mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 22:06:49 +07:00
5fa9167a1b
Most of the irq_req_t typedef'd struct can be re-worked quite easily: (1) IRQInfo2 was unused in any case, so drop it. (2) IRQInfo1 was used write-only, so drop it. (3) Instance (private data to be passed to the IRQ handler): Most PCMCIA drivers using pcmcia_request_irq() to actually register an IRQ handler set the "dev_id" to the same pointer as the "priv" pointer in struct pcmcia_device. Modify the two exceptions (ipwireless, ibmtr_cs) to also work this waym and set the IRQ handler's "dev_id" to p_dev->priv unconditionally. (4) Handler is to be of type irq_handler_t. (5) Handler != NULL already tells whether an IRQ handler is present. Therefore, we do not need the IRQ_HANDLER_PRESENT flag in irq_req_t.Attributes. CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: alsa-devel@alsa-project.org CC: Jaroslav Kysela <perex@perex.cz> CC: Jiri Kosina <jkosina@suse.cz> CC: Karsten Keil <isdn@linux-pingi.de> for the Bluetooth parts: Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
465 lines
15 KiB
C
465 lines
15 KiB
C
/*======================================================================
|
|
|
|
A driver for PCMCIA IDE/ATA disk cards
|
|
|
|
The contents of this file are subject to the Mozilla Public
|
|
License Version 1.1 (the "License"); you may not use this file
|
|
except in compliance with the License. You may obtain a copy of
|
|
the License at http://www.mozilla.org/MPL/
|
|
|
|
Software distributed under the License is distributed on an "AS
|
|
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
|
|
implied. See the License for the specific language governing
|
|
rights and limitations under the License.
|
|
|
|
The initial developer of the original code is David A. Hinds
|
|
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
|
|
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
|
|
|
|
Alternatively, the contents of this file may be used under the
|
|
terms of the GNU General Public License version 2 (the "GPL"), in
|
|
which case the provisions of the GPL are applicable instead of the
|
|
above. If you wish to allow the use of your version of this file
|
|
only under the terms of the GPL and not to allow others to use
|
|
your version of this file under the MPL, indicate your decision
|
|
by deleting the provisions above and replace them with the notice
|
|
and other provisions required by the GPL. If you do not delete
|
|
the provisions above, a recipient may use your version of this
|
|
file under either the MPL or the GPL.
|
|
|
|
======================================================================*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/major.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <pcmcia/cs_types.h>
|
|
#include <pcmcia/cs.h>
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/ds.h>
|
|
#include <pcmcia/cisreg.h>
|
|
#include <pcmcia/ciscode.h>
|
|
|
|
#define DRV_NAME "ide-cs"
|
|
|
|
/*====================================================================*/
|
|
|
|
/* Module parameters */
|
|
|
|
MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
|
|
MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
|
|
MODULE_LICENSE("Dual MPL/GPL");
|
|
|
|
/*====================================================================*/
|
|
|
|
typedef struct ide_info_t {
|
|
struct pcmcia_device *p_dev;
|
|
struct ide_host *host;
|
|
int ndev;
|
|
dev_node_t node;
|
|
} ide_info_t;
|
|
|
|
static void ide_release(struct pcmcia_device *);
|
|
static int ide_config(struct pcmcia_device *);
|
|
|
|
static void ide_detach(struct pcmcia_device *p_dev);
|
|
|
|
|
|
|
|
|
|
/*======================================================================
|
|
|
|
ide_attach() creates an "instance" of the driver, allocating
|
|
local data structures for one device. The device is registered
|
|
with Card Services.
|
|
|
|
======================================================================*/
|
|
|
|
static int ide_probe(struct pcmcia_device *link)
|
|
{
|
|
ide_info_t *info;
|
|
|
|
dev_dbg(&link->dev, "ide_attach()\n");
|
|
|
|
/* Create new ide device */
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
info->p_dev = link;
|
|
link->priv = info;
|
|
|
|
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
|
|
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
|
|
link->io.IOAddrLines = 3;
|
|
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
|
|
link->conf.Attributes = CONF_ENABLE_IRQ;
|
|
link->conf.IntType = INT_MEMORY_AND_IO;
|
|
|
|
return ide_config(link);
|
|
} /* ide_attach */
|
|
|
|
/*======================================================================
|
|
|
|
This deletes a driver "instance". The device is de-registered
|
|
with Card Services. If it has been released, all local data
|
|
structures are freed. Otherwise, the structures will be freed
|
|
when the device is released.
