mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 10:46:44 +07:00
5762ab71eb
Marvell Armada 3700 SoC comprises an SPI Controller. This Controller supports up to 4 SPI slave devices, with dedicated chip selects,supports SPI mode 0/1/2 and 3, CPIO or Fifo mode with DMA transfers and different SPI transfer mode (Single, Dual or Quad). This commit adds basic driver support for FIFO mode. In this mode, dedicated registers are used to store the instruction, the address, the read mode and the data. Write and Read FIFO are used to store the outcoming or incoming data. The data FIFOs are accessible via DMA or by the CPU. Only the CPU is supported for now. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
106 lines
4.5 KiB
Makefile
106 lines
4.5 KiB
Makefile
#
|
|
# Makefile for kernel SPI drivers.
|
|
#
|
|
|
|
ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
|
|
|
|
# small core, mostly translating board-specific
|
|
# config declarations into driver model code
|
|
obj-$(CONFIG_SPI_MASTER) += spi.o
|
|
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
|
|
obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o
|
|
|
|
# SPI master controller drivers (bus)
|
|
obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
|
|
obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o
|
|
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
|
|
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
|
|
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
|
|
obj-$(CONFIG_SPI_AXI_SPI_ENGINE) += spi-axi-spi-engine.o
|
|
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
|
|
obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm2835aux.o
|
|
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
|
|
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
|
|
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
|
|
obj-$(CONFIG_SPI_BCM_QSPI) += spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
|
|
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
|
|
obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
|
|
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
|
|
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
|
|
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
|
|
obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
|
|
obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o
|
|
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
|
|
obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
|
|
obj-$(CONFIG_SPI_DLN2) += spi-dln2.o
|
|
obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o
|
|
obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
|
|
obj-$(CONFIG_SPI_DW_PCI) += spi-dw-midpci.o
|
|
spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o
|
|
obj-$(CONFIG_SPI_EFM32) += spi-efm32.o
|
|
obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
|
|
obj-$(CONFIG_SPI_FALCON) += spi-falcon.o
|
|
obj-$(CONFIG_SPI_FSL_CPM) += spi-fsl-cpm.o
|
|
obj-$(CONFIG_SPI_FSL_DSPI) += spi-fsl-dspi.o
|
|
obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o
|
|
obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
|
|
obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
|
|
obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
|
|
obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
|
|
obj-$(CONFIG_SPI_IMX) += spi-imx.o
|
|
obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
|
|
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
|
|
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
|
|
obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o
|
|
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
|
|
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
|
|
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
|
|
obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
|
|
obj-$(CONFIG_SPI_MXS) += spi-mxs.o
|
|
obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
|
|
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
|
|
spi-octeon-objs := spi-cavium.o spi-cavium-octeon.o
|
|
obj-$(CONFIG_SPI_OCTEON) += spi-octeon.o
|
|
obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o
|
|
obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o
|
|
obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o
|
|
obj-$(CONFIG_SPI_TI_QSPI) += spi-ti-qspi.o
|
|
obj-$(CONFIG_SPI_ORION) += spi-orion.o
|
|
obj-$(CONFIG_SPI_PIC32) += spi-pic32.o
|
|
obj-$(CONFIG_SPI_PIC32_SQI) += spi-pic32-sqi.o
|
|
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
|
|
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
|
|
spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o
|
|
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
|
|
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
|
|
obj-$(CONFIG_SPI_QUP) += spi-qup.o
|
|
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
|
|
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
|
|
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
|
|
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
|
|
spi-s3c24xx-hw-y := spi-s3c24xx.o
|
|
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
|
|
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
|
|
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
|
|
obj-$(CONFIG_SPI_SH) += spi-sh.o
|
|
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
|
|
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
|
|
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
|
|
obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
|
|
obj-$(CONFIG_SPI_ST_SSC4) += spi-st-ssc4.o
|
|
obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o
|
|
obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
|
|
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
|
|
obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
|
|
obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o
|
|
obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
|
|
spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
|
|
obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
|
|
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
|
|
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
|
|
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
|
|
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
|
|
obj-$(CONFIG_SPI_XLP) += spi-xlp.o
|
|
obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
|
|
obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
|