mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-04 03:16:41 +07:00
ad68bb9f7a
This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well. Also, various places in the kernel had to be patched to use __raw_read/__raw_write. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
282 lines
6.4 KiB
C
282 lines
6.4 KiB
C
/*
|
|
* Support for Cogent CSB726
|
|
*
|
|
* Copyright (c) 2008 Dmitry Eremin-Solenikov
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/sm501.h>
|
|
#include <linux/smsc911x.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <mach/csb726.h>
|
|
#include <mach/mfp-pxa27x.h>
|
|
#include <plat/i2c.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/ohci.h>
|
|
#include <mach/pxa2xx-regs.h>
|
|
#include <mach/audio.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/*
|
|
* n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
|
|
* nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
|
|
* XXX: 21,
|
|
* XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
|
|
* XXX: 33 CS_5 for LAN9215 on R1
|
|
*/
|
|
|
|
static unsigned long csb726_pin_config[] = {
|
|
GPIO78_nCS_2, /* EXP_CS */
|
|
GPIO79_nCS_3, /* SMSC9215 */
|
|
GPIO80_nCS_4, /* SM501 */
|
|
|
|
GPIO52_GPIO, /* #SMSC9251 int */
|
|
GPIO53_GPIO, /* SM501 int */
|
|
|
|
GPIO1_GPIO, /* GPIO0 */
|
|
GPIO11_GPIO, /* GPIO1 */
|
|
GPIO9_GPIO, /* GPIO2 */
|
|
GPIO10_GPIO, /* GPIO3 */
|
|
GPIO16_PWM0_OUT, /* or GPIO4 */
|
|
GPIO17_PWM1_OUT, /* or GPIO5 */
|
|
GPIO94_GPIO, /* GPIO6 */
|
|
GPIO95_GPIO, /* GPIO7 */
|
|
GPIO96_GPIO, /* GPIO8 */
|
|
GPIO97_GPIO, /* GPIO9 */
|
|
GPIO15_GPIO, /* EXP_IRQ */
|
|
GPIO18_RDY, /* EXP_WAIT */
|
|
|
|
GPIO0_GPIO, /* PWR_INT */
|
|
GPIO104_GPIO, /* PWR_OFF */
|
|
|
|
GPIO12_GPIO, /* touch irq */
|
|
|
|
GPIO13_SSP2_TXD,
|
|
GPIO14_SSP2_SFRM,
|
|
MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
|
|
GPIO22_SSP2_SCLK,
|
|
|
|
GPIO81_SSP3_TXD,
|
|
GPIO82_SSP3_RXD,
|
|
GPIO83_SSP3_SFRM,
|
|
GPIO84_SSP3_SCLK,
|
|
|
|
GPIO20_GPIO, /* SDIO int */
|
|
GPIO32_MMC_CLK,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO112_MMC_CMD,
|
|
GPIO100_GPIO, /* SD CD */
|
|
GPIO101_GPIO, /* SD WP */
|
|
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO113_AC97_nRESET,
|
|
|
|
GPIO34_FFUART_RXD,
|
|
GPIO35_FFUART_CTS,
|
|
GPIO36_FFUART_DCD,
|
|
GPIO37_FFUART_DSR,
|
|
GPIO38_FFUART_RI,
|
|
GPIO39_FFUART_TXD,
|
|
GPIO40_FFUART_DTR,
|
|
GPIO41_FFUART_RTS,
|
|
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO54_nPCE_2,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16, /* maybe unused */
|
|
GPIO85_nPCE_1,
|
|
GPIO98_GPIO, /* CF IRQ */
|
|
GPIO99_GPIO, /* CF CD */
|
|
GPIO103_GPIO, /* Reset */
|
|
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
};
|
|
|
|
static struct pxamci_platform_data csb726_mci = {
|
|
.detect_delay_ms = 500,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
/* FIXME setpower */
|
|
.gpio_card_detect = CSB726_GPIO_MMC_DETECT,
|
|
.gpio_card_ro = CSB726_GPIO_MMC_RO,
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static struct pxaohci_platform_data csb726_ohci_platform_data = {
|
|
.port_mode = PMM_NPS_MODE,
|
|
.flags = ENABLE_PORT1 | NO_OC_PROTECTION,
|
|
};
|
|
|
|
static struct mtd_partition csb726_flash_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.offset = 0,
|
|
.size = CSB726_FLASH_uMON,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
},
|
|
{
|
|
.name = "root",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data csb726_flash_data = {
|
|
.width = 2,
|
|
.parts = csb726_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(csb726_flash_partitions),
|
|
};
|
|
|
|
static struct resource csb726_flash_resources[] = {
|
|
{
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device csb726_flash = {
|
|
.name = "physmap-flash",
|
|
.dev = {
|
|
.platform_data = &csb726_flash_data,
|
|
},
|
|
.resource = csb726_flash_resources,
|
|
.num_resources = ARRAY_SIZE(csb726_flash_resources),
|
|
};
|
|
|
|
static struct resource csb726_sm501_resources[] = {
|
|
{
|
|
.start = PXA_CS4_PHYS,
|
|
.end = PXA_CS4_PHYS + SZ_8M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "sm501-localmem",
|
|
},
|
|
{
|
|
.start = PXA_CS4_PHYS + SZ_64M - SZ_2M,
|
|
.end = PXA_CS4_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "sm501-regs",
|
|
},
|
|
{
|
|
.start = CSB726_IRQ_SM501,
|
|
.end = CSB726_IRQ_SM501,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sm501_initdata csb726_sm501_initdata = {
|
|
/* .devices = SM501_USE_USB_HOST, */
|
|
.devices = SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
|
|
};
|
|
|
|
static struct sm501_platdata csb726_sm501_platdata = {
|
|
.init = &csb726_sm501_initdata,
|
|
};
|
|
|
|
static struct platform_device csb726_sm501 = {
|
|
.name = "sm501",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(csb726_sm501_resources),
|
|
.resource = csb726_sm501_resources,
|
|
.dev = {
|
|
.platform_data = &csb726_sm501_platdata,
|
|
},
|
|
};
|
|
|
|
static struct resource csb726_lan_resources[] = {
|
|
{
|
|
.start = PXA_CS3_PHYS,
|
|
.end = PXA_CS3_PHYS + SZ_64K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = CSB726_IRQ_LAN,
|
|
.end = CSB726_IRQ_LAN,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
},
|
|
};
|
|
|
|
struct smsc911x_platform_config csb726_lan_config = {
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
};
|
|
|
|
|
|
static struct platform_device csb726_lan = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(csb726_lan_resources),
|
|
.resource = csb726_lan_resources,
|
|
.dev = {
|
|
.platform_data = &csb726_lan_config,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&csb726_flash,
|
|
&csb726_sm501,
|
|
&csb726_lan,
|
|
};
|
|
|
|
static void __init csb726_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
|
|
/* __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
|
|
/* __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
|
|
__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
pxa_set_i2c_info(NULL);
|
|
pxa27x_set_i2c_power_info(NULL);
|
|
pxa_set_mci_info(&csb726_mci);
|
|
pxa_set_ohci_info(&csb726_ohci_platform_data);
|
|
pxa_set_ac97_info(NULL);
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
}
|
|
|
|
MACHINE_START(CSB726, "Cogent CSB726")
|
|
.boot_params = 0xa0000100,
|
|
.map_io = pxa27x_map_io,
|
|
.init_irq = pxa27x_init_irq,
|
|
.init_machine = csb726_init,
|
|
.timer = &pxa_timer,
|
|
MACHINE_END
|