|
|
|
|
======================================================================*/
|
|
|
|
static void ide_detach(struct pcmcia_device *link)
|
|
{
|
|
ide_info_t *info = link->priv;
|
|
ide_hwif_t *hwif = info->host->ports[0];
|
|
unsigned long data_addr, ctl_addr;
|
|
|
|
dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
|
|
|
|
data_addr = hwif->io_ports.data_addr;
|
|
ctl_addr = hwif->io_ports.ctl_addr;
|
|
|
|
ide_release(link);
|
|
|
|
release_region(ctl_addr, 1);
|
|
release_region(data_addr, 8);
|
|
|
|
kfree(info);
|
|
} /* ide_detach */
|
|
|
|
static const struct ide_port_ops idecs_port_ops = {
|
|
.quirkproc = ide_undecoded_slave,
|
|
};
|
|
|
|
static const struct ide_port_info idecs_port_info = {
|
|
.port_ops = &idecs_port_ops,
|
|
.host_flags = IDE_HFLAG_NO_DMA,
|
|
.irq_flags = IRQF_SHARED,
|
|
.chipset = ide_pci,
|
|
};
|
|
|
|
static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
|
|
unsigned long irq, struct pcmcia_device *handle)
|
|
{
|
|
struct ide_host *host;
|
|
ide_hwif_t *hwif;
|
|
int i, rc;
|
|
struct ide_hw hw, *hws[] = { &hw };
|
|
|
|
if (!request_region(io, 8, DRV_NAME)) {
|
|
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
|
|
DRV_NAME, io, io + 7);
|
|
return NULL;
|
|
}
|
|
|
|
if (!request_region(ctl, 1, DRV_NAME)) {
|
|
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
|
|
DRV_NAME, ctl);
|
|
release_region(io, 8);
|
|
return NULL;
|
|
}
|
|
|
|
memset(&hw, 0, sizeof(hw));
|
|
ide_std_init_ports(&hw, io, ctl);
|
|
hw.irq = irq;
|
|
hw.dev = &handle->dev;
|
|
|
|
rc = ide_host_add(&idecs_port_info, hws, 1, &host);
|
|
if (rc)
|
|
goto out_release;
|
|
|
|
hwif = host->ports[0];
|
|
|
|
if (hwif->present)
|
|
return host;
|
|
|
|
/* retry registration in case device is still spinning up */
|
|
for (i = 0; i < 10; i++) {
|
|
msleep(100);
|
|
ide_port_scan(hwif);
|
|
if (hwif->present)
|
|
return host;
|
|
}
|
|
|
|
return host;
|
|
|
|
out_release:
|
|
release_region(ctl, 1);
|
|
release_region(io, 8);
|
|
return NULL;
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
ide_config() is scheduled to run after a CARD_INSERTION event
|
|
is received, to configure the PCMCIA socket, and to make the
|
|
ide device available to the system.
|
|
|
|
======================================================================*/
|
|
|
|
struct pcmcia_config_check {
|
|
unsigned long ctl_base;
|
|
int skip_vcc;
|
|
int is_kme;
|
|
};
|
|
|
|
static int pcmcia_check_one_config(struct pcmcia_device *pdev,
|
|
cistpl_cftable_entry_t *cfg,
|
|
cistpl_cftable_entry_t *dflt,
|
|
unsigned int vcc,
|
|
void *priv_data)
|
|
{
|
|
struct pcmcia_config_check *stk = priv_data;
|
|
|
|
/* Check for matching Vcc, unless we're desperate */
|
|
if (!stk->skip_vcc) {
|
|
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
|
|
if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
|
|
return -ENODEV;
|
|
} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
|
|
if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
|
|
pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
|
|
else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
|
|
pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
|
|
|
|
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
|
|
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
|
|
pdev->conf.ConfigIndex = cfg->index;
|
|
pdev->io.BasePort1 = io->win[0].base;
|
|
pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
|
|
if (!(io->flags & CISTPL_IO_16BIT))
|
|
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
|
|
if (io->nwin == 2) {
|
|
pdev->io.NumPorts1 = 8;
|
|
pdev->io.BasePort2 = io->win[1].base;
|
|
pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
|
|
if (pcmcia_request_io(pdev, &pdev->io) != 0)
|
|
return -ENODEV;
|
|
stk->ctl_base = pdev->io.BasePort2;
|
|
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
|
|
pdev->io.NumPorts1 = io->win[0].len;
|
|
pdev->io.NumPorts2 = 0;
|
|
if (pcmcia_request_io(pdev, &pdev->io) != 0)
|
|
return -ENODEV;
|
|
stk->ctl_base = pdev->io.BasePort1 + 0x0e;
|
|
} else
|
|
return -ENODEV;
|
|
/* If we've got this far, we're done */
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int ide_config(struct pcmcia_device *link)
|
|
{
|
|
ide_info_t *info = link->priv;
|
|
struct pcmcia_config_check *stk = NULL;
|
|
int ret = 0, is_kme = 0;
|
|
unsigned long io_base, ctl_base;
|
|
struct ide_host *host;
|
|
|
|
dev_dbg(&link->dev, "ide_config(0x%p)\n", link);
|
|
|
|
is_kme = ((link->manf_id == MANFID_KME) &&
|
|
((link->card_id == PRODID_KME_KXLC005_A) ||
|
|
(link->card_id == PRODID_KME_KXLC005_B)));
|
|
|
|
stk = kzalloc(sizeof(*stk), GFP_KERNEL);
|
|
if (!stk)
|
|
goto err_mem;
|
|
stk->is_kme = is_kme;
|
|
stk->skip_vcc = io_base = ctl_base = 0;
|
|
|
|
if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
|
|
stk->skip_vcc = 1;
|
|
if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
|
|
goto failed; /* No suitable config found */
|
|
}
|
|
io_base = link->io.BasePort1;
|
|
ctl_base = stk->ctl_base;
|
|
|
|
ret = pcmcia_request_irq(link, &link->irq);
|
|
if (ret)
|
|
goto failed;
|
|
ret = pcmcia_request_configuration(link, &link->conf);
|
|
if (ret)
|
|
goto failed;
|
|
|
|
/* disable drive interrupts during IDE probe */
|
|
outb(0x02, ctl_base);
|
|
|
|
/* special setup for KXLC005 card */
|
|
if (is_kme)
|
|
outb(0x81, ctl_base+1);
|
|
|
|
host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
|
|
if (host == NULL && link->io.NumPorts1 == 0x20) {
|
|
outb(0x02, ctl_base + 0x10);
|
|
host = idecs_register(io_base + 0x10, ctl_base + 0x10,
|
|
link->irq.AssignedIRQ, link);
|
|
}
|
|
|
|
if (host == NULL)
|
|
goto failed;
|
|
|
|
info->ndev = 1;
|
|
sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
