AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-12 12:16:41 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
5a49f2036a
linux_dsm_epyc7002/drivers/pci/hotplug/pciehp.h
Rajesh Shah 5a49f2036a [PATCH] PCI Express Hotplug: clear sticky power-fault bit 
Per the PCI Express spec, the power-fault-detected bit in the
slot status register can be set anytime hardware detects a power
fault, regardless of whether the slot has a device populated in
it or not. This bit is sticky and must be explicitly cleared.
This patch is needed to allow hot-add after such a power fault
has been detected.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:04:27 -08:00

288 lines
8.5 KiB
C
Raw Blame History

/*
* PCI Express Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCIEHP_H
#define _PCIEHP_H
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/pcieport_if.h>
#include "pci_hotplug.h"
#define MY_NAME "pciehp"
extern int pciehp_poll_mode;
extern int pciehp_poll_time;
extern int pciehp_debug;
extern int pciehp_force;
/*#define dbg(format, arg...) do { if (pciehp_debug) printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); } while (0)*/
#define dbg(format, arg...) do { if (pciehp_debug) printk("%s: " format, MY_NAME , ## arg); } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
struct hotplug_params {
u8 cache_line_size;
u8 latency_timer;
u8 enable_serr;
u8 enable_perr;
};
struct slot {
struct slot *next;
u8 bus;
u8 device;
u32 number;
u8 state;
struct timer_list task_event;
u8 hp_slot;
struct controller *ctrl;
struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
struct list_head slot_list;
};
struct event_info {
u32 event_type;
u8 hp_slot;
};
typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
struct php_ctlr_state_s {
struct php_ctlr_state_s *pnext;
struct pci_dev *pci_dev;
unsigned int irq;
unsigned long flags; /* spinlock's */
u32 slot_device_offset;
u32 num_slots;
struct timer_list int_poll_timer; /* Added for poll event */
php_intr_callback_t attention_button_callback;
php_intr_callback_t switch_change_callback;
php_intr_callback_t presence_change_callback;
php_intr_callback_t power_fault_callback;
void *callback_instance_id;
struct ctrl_reg *creg; /* Ptr to controller register space */
};
#define MAX_EVENTS 10
struct controller {
struct controller *next;
struct semaphore crit_sect; /* critical section semaphore */
struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
struct pci_dev *pci_dev;
struct pci_bus *pci_bus;
struct event_info event_queue[MAX_EVENTS];
struct slot *slot;
struct hpc_ops *hpc_ops;
wait_queue_head_t queue; /* sleep & wake process */
u8 next_event;
u8 bus;
u8 device;
u8 function;
u8 slot_device_offset;
u32 first_slot; /* First physical slot number */ /* PCIE only has 1 slot */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
u8 ctrlcap;
u16 vendor_id;
u8 cap_base;
};
#define INT_BUTTON_IGNORE 0
#define INT_PRESENCE_ON 1
#define INT_PRESENCE_OFF 2
#define INT_SWITCH_CLOSE 3
#define INT_SWITCH_OPEN 4
#define INT_POWER_FAULT 5
#define INT_POWER_FAULT_CLEAR 6
#define INT_BUTTON_PRESS 7
#define INT_BUTTON_RELEASE 8
#define INT_BUTTON_CANCEL 9
#define STATIC_STATE 0
#define BLINKINGON_STATE 1
#define BLINKINGOFF_STATE 2
#define POWERON_STATE 3
#define POWEROFF_STATE 4
#define PCI_TO_PCI_BRIDGE_CLASS 0x00060400
/* Error messages */
#define INTERLOCK_OPEN 0x00000002
#define ADD_NOT_SUPPORTED 0x00000003
#define CARD_FUNCTIONING 0x00000005
#define ADAPTER_NOT_SAME 0x00000006
#define NO_ADAPTER_PRESENT 0x00000009
#define NOT_ENOUGH_RESOURCES 0x0000000B
#define DEVICE_TYPE_NOT_SUPPORTED 0x0000000C
#define WRONG_BUS_FREQUENCY 0x0000000D
#define POWER_FAILURE 0x0000000E
#define REMOVE_NOT_SUPPORTED 0x00000003
#define DISABLE_CARD 1
/* Field definitions in Slot Capabilities Register */
#define ATTN_BUTTN_PRSN 0x00000001
