Yaniv Rosner 5a1fbf4046 bnx2x: Fix SFP+ current leakage ... Per measurements, the SFP+ suffered from small current leakage in two cases: - When no module was plugged and TX laser was disabled. The fix was to enable it, and when module is plugged in, check if it needs to be disabled. - When over-current event occurs due to invalid SFP+ module, the HW basically shuts down the current for this module, but the SW needs to complete this by issuing a power down via a GPIO. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2012-11-28 10:59:21 -05:00
..
bnx2x	bnx2x: Fix SFP+ current leakage	2012-11-28 10:59:21 -05:00
b44.c	b44: add 64 bit stats	2012-07-18 09:29:43 -07:00
b44.h	b44: add 64 bit stats	2012-07-18 09:29:43 -07:00
bcm63xx_enet.c	bcm63xx-enet: fix PHY name to match MDIO bus name	2012-02-13 16:04:08 -05:00
bcm63xx_enet.h	MIPS: BCM63XX: Move DMA descriptor definition into common header file	2012-08-30 20:15:52 +02:00
bnx2_fw.h
bnx2.c	PCI changes for the 3.7 merge window:	2012-10-01 12:05:36 -07:00
bnx2.h	bnx2: Read PCI function number from internal register	2012-06-16 22:22:59 -07:00
cnic_defs.h	bnx2x,cnic: use FW 7.8.2	2012-10-01 16:43:17 -04:00
cnic_if.h	bnx2x,cnic: use FW 7.8.2	2012-10-01 16:43:17 -04:00
cnic.c	bnx2x,cnic: use FW 7.8.2	2012-10-01 16:43:17 -04:00
cnic.h	cnic: Allocate kcq resource only on devices that support FCoE.	2012-09-10 15:48:21 -04:00
Kconfig	tg3: unconditionally select HWMON support when tg3 is enabled.	2012-10-01 18:07:39 -04:00
Makefile
sb1250-mac.c	drivers/net: Remove alloc_etherdev error messages	2012-01-31 16:20:48 -05:00
tg3.c	tg3: Use tp->rxq_cnt when checking RSS tables.	2012-11-14 22:04:29 -05:00
tg3.h	tg3: Prevent spurious tx timeout by setting carrier off before tx disable.	2012-11-14 22:04:28 -05:00