LPM_SUPPORT 0
|
|
u32 usb3belt;
|
|
#define BELT_MULTIPLIER 10
|
|
#define BEST_EFFORT_LATENCY_TOLERANCE 0
|
|
u32 usbctl2;
|
|
#define LTM_ENABLE 7
|
|
#define U2_ENABLE 6
|
|
#define U1_ENABLE 5
|
|
#define FUNCTION_SUSPEND 4
|
|
#define USB3_CORE_ENABLE 3
|
|
#define USB2_CORE_ENABLE 2
|
|
#define SERIAL_NUMBER_STRING_ENABLE 0
|
|
u32 in_timeout;
|
|
#define GPEP3_TIMEOUT 19
|
|
#define GPEP2_TIMEOUT 18
|
|
#define GPEP1_TIMEOUT 17
|
|
#define GPEP0_TIMEOUT 16
|
|
#define GPEP3_TIMEOUT_VALUE 13
|
|
#define GPEP3_TIMEOUT_ENABLE 12
|
|
#define GPEP2_TIMEOUT_VALUE 9
|
|
#define GPEP2_TIMEOUT_ENABLE 8
|
|
#define GPEP1_TIMEOUT_VALUE 5
|
|
#define GPEP1_TIMEOUT_ENABLE 4
|
|
#define GPEP0_TIMEOUT_VALUE 1
|
|
#define GPEP0_TIMEOUT_ENABLE 0
|
|
u32 isodelay;
|
|
#define ISOCHRONOUS_DELAY 0
|
|
} __packed;
|
|
|
|
struct usb338x_fifo_regs {
|
|
/* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */
|
|
u32 ep_fifo_size_base;
|
|
#define IN_FIFO_BASE_ADDRESS 22
|
|
#define IN_FIFO_SIZE 16
|
|
#define OUT_FIFO_BASE_ADDRESS 6
|
|
#define OUT_FIFO_SIZE 0
|
|
u32 ep_fifo_out_wrptr;
|
|
u32 ep_fifo_out_rdptr;
|
|
u32 ep_fifo_in_wrptr;
|
|
u32 ep_fifo_in_rdptr;
|
|
u32 unused[3];
|
|
} __packed;
|
|
|
|
|
|
/* Link layer */
|
|
struct usb338x_ll_regs {
|
|
/* offset 0x700 */
|
|
u32 ll_ltssm_ctrl1;
|
|
u32 ll_ltssm_ctrl2;
|
|
u32 ll_ltssm_ctrl3;
|
|
u32 unused[2];
|
|
u32 ll_general_ctrl0;
|
|
u32 ll_general_ctrl1;
|
|
#define PM_U3_AUTO_EXIT 29
|
|
#define PM_U2_AUTO_EXIT 28
|
|
#define PM_U1_AUTO_EXIT 27
|
|
#define PM_FORCE_U2_ENTRY 26
|
|
#define PM_FORCE_U1_ENTRY 25
|
|
#define PM_LGO_COLLISION_SEND_LAU 24
|
|
#define PM_DIR_LINK_REJECT 23
|
|
#define PM_FORCE_LINK_ACCEPT 22
|
|
#define PM_DIR_ENTRY_U3 20
|
|
#define PM_DIR_ENTRY_U2 19
|
|
#define PM_DIR_ENTRY_U1 18
|
|
#define PM_U2_ENABLE 17
|
|
#define PM_U1_ENABLE 16
|
|
#define SKP_THRESHOLD_ADJUST_FMW 8
|
|
#define RESEND_DPP_ON_LRTY_FMW 7
|
|
#define DL_BIT_VALUE_FMW 6
|
|
#define FORCE_DL_BIT 5
|
|
u32 ll_general_ctrl2;
|
|
#define SELECT_INVERT_LANE_POLARITY 7
|
|
#define FORCE_INVERT_LANE_POLARITY 6
|
|
u32 ll_general_ctrl3;
|
|
u32 ll_general_ctrl4;
|
|
u32 ll_error_gen;
|
|
} __packed;
|
|
|
|
struct usb338x_ll_lfps_regs {
|
|
/* offset 0x748 */
|
|
u32 ll_lfps_5;
|
|
#define TIMER_LFPS_6US 16
|
|
u32 ll_lfps_6;
|
|
#define TIMER_LFPS_80US 0
|
|
} __packed;
|
|
|
|
struct usb338x_ll_tsn_regs {
|
|
/* offset 0x77C */
|
|
u32 ll_tsn_counters_2;
|
|
#define HOT_TX_NORESET_TS2 24
|
|
u32 ll_tsn_counters_3;
|
|
#define HOT_RX_RESET_TS2 0
|
|
} __packed;
|
|
|
|
struct usb338x_ll_chi_regs {
|
|
/* offset 0x79C */
|
|
u32 ll_tsn_chicken_bit;
|
|
#define RECOVERY_IDLE_TO_RECOVER_FMW 3
|
|
} __packed;
|
|
|
|
/* protocol layer */
|
|
struct usb338x_pl_regs {
|
|
/* offset 0x800 */
|
|
u32 pl_reg_1;
|
|
u32 pl_reg_2;
|
|
u32 pl_reg_3;
|
|
u32 pl_reg_4;
|
|
u32 pl_ep_ctrl;
|
|
/* Protocol Layer Endpoint Control*/
|
|
#define PL_EP_CTRL 0x810
|
|
#define ENDPOINT_SELECT 0
|
|
/* [4:0] */
|
|
#define EP_INITIALIZED 16
|
|
#define SEQUENCE_NUMBER_RESET 17
|
|
#define CLEAR_ACK_ERROR_CODE 20
|
|
u32 pl_reg_6;
|
|
u32 pl_reg_7;
|
|
u32 pl_reg_8;
|
|
u32 pl_ep_status_1;
|
|
/* Protocol Layer Endpoint Status 1*/
|
|
#define PL_EP_STATUS_1 0x820
|
|
#define STATE 16
|
|
#define ACK_GOOD_NORMAL 0x11
|
|
#define ACK_GOOD_MORE_ACKS_TO_COME 0x16
|
|
u32 pl_ep_status_2;
|
|
u32 pl_ep_status_3;
|
|
/* Protocol Layer Endpoint Status 3*/
|
|
#define PL_EP_STATUS_3 0x828
|
|
#define SEQUENCE_NUMBER 0
|
|
u32 pl_ep_status_4;
|
|
/* Protocol Layer Endpoint Status 4*/
|
|
#define PL_EP_STATUS_4 0x82c
|
|
u32 pl_ep_cfg_4;
|
|
/* Protocol Layer Endpoint Configuration 4*/
|
|
#define PL_EP_CFG_4 0x830
|
|
#define NON_CTRL_IN_TOLERATE_BAD_DIR 6
|
|
} __packed;
|
|
|
|
#endif /* __LINUX_USB_USB338X_H */
|