linux_dsm_epyc7002/drivers/mfd/wm8350-core.c
Dan Carpenter cb9b224500 mfd: Fix incorrect error check for wm8350-core
It was *pdev which was allocated not pdev.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:47 +01:00

748 lines
17 KiB
C

/*
* wm8350-core.c -- Device access for Wolfson WM8350
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
*
* Author: Liam Girdwood, Mark Brown
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/audio.h>
#include <linux/mfd/wm8350/comparator.h>
#include <linux/mfd/wm8350/gpio.h>
#include <linux/mfd/wm8350/pmic.h>
#include <linux/mfd/wm8350/rtc.h>
#include <linux/mfd/wm8350/supply.h>
#include <linux/mfd/wm8350/wdt.h>
#define WM8350_UNLOCK_KEY 0x0013
#define WM8350_LOCK_KEY 0x0000
#define WM8350_CLOCK_CONTROL_1 0x28
#define WM8350_AIF_TEST 0x74
/* debug */
#define WM8350_BUS_DEBUG 0
#if WM8350_BUS_DEBUG
#define dump(regs, src) do { \
int i_; \
u16 *src_ = src; \
printk(KERN_DEBUG); \
for (i_ = 0; i_ < regs; i_++) \
printk(" 0x%4.4x", *src_++); \
printk("\n"); \
} while (0);
#else
#define dump(bytes, src)
#endif
#define WM8350_LOCK_DEBUG 0
#if WM8350_LOCK_DEBUG
#define ldbg(format, arg...) printk(format, ## arg)
#else
#define ldbg(format, arg...)
#endif
/*
* WM8350 Device IO
*/
static DEFINE_MUTEX(io_mutex);
static DEFINE_MUTEX(reg_lock_mutex);
/* Perform a physical read from the device.
*/
static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
u16 *dest)
{
int i, ret;
int bytes = num_regs * 2;
dev_dbg(wm8350->dev, "volatile read\n");
ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest);
for (i = reg; i < reg + num_regs; i++) {
/* Cache is CPU endian */
dest[i - reg] = be16_to_cpu(dest[i - reg]);
/* Mask out non-readable bits */
dest[i - reg] &= wm8350_reg_io_map[i].readable;
}
dump(num_regs, dest);
return ret;
}
static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest)
{
int i;
int end = reg + num_regs;
int ret = 0;
int bytes = num_regs * 2;
if (wm8350->read_dev == NULL)
return -ENODEV;
if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
dev_err(wm8350->dev, "invalid reg %x\n",
reg + num_regs - 1);
return -EINVAL;
}
dev_dbg(wm8350->dev,
"%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs);
#if WM8350_BUS_DEBUG
/* we can _safely_ read any register, but warn if read not supported */
for (i = reg; i < end; i++) {
if (!wm8350_reg_io_map[i].readable)
dev_warn(wm8350->dev,
"reg R%d is not readable\n", i);
}
#endif
/* if any volatile registers are required, then read back all */
for (i = reg; i < end; i++)
if (wm8350_reg_io_map[i].vol)
return wm8350_phys_read(wm8350, reg, num_regs, dest);
/* no volatiles, then cache is good */
dev_dbg(wm8350->dev, "cache read\n");
memcpy(dest, &wm8350->reg_cache[reg], bytes);
dump(num_regs, dest);
return ret;
}
static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg)
{
if (reg == WM8350_SECURITY ||
wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
return 0;
if ((reg == WM8350_GPIO_CONFIGURATION_I_O) ||
(reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
return 1;
return 0;
}
static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
{
int i;
int end = reg + num_regs;
int bytes = num_regs * 2;
if (wm8350->write_dev == NULL)
return -ENODEV;
if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
dev_err(wm8350->dev, "invalid reg %x\n",
reg + num_regs - 1);
return -EINVAL;
}
/* it's generally not a good idea to write to RO or locked registers */
for (i = reg; i < end; i++) {
if (!wm8350_reg_io_map[i].writable) {
dev_err(wm8350->dev,
"attempted write to read only reg R%d\n", i);
return -EINVAL;
}
if (is_reg_locked(wm8350, i)) {
dev_err(wm8350->dev,
"attempted write to locked reg R%d\n", i);
return -EINVAL;
}
src[i - reg] &= wm8350_reg_io_map[i].writable;
wm8350->reg_cache[i] =
(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
| src[i - reg];
src[i - reg] = cpu_to_be16(src[i - reg]);
}
/* Actually write it out */
return wm8350->write_dev(wm8350, reg, bytes, (char *)src);
}
/*
* Safe read, modify, write methods
*/
int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
u16 data;
int err;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, reg, 1, &data);