#define PWR_CTRL_PRSN 0x00000002
#define MRL_SENS_PRSN 0x00000004
#define ATTN_LED_PRSN 0x00000008
#define PWR_LED_PRSN 0x00000010
#define HP_SUPR_RM_SUP 0x00000020
#define ATTN_BUTTN(cap) (cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(cap) (cap & PWR_CTRL_PRSN)
#define MRL_SENS(cap) (cap & MRL_SENS_PRSN)
#define ATTN_LED(cap) (cap & ATTN_LED_PRSN)
#define PWR_LED(cap) (cap & PWR_LED_PRSN)
#define HP_SUPR_RM(cap) (cap & HP_SUPR_RM_SUP)
/*
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
#define msg_button_on "PCI slot #%d - powering on due to button press.\n"
#define msg_button_off "PCI slot #%d - powering off due to button press.\n"
#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n"
/* controller functions */
extern int pciehp_event_start_thread (void);
extern void pciehp_event_stop_thread (void);
extern int pciehp_enable_slot (struct slot *slot);
extern int pciehp_disable_slot (struct slot *slot);
extern u8 pciehp_handle_attention_button (u8 hp_slot, void *inst_id);
extern u8 pciehp_handle_switch_change (u8 hp_slot, void *inst_id);
extern u8 pciehp_handle_presence_change (u8 hp_slot, void *inst_id);
extern u8 pciehp_handle_power_fault (u8 hp_slot, void *inst_id);
/* extern void long_delay (int delay); */
/* pci functions */
extern int pciehp_configure_device (struct slot *p_slot);
extern int pciehp_unconfigure_device (struct slot *p_slot);
extern int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev);
extern void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp);
/* Global variables */
extern struct controller *pciehp_ctrl_list;
/* Inline functions */
static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
{
struct slot *p_slot, *tmp_slot = NULL;
p_slot = ctrl->slot;
while (p_slot && (p_slot->device != device)) {
tmp_slot = p_slot;
p_slot = p_slot->next;
}
if (p_slot == NULL) {
err("ERROR: pciehp_find_slot device=0x%x\n", device);
p_slot = tmp_slot;
}
return p_slot;
}
static inline int wait_for_ctrl_irq(struct controller *ctrl)
{
int retval = 0;
DECLARE_WAITQUEUE(wait, current);
add_wait_queue(&ctrl->queue, &wait);
if (!pciehp_poll_mode)
/* Sleep for up to 1 second */
msleep_interruptible(1000);
else
msleep_interruptible(2500);
remove_wait_queue(&ctrl->queue, &wait);
if (signal_pending(current))
retval = -EINTR;
return retval;
}
#define SLOT_NAME_SIZE 10
static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
{
snprintf(buffer, buffer_size, "%04d_%04d", slot->bus, slot->number);
}
enum php_ctlr_type {
PCI,
ISA,
ACPI
};
int pcie_init(struct controller *ctrl, struct pcie_device *dev);
/* This has no meaning for PCI Express, as there is only 1 slot per port */
int pcie_get_ctlr_slot_config(struct controller *ctrl,
int *num_ctlr_slots,
int *first_device_num,
int *physical_slot_num,
u8 *ctrlcap);
struct hpc_ops {
int (*power_on_slot) (struct slot *slot);
int (*power_off_slot) (struct slot *slot);
int (*get_power_status) (struct slot *slot, u8 *status);
int (*get_attention_status) (struct slot *slot, u8 *status);
int (*set_attention_status) (struct slot *slot, u8 status);
int (*get_latch_status) (struct slot *slot, u8 *status);
int (*get_adapter_status) (struct slot *slot, u8 *status);
int (*get_max_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
int (*get_cur_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
int (*get_max_lnk_width) (struct slot *slot, enum pcie_link_width *value);
int (*get_cur_lnk_width) (struct slot *slot, enum pcie_link_width *value);
int (*query_power_fault) (struct slot *slot);
void (*green_led_on) (struct slot *slot);
void (*green_led_off) (struct slot *slot);
void (*green_led_blink) (struct slot *slot);
void (*release_ctlr) (struct controller *ctrl);
int (*check_lnk_status) (struct controller *ctrl);
};
#endif /* _PCIEHP_H */
Reference in New Issue View Git Blame Copy Permalink