linux_dsm_epyc7002/drivers/ata/libahci_platform.c
Mark Brown 962399bb7f ata: libahci_platform: Fix regulator_get_optional() misuse
This driver is using regulator_get_optional() to handle all the supplies
that it handles, and only ever enables and disables all supplies en masse
without ever doing any other configuration of the device to handle missing
power. These are clear signs that the API is being misused - it should only
be used for supplies that may be physically absent from the system and in
these cases the hardware usually needs different configuration if the
supply is missing. Instead use normal regualtor_get(), if the supply is
not described in DT then the framework will substitute a dummy regulator in
so no special handling is needed by the consumer driver.

In the case of the PHY regulator the handling in the driver is a hack to
deal with integrated PHYs; the supplies are only optional in the sense
that that there's some confusion in the code about where they're bound to.
From a code point of view they function exactly as normal supplies so can
be treated as such. It'd probably be better to model this by instantiating
a PHY object for integrated PHYs.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:22:20 -06:00

849 lines
20 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* AHCI SATA platform library
*
* Copyright 2004-2005 Red Hat, Inc.
* Jeff Garzik <jgarzik@pobox.com>
* Copyright 2010 MontaVista Software, LLC.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/of_platform.h>
#include <linux/reset.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
struct ata_port_operations ahci_platform_ops = {
.inherits = &ahci_ops,
.host_stop = ahci_host_stop,
};
EXPORT_SYMBOL_GPL(ahci_platform_ops);
/**
* ahci_platform_enable_phys - Enable PHYs
* @hpriv: host private area to store config values
*
* This function enables all the PHYs found in hpriv->phys, if any.
* If a PHY fails to be enabled, it disables all the PHYs already
* enabled in reverse order and returns an error.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
{
int rc, i;
for (i = 0; i < hpriv->nports; i++) {
rc = phy_init(hpriv->phys[i]);
if (rc)
goto disable_phys;
rc = phy_set_mode(hpriv->phys[i], PHY_MODE_SATA);
if (rc) {
phy_exit(hpriv->phys[i]);
goto disable_phys;
}
rc = phy_power_on(hpriv->phys[i]);
if (rc) {
phy_exit(hpriv->phys[i]);
goto disable_phys;
}
}
return 0;
disable_phys:
while (--i >= 0) {
phy_power_off(hpriv->phys[i]);
phy_exit(hpriv->phys[i]);
}
return rc;
}
/**
* ahci_platform_disable_phys - Disable PHYs
* @hpriv: host private area to store config values
*
* This function disables all PHYs found in hpriv->phys.
*/
static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
{
int i;
for (i = 0; i < hpriv->nports; i++) {
phy_power_off(hpriv->phys[i]);
phy_exit(hpriv->phys[i]);
}
}
/**
* ahci_platform_enable_clks - Enable platform clocks
* @hpriv: host private area to store config values
*
* This function enables all the clks found in hpriv->clks, starting at
* index 0. If any clk fails to enable it disables all the clks already
* enabled in reverse order, and then returns an error.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
{
int c, rc;
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
rc = clk_prepare_enable(hpriv->clks[c]);
if (rc)
goto disable_unprepare_clk;
}
return 0;
disable_unprepare_clk:
while (--c >= 0)
clk_disable_unprepare(hpriv->clks[c]);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
/**
* ahci_platform_disable_clks - Disable platform clocks
* @hpriv: host private area to store config values
*
* This function disables all the clks found in hpriv->clks, in reverse
* order of ahci_platform_enable_clks (starting at the end of the array).
*/
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
{
int c;
for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
if (hpriv->clks[c])
clk_disable_unprepare(hpriv->clks[c]);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
/**
* ahci_platform_enable_regulators - Enable regulators
* @hpriv: host private area to store config values
*
* This function enables all the regulators found in controller and
* hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
* disables all the regulators already enabled in reverse order and
* returns an error.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
{
int rc, i;
rc = regulator_enable(hpriv->ahci_regulator);
if (rc)
return rc;
rc = regulator_enable(hpriv->phy_regulator);
if (rc)
goto disable_ahci_pwrs;
for (i = 0; i < hpriv->nports; i++) {
if (!hpriv->target_pwrs[i])
continue;
rc = regulator_enable(hpriv->target_pwrs[i]);
if (rc)
goto disable_target_pwrs;
}
return 0;
disable_target_pwrs:
while (--i >= 0)
if (hpriv->target_pwrs[i])
regulator_disable(hpriv->target_pwrs[i]);
regulator_disable(hpriv->phy_regulator);
disable_ahci_pwrs:
regulator_disable(hpriv->ahci_regulator);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
/**
* ahci_platform_disable_regulators - Disable regulators
* @hpriv: host private area to store config values
*
* This function disables all regulators found in hpriv->target_pwrs and
* AHCI controller.