if (err) {
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
goto out;
}
data &= ~mask;
err = wm8350_write(wm8350, reg, 1, &data);
if (err)
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
out:
mutex_unlock(&io_mutex);
return err;
}
EXPORT_SYMBOL_GPL(wm8350_clear_bits);
int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
u16 data;
int err;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, reg, 1, &data);
if (err) {
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
goto out;
}
data |= mask;
err = wm8350_write(wm8350, reg, 1, &data);
if (err)
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
out:
mutex_unlock(&io_mutex);
return err;
}
EXPORT_SYMBOL_GPL(wm8350_set_bits);
u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
{
u16 data;
int err;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, reg, 1, &data);
if (err)
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
mutex_unlock(&io_mutex);
return data;
}
EXPORT_SYMBOL_GPL(wm8350_reg_read);
int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
{
int ret;
u16 data = val;
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, reg, 1, &data);
if (ret)
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_write);
int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
u16 *dest)
{
int err = 0;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, start_reg, regs, dest);
if (err)
dev_err(wm8350->dev, "block read starting from R%d failed\n",
start_reg);
mutex_unlock(&io_mutex);
return err;
}
EXPORT_SYMBOL_GPL(wm8350_block_read);
int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
u16 *src)
{
int ret = 0;
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, start_reg, regs, src);
if (ret)
dev_err(wm8350->dev, "block write starting at R%d failed\n",
start_reg);
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_block_write);
/**
* wm8350_reg_lock()
*
* The WM8350 has a hardware lock which can be used to prevent writes to
* some registers (generally those which can cause particularly serious
* problems if misused). This function enables that lock.
*/
int wm8350_reg_lock(struct wm8350 *wm8350)
{
u16 key = WM8350_LOCK_KEY;
int ret;
ldbg(__func__);
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
if (ret)
dev_err(wm8350->dev, "lock failed\n");
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_lock);
/**
* wm8350_reg_unlock()
*
* The WM8350 has a hardware lock which can be used to prevent writes to
* some registers (generally those which can cause particularly serious
* problems if misused). This function disables that lock so updates
* can be performed. For maximum safety this should be done only when
* required.
*/
int wm8350_reg_unlock(struct wm8350 *wm8350)
{
u16 key = WM8350_UNLOCK_KEY;
int ret;
ldbg(__func__);
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
if (ret)
dev_err(wm8350->dev, "unlock failed\n");
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
{
u16 reg, result = 0;
int tries = 5;
if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
return -EINVAL;
if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
&& (scale != 0 || vref != 0))
return -EINVAL;
mutex_lock(&wm8350->auxadc_mutex);
/* Turn on the ADC */
reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
if (scale || vref) {
reg = scale << 13;
reg |= vref << 12;
wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
}
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
reg |= 1 << channel | WM8350_AUXADC_POLL;
wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
do {
schedule_timeout_interruptible(1);
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
} while ((reg & WM8350_AUXADC_POLL) && --tries);
if (!tries)
dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
else
result = wm8350_reg_read(wm8350,
WM8350_AUX1_READBACK + channel);
/* Turn off the ADC */
reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
reg & ~WM8350_AUXADC_ENA);
mutex_unlock(&wm8350->auxadc_mutex);
return result & WM8350_AUXADC_DATA1_MASK;
}
EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
/*
* Cache is always host endian.
