mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 15:36:56 +07:00
3a42d36c6a
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
411 lines
6.9 KiB
Plaintext
411 lines
6.9 KiB
Plaintext
/*
|
|
* Copyright (C) 2011 - 2014 Xilinx
|
|
* Copyright (C) 2012 National Instruments Corp.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
/dts-v1/;
|
|
#include "zynq-7000.dtsi"
|
|
|
|
/ {
|
|
model = "Zynq ZC702 Development Board";
|
|
compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
|
|
|
|
aliases {
|
|
ethernet0 = &gem0;
|
|
i2c0 = &i2c0;
|
|
serial0 = &uart1;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x40000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
autorepeat;
|
|
sw14 {
|
|
label = "sw14";
|
|
gpios = <&gpio0 12 0>;
|
|
linux,code = <108>; /* down */
|
|
wakeup-source;
|
|
autorepeat;
|
|
};
|
|
sw13 {
|
|
label = "sw13";
|
|
gpios = <&gpio0 14 0>;
|
|
linux,code = <103>; /* up */
|
|
wakeup-source;
|
|
autorepeat;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
ds23 {
|
|
label = "ds23";
|
|
gpios = <&gpio0 10 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
usb_phy0: phy0 {
|
|
compatible = "usb-nop-xceiv";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&amba {
|
|
ocm: sram@fffc0000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0xfffc0000 0x10000>;
|
|
};
|
|
};
|
|
|
|
&can0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can0_default>;
|
|
};
|
|
|
|
&clkc {
|
|
ps-clk-frequency = <33333333>;
|
|
};
|
|
|
|
&gem0 {
|
|
status = "okay";
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <ðernet_phy>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gem0_default>;
|
|
|
|
ethernet_phy: ethernet-phy@7 {
|
|
reg = <7>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
&gpio0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio0_default>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0_default>;
|
|
|
|
i2cswitch@74 {
|
|
compatible = "nxp,pca9548";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x74>;
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
si570: clock-generator@5d {
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
temperature-stability = <50>;
|
|
reg = <0x5d>;
|
|
factory-fout = <156250000>;
|
|
clock-frequency = <148500000>;
|
|
};
|
|
};
|
|
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
adv7511: hdmi-tx@39 {
|
|
compatible = "adi,adv7511";
|
|
reg = <0x39>;
|
|
adi,input-depth = <8>;
|
|
adi,input-colorspace = "yuv422";
|
|
adi,input-clock = "1x";
|
|
adi,input-style = <3>;
|
|
adi,input-justification = "right";
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
eeprom@54 {
|
|
compatible = "atmel,24c08";
|
|
reg = <0x54>;
|
|
};
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
gpio@21 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x21>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
i2c@7 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <7>;
|
|
hwmon@52 {
|
|
compatible = "ti,ucd9248";
|
|
reg = <52>;
|
|
};
|
|
hwmon@53 {
|
|
compatible = "ti,ucd9248";
|
|
reg = <53>;
|
|
};
|
|
hwmon@54 {
|
|
compatible = "ti,ucd9248";
|
|
reg = <54>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl0 {
|
|
pinctrl_can0_default: can0-default {
|
|
mux {
|
|
function = "can0";
|
|
groups = "can0_9_grp";
|
|
};
|
|
|
|
conf {
|
|
groups = "can0_9_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO46";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO47";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_gem0_default: gem0-default {
|
|
mux {
|
|
function = "ethernet0";
|
|
groups = "ethernet0_0_grp";
|
|
};
|
|
|
|
conf {
|
|
groups = "ethernet0_0_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <4>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
|
|
bias-high-impedance;
|
|
low-power-disable;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
|
|
bias-disable;
|
|
low-power-enable;
|
|
};
|
|
|
|
mux-mdio {
|
|
function = "mdio0";
|
|
groups = "mdio0_0_grp";
|
|
};
|
|
|
|
conf-mdio {
|
|
groups = "mdio0_0_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_gpio0_default: gpio0-default {
|
|
mux {
|
|
function = "gpio0";
|
|
groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
|
|
"gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
|
|
"gpio0_13_grp", "gpio0_14_grp";
|
|
};
|
|
|
|
conf {
|
|
groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
|
|
"gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
|
|
"gpio0_13_grp", "gpio0_14_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
|
|
conf-pull-up {
|
|
pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
|
|
bias-pull-up;
|
|
};
|
|
|
|
conf-pull-none {
|
|
pins = "MIO7", "MIO8";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_i2c0_default: i2c0-default {
|
|
mux {
|
|
groups = "i2c0_10_grp";
|
|
function = "i2c0";
|
|
};
|
|
|
|
conf {
|
|
groups = "i2c0_10_grp";
|
|
bias-pull-up;
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
};
|
|
|
|
pinctrl_sdhci0_default: sdhci0-default {
|
|
mux {
|
|
groups = "sdio0_2_grp";
|
|
function = "sdio0";
|
|
};
|
|
|
|
conf {
|
|
groups = "sdio0_2_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
bias-disable;
|
|
};
|
|
|
|
mux-cd {
|
|
groups = "gpio0_0_grp";
|
|
function = "sdio0_cd";
|
|
};
|
|
|
|
conf-cd {
|
|
groups = "gpio0_0_grp";
|
|
bias-high-impedance;
|
|
bias-pull-up;
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
|
|
mux-wp {
|
|
groups = "gpio0_15_grp";
|
|
function = "sdio0_wp";
|
|
};
|
|
|
|
conf-wp {
|
|
groups = "gpio0_15_grp";
|
|
bias-high-impedance;
|
|
bias-pull-up;
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
};
|
|
|
|
pinctrl_uart1_default: uart1-default {
|
|
mux {
|
|
groups = "uart1_10_grp";
|
|
function = "uart1";
|
|
};
|
|
|
|
conf {
|
|
groups = "uart1_10_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO49";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO48";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_usb0_default: usb0-default {
|
|
mux {
|
|
groups = "usb0_0_grp";
|
|
function = "usb0";
|
|
};
|
|
|
|
conf {
|
|
groups = "usb0_0_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO29", "MIO31", "MIO36";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
|
|
"MIO35", "MIO37", "MIO38", "MIO39";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdhci0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdhci0_default>;
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_default>;
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
usb-phy = <&usb_phy0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb0_default>;
|
|
};
|