*/
void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
{
int i;
for (i = 0; i < hpriv->nports; i++) {
if (!hpriv->target_pwrs[i])
continue;
regulator_disable(hpriv->target_pwrs[i]);
}
regulator_disable(hpriv->ahci_regulator);
regulator_disable(hpriv->phy_regulator);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
/**
* ahci_platform_enable_resources - Enable platform resources
* @hpriv: host private area to store config values
*
* This function enables all ahci_platform managed resources in the
* following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
* 3) Resets
* 4) Phys
*
* If resource enabling fails at any point the previous enabled resources
* are disabled in reverse order.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
{
int rc;
rc = ahci_platform_enable_regulators(hpriv);
if (rc)
return rc;
rc = ahci_platform_enable_clks(hpriv);
if (rc)
goto disable_regulator;
rc = reset_control_deassert(hpriv->rsts);
if (rc)
goto disable_clks;
rc = ahci_platform_enable_phys(hpriv);
if (rc)
goto disable_resets;
return 0;
disable_resets:
reset_control_assert(hpriv->rsts);
disable_clks:
ahci_platform_disable_clks(hpriv);
disable_regulator:
ahci_platform_disable_regulators(hpriv);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
/**
* ahci_platform_disable_resources - Disable platform resources
* @hpriv: host private area to store config values
*
* This function disables all ahci_platform managed resources in the
* following order:
* 1) Phys
* 2) Resets
* 3) Clocks (through ahci_platform_disable_clks)
* 4) Regulator
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
ahci_platform_disable_phys(hpriv);
reset_control_assert(hpriv->rsts);
ahci_platform_disable_clks(hpriv);
ahci_platform_disable_regulators(hpriv);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
static void ahci_platform_put_resources(struct device *dev, void *res)
{
struct ahci_host_priv *hpriv = res;
int c;
if (hpriv->got_runtime_pm) {
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
}
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
/*
* The regulators are tied to child node device and not to the
* SATA device itself. So we can't use devm for automatically
* releasing them. We have to do it manually here.
*/
for (c = 0; c < hpriv->nports; c++)
if (hpriv->target_pwrs && hpriv->target_pwrs[c])
regulator_put(hpriv->target_pwrs[c]);
kfree(hpriv->target_pwrs);
}
static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
struct device *dev, struct device_node *node)
{
int rc;
hpriv->phys[port] = devm_of_phy_get(dev, node, NULL);
if (!IS_ERR(hpriv->phys[port]))
return 0;
rc = PTR_ERR(hpriv->phys[port]);
switch (rc) {
case -ENOSYS:
/* No PHY support. Check if PHY is required. */
if (of_find_property(node, "phys", NULL)) {
dev_err(dev,
"couldn't get PHY in node %pOFn: ENOSYS\n",
node);
break;
}
/* fall through */
case -ENODEV:
/* continue normally */
hpriv->phys[port] = NULL;
rc = 0;
break;
case -EPROBE_DEFER:
/* Do not complain yet */
break;
default:
dev_err(dev,
"couldn't get PHY in node %pOFn: %d\n",
node, rc);
break;
}
return rc;
}
static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
struct device *dev)
{
struct regulator *target_pwr;
int rc = 0;
target_pwr = regulator_get(dev, "target");
if (!IS_ERR(target_pwr))
hpriv->target_pwrs[port] = target_pwr;
else
rc = PTR_ERR(target_pwr);
return rc;
}
/**
* ahci_platform_get_resources - Get platform resources
* @pdev: platform device to get resources for
* @flags: bitmap representing the resource to get
*
* This function allocates an ahci_host_priv struct, and gets the following
* resources, storing a reference to them inside the returned struct:
*
* 1) mmio registers (IORESOURCE_MEM 0, mandatory)
* 2) regulator for controlling the targets power (optional)
* regulator for controlling the AHCI controller (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
* 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
* 5) phys (optional)
*
* RETURNS:
* The allocated ahci_host_priv on success, otherwise an ERR_PTR value
*/
struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
unsigned int flags)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct clk *clk;
struct device_node *child;
int i, enabled_ports = 0, rc = -ENOMEM, child_nodes;
u32 mask_port_map = 0;
if (!devres_open_group(dev, NULL, GFP_KERNEL))
return ERR_PTR(-ENOMEM);
hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
GFP_KERNEL);
if (!hpriv)
goto err_out;
devres_add(dev, hpriv);
hpriv->mmio = devm_ioremap_resource(dev,
platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (IS_ERR(hpriv->mmio)) {
rc = PTR_ERR(hpriv->mmio);
goto err_out;
}
for (i = 0; i < AHCI_MAX_CLKS; i++) {
/*
* For now we must use clk_get(dev, NULL) for the first clock,
* because some platforms (da850, spear13xx) are not yet
* converted to use devicetree for clocks. For new platforms
* this is equivalent to of_clk_get(dev->of_node, 0).
