mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 22:40:51 +07:00
58cda884ec
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
133 lines
3.4 KiB
C
133 lines
3.4 KiB
C
/*
|
|
* SMS/SDRC (SDRAM controller) common code for OMAP2/3
|
|
*
|
|
* Copyright (C) 2005, 2008 Texas Instruments Inc.
|
|
* Copyright (C) 2005, 2008 Nokia Corporation
|
|
*
|
|
* Tony Lindgren <tony@atomide.com>
|
|
* Paul Walmsley
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/list.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/clock.h>
|
|
#include <mach/sram.h>
|
|
|
|
#include "prm.h"
|
|
|
|
#include <mach/sdrc.h>
|
|
#include "sdrc.h"
|
|
|
|
static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
|
|
|
|
void __iomem *omap2_sdrc_base;
|
|
void __iomem *omap2_sms_base;
|
|
|
|
/* SDRC_POWER register bits */
|
|
#define SDRC_POWER_EXTCLKDIS_SHIFT 3
|
|
#define SDRC_POWER_PWDENA_SHIFT 2
|
|
#define SDRC_POWER_PAGEPOLICY_SHIFT 0
|
|
|
|
/**
|
|
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
|
|
* @r: SDRC clock rate (in Hz)
|
|
* @sdrc_cs0: chip select 0 ram timings **
|
|
* @sdrc_cs1: chip select 1 ram timings **
|
|
*
|
|
* Return pre-calculated values for the SDRC_ACTIM_CTRLA,
|
|
* SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
|
|
* structs,for a given SDRC clock rate 'r'.
|
|
* These parameters control various timing delays in the SDRAM controller
|
|
* that are expressed in terms of the number of SDRC clock cycles to
|
|
* wait; hence the clock rate dependency.
|
|
*
|
|
* Supports 2 different timing parameters for both chip selects.
|
|
*
|
|
* Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
|
|
* Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
|
|
* as sdrc_init_params_cs_0.
|
|
*
|
|
* Fills in the struct omap_sdrc_params * for each chip select.
|
|
* Returns 0 upon success or -1 upon failure.
|
|
*/
|
|
int omap2_sdrc_get_params(unsigned long r,
|
|
struct omap_sdrc_params **sdrc_cs0,
|
|
struct omap_sdrc_params **sdrc_cs1)
|
|
{
|
|
struct omap_sdrc_params *sp0, *sp1;
|
|
|
|
if (!sdrc_init_params_cs0)
|
|
return -1;
|
|
|
|
sp0 = sdrc_init_params_cs0;
|
|
sp1 = sdrc_init_params_cs1;
|
|
|
|
while (sp0->rate && sp0->rate != r) {
|
|
sp0++;
|
|
if (sdrc_init_params_cs1)
|
|
sp1++;
|
|
}
|
|
|
|
if (!sp0->rate)
|
|
return -1;
|
|
|
|
*sdrc_cs0 = sp0;
|
|
*sdrc_cs1 = sp1;
|
|
return 0;
|
|
}
|
|
|
|
|
|
void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
|
|
{
|
|
omap2_sdrc_base = omap2_globals->sdrc;
|
|
omap2_sms_base = omap2_globals->sms;
|
|
}
|
|
|
|
/**
|
|
* omap2_sdrc_init - initialize SMS, SDRC devices on boot
|
|
* @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
|
|
* Support for 2 chip selects timings
|
|
*
|
|
* Turn on smart idle modes for SDRAM scheduler and controller.
|
|
* Program a known-good configuration for the SDRC to deal with buggy
|
|
* bootloaders.
|
|
*/
|
|
void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
|
|
struct omap_sdrc_params *sdrc_cs1)
|
|
{
|
|
u32 l;
|
|
|
|
l = sms_read_reg(SMS_SYSCONFIG);
|
|
l &= ~(0x3 << 3);
|
|
l |= (0x2 << 3);
|
|
sms_write_reg(l, SMS_SYSCONFIG);
|
|
|
|
l = sdrc_read_reg(SDRC_SYSCONFIG);
|
|
l &= ~(0x3 << 3);
|
|
l |= (0x2 << 3);
|
|
sdrc_write_reg(l, SDRC_SYSCONFIG);
|
|
|
|
sdrc_init_params_cs0 = sdrc_cs0;
|
|
sdrc_init_params_cs1 = sdrc_cs1;
|
|
|
|
/* XXX Enable SRFRONIDLEREQ here also? */
|
|
l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
|
|
(1 << SDRC_POWER_PWDENA_SHIFT) |
|
|
(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
|
|
sdrc_write_reg(l, SDRC_POWER);
|
|
}
|