mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 06:26:48 +07:00
16c75a13e3
Make sure ethernet and mdio nodes are disabled by default and enable them explicitly only on boards that actually use them. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
437 lines
11 KiB
Plaintext
437 lines
11 KiB
Plaintext
/*
|
|
* Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "am33xx.dtsi"
|
|
|
|
/ {
|
|
model = "Newflow AM335x NanoBone";
|
|
compatible = "ti,am33xx";
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&dcdc2_reg>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led@0 {
|
|
label = "nanobone:green:usr1";
|
|
gpios = <&gpio1 5 0>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
};
|
|
|
|
&am33xx_pinmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&misc_pins>;
|
|
|
|
misc_pins: misc_pins {
|
|
pinctrl-single,pins = <
|
|
0x15c (PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
|
|
>;
|
|
};
|
|
|
|
gpmc_pins: gpmc_pins {
|
|
pinctrl-single,pins = <
|
|
0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
|
|
0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
|
|
0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
|
|
0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
|
|
0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
|
|
0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
|
|
0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
|
|
0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
|
|
0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
|
|
0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
|
|
0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
|
|
0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
|
|
0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
|
|
0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
|
|
0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
|
|
0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
|
|
|
|
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
|
|
0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
|
|
0x80 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
|
|
0x84 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
|
|
0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
|
|
|
|
0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
|
|
0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
|
|
0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
|
|
0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
|
|
|
|
0xa4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
|
|
0xa8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
|
|
0xac (PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
|
|
0xb0 (PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
|
|
0xb4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
|
|
0xb8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
|
|
0xbc (PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
|
|
|
|
0xe0 (PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
|
|
0xe4 (PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
|
|
0xe8 (PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
|
|
>;
|
|
};
|
|
|
|
i2c0_pins: i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
|
0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
|
>;
|
|
};
|
|
|
|
uart0_pins: uart0_pins {
|
|
pinctrl-single,pins = <
|
|
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
|
0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
|
|
>;
|
|
};
|
|
|
|
uart1_pins: uart1_pins {
|
|
pinctrl-single,pins = <
|
|
0x178 (PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
|
|
0x17c (PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
|
|
0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
|
|
0x184 (PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
|
|
>;
|
|
};
|
|
|
|
uart2_pins: uart2_pins {
|
|
pinctrl-single,pins = <
|
|
0xc0 (PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
|
|
0xc4 (PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
|
|
0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
|
|
0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
|
|
>;
|
|
};
|
|
|
|
uart3_pins: uart3_pins {
|
|
pinctrl-single,pins = <
|
|
0xc8 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
|
|
0xcc (PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
|
|
0x160 (PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
|
|
0x164 (PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
|
|
>;
|
|
};
|
|
|
|
uart4_pins: uart4_pins {
|
|
pinctrl-single,pins = <
|
|
0xd0 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
|
|
0xd4 (PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
|
|
0x168 (PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
|
|
0x16c (PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
|
|
>;
|
|
};
|
|
|
|
uart5_pins: uart5_pins {
|
|
pinctrl-single,pins = <
|
|
0xd8 (PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
|
|
0x144 (PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
|
|
0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
|
|
0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
|
|
0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
|
|