*/
if (i == 0)
clk = clk_get(dev, NULL);
else
clk = of_clk_get(dev->of_node, i);
if (IS_ERR(clk)) {
rc = PTR_ERR(clk);
if (rc == -EPROBE_DEFER)
goto err_out;
break;
}
hpriv->clks[i] = clk;
}
hpriv->ahci_regulator = devm_regulator_get(dev, "ahci");
if (IS_ERR(hpriv->ahci_regulator)) {
rc = PTR_ERR(hpriv->ahci_regulator);
if (rc != 0)
goto err_out;
}
hpriv->phy_regulator = devm_regulator_get(dev, "phy");
if (IS_ERR(hpriv->phy_regulator)) {
rc = PTR_ERR(hpriv->phy_regulator);
if (rc == -EPROBE_DEFER)
goto err_out;
rc = 0;
hpriv->phy_regulator = NULL;
}
if (flags & AHCI_PLATFORM_GET_RESETS) {
hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(hpriv->rsts)) {
rc = PTR_ERR(hpriv->rsts);
goto err_out;
}
}
hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
/*
* If no sub-node was found, we still need to set nports to
* one in order to be able to use the
* ahci_platform_[en|dis]able_[phys|regulators] functions.
*/
if (!child_nodes)
hpriv->nports = 1;
hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL);
if (!hpriv->phys) {
rc = -ENOMEM;
goto err_out;
}
/*
* We cannot use devm_ here, since ahci_platform_put_resources() uses
* target_pwrs after devm_ have freed memory
*/
hpriv->target_pwrs = kcalloc(hpriv->nports, sizeof(*hpriv->target_pwrs), GFP_KERNEL);
if (!hpriv->target_pwrs) {
rc = -ENOMEM;
goto err_out;
}
if (child_nodes) {
for_each_child_of_node(dev->of_node, child) {
u32 port;
struct platform_device *port_dev __maybe_unused;
if (!of_device_is_available(child))
continue;
if (of_property_read_u32(child, "reg", &port)) {
rc = -EINVAL;
of_node_put(child);
goto err_out;
}
if (port >= hpriv->nports) {
dev_warn(dev, "invalid port number %d\n", port);
continue;
}
mask_port_map |= BIT(port);
#ifdef CONFIG_OF_ADDRESS
of_platform_device_create(child, NULL, NULL);
port_dev = of_find_device_by_node(child);
if (port_dev) {
rc = ahci_platform_get_regulator(hpriv, port,
&port_dev->dev);
if (rc == -EPROBE_DEFER) {
of_node_put(child);
goto err_out;
}
}
#endif
rc = ahci_platform_get_phy(hpriv, port, dev, child);
if (rc) {
of_node_put(child);
goto err_out;
}
enabled_ports++;
}
if (!enabled_ports) {
dev_warn(dev, "No port enabled\n");
rc = -ENODEV;
goto err_out;
}
if (!hpriv->mask_port_map)
hpriv->mask_port_map = mask_port_map;
} else {
/*
* If no sub-node was found, keep this for device tree
* compatibility
*/
rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node);
if (rc)
goto err_out;
rc = ahci_platform_get_regulator(hpriv, 0, dev);
if (rc == -EPROBE_DEFER)
goto err_out;
}
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
hpriv->got_runtime_pm = true;
devres_remove_group(dev, NULL);
return hpriv;
err_out:
devres_release_group(dev, NULL);
return ERR_PTR(rc);
}
EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
/**
* ahci_platform_init_host - Bring up an ahci-platform host
* @pdev: platform device pointer for the host
* @hpriv: ahci-host private data for the host
* @pi_template: template for the ata_port_info to use
* @sht: scsi_host_template to use when registering
*
* This function does all the usual steps needed to bring up an
* ahci-platform host, note any necessary resources (ie clks, phys, etc.)
