linux_dsm_epyc7002/arch/m68k/include/asm/coldfire.h
Greg Ungerer 571f0608e1 m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs
The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses.
They do not use the setable peripheral address registers like the MBAR
and IPSBAR used on many other ColdFire parts. Don't use fake values
of MBAR and IPSBAR when using peripheral addresses for them, there
is no need to.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00

43 lines
1.3 KiB
C

/****************************************************************************/
/*
* coldfire.h -- Motorola ColdFire CPU sepecific defines
*
* (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2000, Lineo (www.lineo.com)
*/
/****************************************************************************/
#ifndef coldfire_h
#define coldfire_h
/****************************************************************************/
/*
* Define master clock frequency. This is essentially done at config
* time now. No point enumerating dozens of possible clock options
* here. Also the peripheral clock (bus clock) divide ratio is set
* at config time too.
*/
#ifdef CONFIG_CLOCK_SET
#define MCF_CLK CONFIG_CLOCK_FREQ
#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
#else
#error "Don't know what your ColdFire CPU clock frequency is??"
#endif
/*
* Define the processor support peripherals base address.
* This is generally setup by the boards start up code.
*/
#define MCF_MBAR 0x10000000
#define MCF_IPSBAR 0x40000000
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
#undef MCF_MBAR
#define MCF_MBAR MCF_IPSBAR
#endif
/****************************************************************************/
#endif /* coldfire_h */