|
|
info->node.major = host->ports[0]->major;
|
|
info->node.minor = 0;
|
|
info->host = host;
|
|
link->dev_node = &info->node;
|
|
printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
|
|
info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
|
|
|
|
kfree(stk);
|
|
return 0;
|
|
|
|
err_mem:
|
|
printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
|
|
goto failed;
|
|
|
|
failed:
|
|
kfree(stk);
|
|
ide_release(link);
|
|
return -ENODEV;
|
|
} /* ide_config */
|
|
|
|
/*======================================================================
|
|
|
|
After a card is removed, ide_release() will unregister the net
|
|
device, and release the PCMCIA configuration. If the device is
|
|
still open, this will be postponed until it is closed.
|
|
|
|
======================================================================*/
|
|
|
|
static void ide_release(struct pcmcia_device *link)
|
|
{
|
|
ide_info_t *info = link->priv;
|
|
struct ide_host *host = info->host;
|
|
|
|
dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
|
|
|
|
if (info->ndev)
|
|
/* FIXME: if this fails we need to queue the cleanup somehow
|
|
-- need to investigate the required PCMCIA magic */
|
|
ide_host_remove(host);
|
|
|
|
info->ndev = 0;
|
|
|
|
pcmcia_disable_device(link);
|
|
} /* ide_release */
|
|
|
|
|
|
/*======================================================================
|
|
|
|
The card status event handler. Mostly, this schedules other
|
|
stuff to run after an event is received. A CARD_REMOVAL event
|
|
also sets some flags to discourage the ide drivers from
|
|
talking to the ports.
|
|
|
|
======================================================================*/
|
|
|
|
static struct pcmcia_device_id ide_ids[] = {
|
|
PCMCIA_DEVICE_FUNC_ID(4),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
|
|
PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
|
|
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
|
|
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
|
|
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
|
|
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
|
|
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
|
|
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
|
|
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
|
|
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
|
|
PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
|
|
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
|
|
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
|
|
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
|
|
PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
|
|
PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
|
|
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
|
|
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
|
|
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
|
|
PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
|
|
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
|
|
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
|
|
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
|
|
PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
|
|
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
|
|
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
|
|
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
|
|
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
|
|
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
|
|
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
|
|
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
|
|
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
|
|
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
|
|
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
|
|
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
|
|
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
|
|
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
|
|
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
|
|
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
|
|
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
|
|
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
|
|
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
|
|
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
|
|
PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
|
|
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
|
|
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
|
|
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
|
|
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
|
|
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
|
|
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
|
|
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
|
|
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
|
|
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
|
|
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
|
|
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
|
|
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
|
|
PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
|
|
PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
|
|
PCMCIA_DEVICE_NULL,
|
|
};
|
|
MODULE_DEVICE_TABLE(pcmcia, ide_ids);
|
|
|
|
static struct pcmcia_driver ide_cs_driver = {
|
|
.owner = THIS_MODULE,
|
|
.drv = {
|
|
.name = "ide-cs",
|
|
},
|
|
.probe = ide_probe,
|
|
.remove = ide_detach,
|
|
.id_table = ide_ids,
|
|
};
|
|
|
|
static int __init init_ide_cs(void)
|
|
{
|
|
return pcmcia_register_driver(&ide_cs_driver);
|
|
}
|
|
|
|
static void __exit exit_ide_cs(void)
|
|
{
|
|
pcmcia_unregister_driver(&ide_cs_driver);
|
|
}
|
|
|
|
late_initcall(init_ide_cs);
|
|
module_exit(exit_ide_cs);
|