* must be initialized / enabled before calling this.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_init_host(struct platform_device *pdev,
struct ahci_host_priv *hpriv,
const struct ata_port_info *pi_template,
struct scsi_host_template *sht)
{
struct device *dev = &pdev->dev;
struct ata_port_info pi = *pi_template;
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ata_host *host;
int i, irq, n_ports, rc;
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
if (irq != -EPROBE_DEFER)
dev_err(dev, "no irq\n");
return irq;
}
hpriv->irq = irq;
/* prepare host */
pi.private_data = (void *)(unsigned long)hpriv->flags;
ahci_save_initial_config(dev, hpriv);
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
ahci_set_em_messages(hpriv, &pi);
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* both CAP.NP and port_map.
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host)
return -ENOMEM;
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "mmio %pR",
platform_get_resource(pdev, IORESOURCE_MEM, 0));
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
if (hpriv->cap & HOST_CAP_64) {
rc = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
if (rc) {
rc = dma_coerce_mask_and_coherent(dev,
DMA_BIT_MASK(32));
if (rc) {
dev_err(dev, "Failed to enable 64-bit DMA.\n");
return rc;
}
dev_warn(dev, "Enable 32-bit DMA instead of 64-bit.\n");
}
}
rc = ahci_reset_controller(host);
if (rc)
return rc;
ahci_init_controller(host);
ahci_print_info(host, "platform");
return ahci_host_activate(host, sht);
}
EXPORT_SYMBOL_GPL(ahci_platform_init_host);
static void ahci_host_stop(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
ahci_platform_disable_resources(hpriv);
}
/**
* ahci_platform_shutdown - Disable interrupts and stop DMA for host ports
* @pdev: platform device pointer for the host
*
* This function is called during system shutdown and performs the minimal
* deconfiguration required to ensure that an ahci_platform host cannot
* corrupt or otherwise interfere with a new kernel being started with kexec.
*/
void ahci_platform_shutdown(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
int i;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
/* Disable port interrupts */
if (ap->ops->freeze)
ap->ops->freeze(ap);
/* Stop the port DMA engines */
if (ap->ops->port_stop)
ap->ops->port_stop(ap);
}
/* Disable and clear host interrupts */
writel(readl(mmio + HOST_CTL) & ~HOST_IRQ_EN, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
writel(GENMASK(host->n_ports, 0), mmio + HOST_IRQ_STAT);
}
EXPORT_SYMBOL_GPL(ahci_platform_shutdown);
#ifdef CONFIG_PM_SLEEP
/**
* ahci_platform_suspend_host - Suspend an ahci-platform host
* @dev: device pointer for the host
*
* This function does all the usual steps needed to suspend an
* ahci-platform host, note any necessary resources (ie clks, phys, etc.)
* must be disabled after calling this.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_suspend_host(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
return -EIO;
}
/*
* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
*/
ctl = readl(mmio + HOST_CTL);
ctl &= ~HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
ahci_platform_disable_phys(hpriv);
return ata_host_suspend(host, PMSG_SUSPEND);
}
EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
/**
* ahci_platform_resume_host - Resume an ahci-platform host
* @dev: device pointer for the host
*
* This function does all the usual steps needed to resume an ahci-platform
* host, note any necessary resources (ie clks, phys, etc.) must be
* initialized / enabled before calling this.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_resume_host(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
return rc;
ahci_init_controller(host);
}
if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
ahci_platform_enable_phys(hpriv);
ata_host_resume(host);
return 0;
}
EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
/**
* ahci_platform_suspend - Suspend an ahci-platform device
* @dev: the platform device to suspend
*
* This function suspends the host associated with the device, followed by
* disabling all the resources of the device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
rc = ahci_platform_suspend_host(dev);
if (rc)
return rc;
ahci_platform_disable_resources(hpriv);
return 0;
}
EXPORT_SYMBOL_GPL(ahci_platform_suspend);
/**
* ahci_platform_resume - Resume an ahci-platform device
* @dev: the platform device to resume
*
* This function enables all the resources of the device followed by
* resuming the host associated with the device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_resume(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
rc = ahci_platform_enable_resources(hpriv);
if (rc)
return rc;
rc = ahci_platform_resume_host(dev);
if (rc)
goto disable_resources;
/* We resumed so update PM runtime state */
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
disable_resources:
ahci_platform_disable_resources(hpriv);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_resume);
#endif
MODULE_DESCRIPTION("AHCI SATA platform library");
MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
MODULE_LICENSE("GPL");