mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 10:06:00 +07:00
32adcaa010
Let's move cputype.h away from mach-mmp/ so that the drivers outside that directory are able to tell the precise silicon revision. The MMP3 USB OTG PHY driver needs this. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
273 lines
6.7 KiB
C
273 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* PXA910 Power Management Routines
|
|
*
|
|
* (C) Copyright 2009 Marvell International Ltd.
|
|
* All Rights Reserved
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/time.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/outercache.h>
|
|
|
|
#include <linux/soc/mmp/cputype.h>
|
|
#include "addr-map.h"
|
|
#include "pm-pxa910.h"
|
|
#include "regs-icu.h"
|
|
#include "irqs.h"
|
|
|
|
int pxa910_set_wake(struct irq_data *data, unsigned int on)
|
|
{
|
|
uint32_t awucrm = 0, apcr = 0;
|
|
int irq = data->irq;
|
|
|
|
/* setting wakeup sources */
|
|
switch (irq) {
|
|
/* wakeup line 2 */
|
|
case IRQ_PXA910_AP_GPIO:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(2);
|
|
apcr |= MPMU_APCR_SLPWP2;
|
|
break;
|
|
/* wakeup line 3 */
|
|
case IRQ_PXA910_KEYPAD:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
|
|
apcr |= MPMU_APCR_SLPWP3;
|
|
break;
|
|
case IRQ_PXA910_ROTARY:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
|
|
apcr |= MPMU_APCR_SLPWP3;
|
|
break;
|
|
case IRQ_PXA910_TRACKBALL:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
|
|
apcr |= MPMU_APCR_SLPWP3;
|
|
break;
|
|
/* wakeup line 4 */
|
|
case IRQ_PXA910_AP1_TIMER1:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
|
|
apcr |= MPMU_APCR_SLPWP4;
|
|
break;
|
|
case IRQ_PXA910_AP1_TIMER2:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
|
|
apcr |= MPMU_APCR_SLPWP4;
|
|
break;
|
|
case IRQ_PXA910_AP1_TIMER3:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
|
|
apcr |= MPMU_APCR_SLPWP4;
|
|
break;
|
|
case IRQ_PXA910_AP2_TIMER1:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
|
|
apcr |= MPMU_APCR_SLPWP4;
|
|
break;
|
|
case IRQ_PXA910_AP2_TIMER2:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
|
|
apcr |= MPMU_APCR_SLPWP4;
|
|
break;
|
|
case IRQ_PXA910_AP2_TIMER3:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
|
|
apcr |= MPMU_APCR_SLPWP4;
|
|
break;
|
|
case IRQ_PXA910_RTC_ALARM:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
|
|
apcr |= MPMU_APCR_SLPWP4;
|
|
break;
|
|
/* wakeup line 5 */
|
|
case IRQ_PXA910_USB1:
|
|
case IRQ_PXA910_USB2:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(5);
|
|
apcr |= MPMU_APCR_SLPWP5;
|
|
break;
|
|
/* wakeup line 6 */
|
|
case IRQ_PXA910_MMC:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(6)
|
|
| MPMU_AWUCRM_SDH1
|
|
| MPMU_AWUCRM_SDH2;
|
|
apcr |= MPMU_APCR_SLPWP6;
|
|
break;
|
|
/* wakeup line 7 */
|
|
case IRQ_PXA910_PMIC_INT:
|
|
awucrm = MPMU_AWUCRM_WAKEUP(7);
|
|
apcr |= MPMU_APCR_SLPWP7;
|
|
break;
|
|
default:
|
|
if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
|
|
awucrm = MPMU_AWUCRM_WAKEUP(2);
|
|
apcr |= MPMU_APCR_SLPWP2;
|
|
} else {
|
|
/* FIXME: This should return a proper error code ! */
|
|
printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
|
|
irq);
|
|
}
|
|
}
|
|
|
|
if (on) {
|
|
if (awucrm) {
|
|
awucrm |= __raw_readl(MPMU_AWUCRM);
|
|
__raw_writel(awucrm, MPMU_AWUCRM);
|
|
}
|
|
if (apcr) {
|
|
apcr = ~apcr & __raw_readl(MPMU_APCR);
|
|
__raw_writel(apcr, MPMU_APCR);
|
|
}
|
|
} else {
|
|
if (awucrm) {
|
|
awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
|
|
__raw_writel(awucrm, MPMU_AWUCRM);
|
|
}
|
|
if (apcr) {
|
|
apcr |= __raw_readl(MPMU_APCR);
|
|
__raw_writel(apcr, MPMU_APCR);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void pxa910_pm_enter_lowpower_mode(int state)
|
|
{
|
|
uint32_t idle_cfg, apcr;
|
|
|
|
idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
|
|
apcr = __raw_readl(MPMU_APCR);
|
|
|
|
apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
|
|
| MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