*/
static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
{
int i, ret = 0;
u16 value;
const u16 *reg_map;
switch (type) {
case 0:
switch (mode) {
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
case 0:
reg_map = wm8350_mode0_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
case 1:
reg_map = wm8350_mode1_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
case 2:
reg_map = wm8350_mode2_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
case 3:
reg_map = wm8350_mode3_defaults;
break;
#endif
default:
dev_err(wm8350->dev,
"WM8350 configuration mode %d not supported\n",
mode);
return -EINVAL;
}
break;
case 1:
switch (mode) {
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
case 0:
reg_map = wm8351_mode0_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
case 1:
reg_map = wm8351_mode1_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
case 2:
reg_map = wm8351_mode2_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
case 3:
reg_map = wm8351_mode3_defaults;
break;
#endif
default:
dev_err(wm8350->dev,
"WM8351 configuration mode %d not supported\n",
mode);
return -EINVAL;
}
break;
case 2:
switch (mode) {
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
case 0:
reg_map = wm8352_mode0_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
case 1:
reg_map = wm8352_mode1_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
case 2:
reg_map = wm8352_mode2_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
case 3:
reg_map = wm8352_mode3_defaults;
break;
#endif
default:
dev_err(wm8350->dev,
"WM8352 configuration mode %d not supported\n",
mode);
return -EINVAL;
}
break;
default:
dev_err(wm8350->dev,
"WM835x configuration mode %d not supported\n",
mode);
return -EINVAL;
}
wm8350->reg_cache =
kmalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL);
if (wm8350->reg_cache == NULL)
return -ENOMEM;
/* Read the initial cache state back from the device - this is
* a PMIC so the device many not be in a virgin state and we
* can't rely on the silicon values.
*/
ret = wm8350->read_dev(wm8350, 0,
sizeof(u16) * (WM8350_MAX_REGISTER + 1),
wm8350->reg_cache);
if (ret < 0) {
dev_err(wm8350->dev,
"failed to read initial cache values\n");
goto out;
}
/* Mask out uncacheable/unreadable bits and the audio. */
for (i = 0; i < WM8350_MAX_REGISTER; i++) {
if (wm8350_reg_io_map[i].readable &&
(i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
value = be16_to_cpu(wm8350->reg_cache[i]);
value &= wm8350_reg_io_map[i].readable;
wm8350->reg_cache[i] = value;
} else
wm8350->reg_cache[i] = reg_map[i];
}
out:
return ret;
}
/*
* Register a client device. This is non-fatal since there is no need to
* fail the entire device init due to a single platform device failing.
*/
static void wm8350_client_dev_register(struct wm8350 *wm8350,
const char *name,
struct platform_device **pdev)
{
int ret;
*pdev = platform_device_alloc(name, -1);
if (*pdev == NULL) {
dev_err(wm8350->dev, "Failed to allocate %s\n", name);
return;
}
(*pdev)->dev.parent = wm8350->dev;
platform_set_drvdata(*pdev, wm8350);
ret = platform_device_add(*pdev);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
platform_device_put(*pdev);
*pdev = NULL;
}
}
int wm8350_device_init(struct wm8350 *wm8350, int irq,
struct wm8350_platform_data *pdata)
{
int ret;
u16 id1, id2, mask_rev;
u16 cust_id, mode, chip_rev;
/* get WM8350 revision and config mode */
ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
goto err;
}
ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
goto err;
}
ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
&mask_rev);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