0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
|
|
0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
|
|
0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
|
|
0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "okay";
|
|
rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
rs485-rts-active-high;
|
|
rs485-rx-during-tx;
|
|
rs485-rts-delay = <1 1>;
|
|
linux,rs485-enabled-at-boot-time;
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
status = "okay";
|
|
rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
|
|
rs485-rts-active-high;
|
|
rs485-rts-delay = <1 1>;
|
|
linux,rs485-enabled-at-boot-time;
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart5_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
gpio@20 {
|
|
compatible = "mcp,mcp23017";
|
|
reg = <0x20>;
|
|
};
|
|
|
|
tps: tps@24 {
|
|
reg = <0x24>;
|
|
};
|
|
|
|
eeprom@53 {
|
|
compatible = "mcp,24c02";
|
|
reg = <0x53>;
|
|
pagesize = <8>;
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1307";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
compatible = "ti,am3352-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
status = "okay";
|
|
gpmc,num-waitpins = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpmc_pins>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */
|
|
|
|
nor@0,0 {
|
|
reg = <0 0x00000000 0x08000000>;
|
|
compatible = "cfi-flash";
|
|
linux,mtd-name = "spansion,s29gl010p11t";
|
|
bank-width = <2>;
|
|
|
|
gpmc,mux-add-data = <2>;
|
|
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <160>;
|
|
gpmc,cs-wr-off-ns = <160>;
|
|
gpmc,adv-on-ns = <10>;
|
|
gpmc,adv-rd-off-ns = <30>;
|
|
gpmc,adv-wr-off-ns = <30>;
|
|
gpmc,oe-on-ns = <40>;
|
|
gpmc,oe-off-ns = <160>;
|
|
gpmc,we-on-ns = <40>;
|
|
gpmc,we-off-ns = <160>;
|
|
gpmc,rd-cycle-ns = <160>;
|
|
gpmc,wr-cycle-ns = <160>;
|
|
gpmc,access-ns = <150>;
|
|
gpmc,page-burst-access-ns = <10>;
|
|
gpmc,cycle2cycle-samecsen;
|
|
gpmc,cycle2cycle-delay-ns = <20>;
|
|
gpmc,wr-data-mux-bus-ns = <70>;
|
|
gpmc,wr-access-ns = <80>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/*
|
|
MTD partition table
|
|
===================
|
|
+------------+-->0x00000000-> U-Boot start
|
|
| |
|
|
| |-->0x000BFFFF-> U-Boot end
|
|
| |-->0x000C0000-> ENV1 start
|
|
| |
|
|
| |-->0x000DFFFF-> ENV1 end
|
|
| |-->0x000E0000-> ENV2 start
|
|
| |
|
|
| |-->0x000FFFFF-> ENV2 end
|
|
| |-->0x00100000-> Kernel start
|
|
| |
|
|
| |-->0x004FFFFF-> Kernel end
|
|
| |-->0x00500000-> File system start
|
|
| |
|
|
| |-->0x014FFFFF-> File system end
|
|
| |-->0x01500000-> User data start
|
|
| |
|
|
| |-->0x03FFFFFF-> User data end
|
|
| |-->0x04000000-> Data storage start
|
|
| |
|
|
+------------+-->0x08000000-> NOR end (Free end)
|
|
*/
|
|
partition@0 {
|
|
label = "boot";
|
|
reg = <0x00000000 0x000c0000>; /* 768KB */
|
|
};
|
|
|
|
partition@1 {
|
|
label = "env1";
|
|
reg = <0x000c0000 0x00020000>; /* 128KB */
|
|
};
|
|
|
|
partition@2 {
|
|
label = "env2";
|
|
reg = <0x000e0000 0x00020000>; /* 128KB */
|
|
};
|
|
|
|
partition@3 {
|
|
label = "kernel";
|
|
reg = <0x00100000 0x00400000>; /* 4MB */
|
|
};
|
|
|
|
partition@4 {
|
|
label = "rootfs";
|
|
reg = <0x00500000 0x01000000>; /* 16MB */
|
|
};
|
|
|
|
partition@5 {
|
|
label = "user";
|
|
reg = <0x01500000 0x02b00000>; /* 43MB */
|
|
};
|
|
|
|
partition@6 {
|
|
label = "data";
|
|
reg = <0x04000000 0x04000000>; /* 64MB */
|
|
};
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
dual_emac = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&davinci_mdio {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <0>;
|
|
dual_emac_res_vlan = <1>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
dual_emac_res_vlan = <2>;
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
vmmc-supply = <&ldo4_reg>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio3 8 0>;
|
|
wp-gpios = <&gpio3 18 0>;
|
|
};
|
|
|
|
#include "tps65217.dtsi"
|
|
|
|
&tps {
|
|
regulators {
|
|
dcdc1_reg: regulator@0 {
|
|
/* +1.5V voltage with ±4% tolerance */
|
|
regulator-min-microvolt = <1450000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc2_reg: regulator@1 {
|
|
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <915000>;
|
|
regulator-max-microvolt = <1140000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc3_reg: regulator@2 {
|
|
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <915000>;
|
|
regulator-max-microvolt = <1140000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: regulator@3 {
|
|
/* +1.8V voltage with ±4% tolerance */
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <1870000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: regulator@4 {
|
|
/* +3.3V voltage with ±4% tolerance */
|
|
regulator-min-microvolt = <3175000>;
|
|
regulator-max-microvolt = <3430000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: regulator@5 {
|
|
/* +1.8V voltage with ±4% tolerance */
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <1870000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: regulator@6 {
|
|
/* +3.3V voltage with ±4% tolerance */
|
|
regulator-min-microvolt = <3175000>;
|
|
regulator-max-microvolt = <3430000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|