|
|
idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
|
|
| APMU_MOH_IDLE_CFG_MOH_PWRDWN);
|
|
|
|
switch (state) {
|
|
case POWER_MODE_UDR:
|
|
/* only shutdown APB in UDR */
|
|
apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
|
|
/* fall through */
|
|
case POWER_MODE_SYS_SLEEP:
|
|
apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */
|
|
apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */
|
|
/* fall through */
|
|
case POWER_MODE_APPS_SLEEP:
|
|
apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */
|
|
/* fall through */
|
|
case POWER_MODE_APPS_IDLE:
|
|
apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */
|
|
/* fall through */
|
|
case POWER_MODE_CORE_EXTIDLE:
|
|
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
|
|
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
|
|
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
|
|
| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
|
|
/* fall through */
|
|
case POWER_MODE_CORE_INTIDLE:
|
|
break;
|
|
}
|
|
|
|
/* program the memory controller hardware sleep type and auto wakeup */
|
|
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
|
|
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
|
|
__raw_writel(0x0, APMU_MC_HW_SLP_TYPE); /* auto refresh */
|
|
|
|
/* set DSPSD, DTCMSD, BBSD, MSASLPEN */
|
|
apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
|
|
| MPMU_APCR_MSASLPEN;
|
|
|
|
/*always set SLEPEN bit mainly for MSA*/
|
|
apcr |= MPMU_APCR_SLPEN;
|
|
|
|
/* finally write the registers back */
|
|
__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
|
|
__raw_writel(apcr, MPMU_APCR);
|
|
|
|
}
|
|
|
|
static int pxa910_pm_enter(suspend_state_t state)
|
|
{
|
|
unsigned int idle_cfg, reg = 0;
|
|
|
|
/*pmic thread not completed,exit;otherwise system can't be waked up*/
|
|
reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
|
|
if ((reg & 0x3) == 0)
|
|
return -EAGAIN;
|
|
|
|
idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
|
|
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
|
|
| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
|
|
__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
|
|
|
|
/* disable L2 */
|
|
outer_disable();
|
|
/* wait for l2 idle */
|
|
while (!(readl(CIU_REG(0x8)) & (1 << 16)))
|
|
udelay(1);
|
|
|
|
cpu_do_idle();
|
|
|
|
/* enable L2 */
|
|
outer_resume();
|
|
/* wait for l2 idle */
|
|
while (!(readl(CIU_REG(0x8)) & (1 << 16)))
|
|
udelay(1);
|
|
|
|
idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
|
|
idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
|
|
| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
|
|
__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called after processes are frozen, but before we shut down devices.
|
|
*/
|
|
static int pxa910_pm_prepare(void)
|
|
{
|
|
pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called after devices are re-setup, but before processes are thawed.
|
|
*/
|
|
static void pxa910_pm_finish(void)
|
|
{
|
|
pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
|
|
}
|
|
|
|
static int pxa910_pm_valid(suspend_state_t state)
|
|
{
|
|
return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
|
|
}
|
|
|
|
static const struct platform_suspend_ops pxa910_pm_ops = {
|
|
.valid = pxa910_pm_valid,
|
|
.prepare = pxa910_pm_prepare,
|
|
.enter = pxa910_pm_enter,
|
|
.finish = pxa910_pm_finish,
|
|
};
|
|
|
|
static int __init pxa910_pm_init(void)
|
|
{
|
|
uint32_t awucrm = 0;
|
|
|
|
if (!cpu_is_pxa910())
|
|
return -EIO;
|
|
|
|
suspend_set_ops(&pxa910_pm_ops);
|
|
|
|
/* Set the following bits for MMP3 playback with VCTXO on */
|
|
__raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
|
|
APMU_SQU_CLK_GATE_CTRL);
|
|
__raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
|
|
|
|
awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
|
|
__raw_writel(awucrm, MPMU_AWUCRM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
late_initcall(pxa910_pm_init);
|