goto err;
}
id1 = be16_to_cpu(id1);
id2 = be16_to_cpu(id2);
mask_rev = be16_to_cpu(mask_rev);
if (id1 != 0x6143) {
dev_err(wm8350->dev,
"Device with ID %x is not a WM8350\n", id1);
ret = -ENODEV;
goto err;
}
mode = id2 & WM8350_CONF_STS_MASK >> 10;
cust_id = id2 & WM8350_CUST_ID_MASK;
chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
dev_info(wm8350->dev,
"CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
mode, cust_id, mask_rev, chip_rev);
if (cust_id != 0) {
dev_err(wm8350->dev, "Unsupported CUST_ID\n");
ret = -ENODEV;
goto err;
}
switch (mask_rev) {
case 0:
wm8350->pmic.max_dcdc = WM8350_DCDC_6;
wm8350->pmic.max_isink = WM8350_ISINK_B;
switch (chip_rev) {
case WM8350_REV_E:
dev_info(wm8350->dev, "WM8350 Rev E\n");
break;
case WM8350_REV_F:
dev_info(wm8350->dev, "WM8350 Rev F\n");
break;
case WM8350_REV_G:
dev_info(wm8350->dev, "WM8350 Rev G\n");
wm8350->power.rev_g_coeff = 1;
break;
case WM8350_REV_H:
dev_info(wm8350->dev, "WM8350 Rev H\n");
wm8350->power.rev_g_coeff = 1;
break;
default:
/* For safety we refuse to run on unknown hardware */
dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
ret = -ENODEV;
goto err;
}
break;
case 1:
wm8350->pmic.max_dcdc = WM8350_DCDC_4;
wm8350->pmic.max_isink = WM8350_ISINK_A;
switch (chip_rev) {
case 0:
dev_info(wm8350->dev, "WM8351 Rev A\n");
wm8350->power.rev_g_coeff = 1;
break;
case 1:
dev_info(wm8350->dev, "WM8351 Rev B\n");
wm8350->power.rev_g_coeff = 1;
break;
default:
dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
ret = -ENODEV;
goto err;
}
break;
case 2:
wm8350->pmic.max_dcdc = WM8350_DCDC_6;
wm8350->pmic.max_isink = WM8350_ISINK_B;
switch (chip_rev) {
case 0:
dev_info(wm8350->dev, "WM8352 Rev A\n");
wm8350->power.rev_g_coeff = 1;
break;
default:
dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
ret = -ENODEV;
goto err;
}
break;
default:
dev_err(wm8350->dev, "Unknown MASK_REV\n");
ret = -ENODEV;
goto err;
}
ret = wm8350_create_cache(wm8350, mask_rev, mode);
if (ret < 0) {
dev_err(wm8350->dev, "Failed to create register cache\n");
return ret;
}
mutex_init(&wm8350->auxadc_mutex);
ret = wm8350_irq_init(wm8350, irq, pdata);
if (ret < 0)
goto err;
if (pdata && pdata->init) {
ret = pdata->init(wm8350);
if (ret != 0) {
dev_err(wm8350->dev, "Platform init() failed: %d\n",
ret);
goto err_irq;
}
}
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
wm8350_client_dev_register(wm8350, "wm8350-codec",
&(wm8350->codec.pdev));
wm8350_client_dev_register(wm8350, "wm8350-gpio",
&(wm8350->gpio.pdev));
wm8350_client_dev_register(wm8350, "wm8350-hwmon",
&(wm8350->hwmon.pdev));
wm8350_client_dev_register(wm8350, "wm8350-power",
&(wm8350->power.pdev));
wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));
return 0;
err_irq:
wm8350_irq_exit(wm8350);
err:
kfree(wm8350->reg_cache);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_device_init);
void wm8350_device_exit(struct wm8350 *wm8350)
{
int i;
for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
platform_device_unregister(wm8350->pmic.led[i].pdev);
for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
platform_device_unregister(wm8350->pmic.pdev[i]);
platform_device_unregister(wm8350->wdt.pdev);
platform_device_unregister(wm8350->rtc.pdev);
platform_device_unregister(wm8350->power.pdev);
platform_device_unregister(wm8350->hwmon.pdev);
platform_device_unregister(wm8350->gpio.pdev);
platform_device_unregister(wm8350->codec.pdev);
wm8350_irq_exit(wm8350);
kfree(wm8350->reg_cache);
}
EXPORT_SYMBOL_GPL(wm8350_device_exit);
MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
MODULE_LICENSE("GPL");