mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 03:57:07 +07:00
2d24b532f9
These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
93 lines
2.5 KiB
C
93 lines
2.5 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* m5307.c -- platform support for ColdFire 5307 based boards
|
|
*
|
|
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2000, Lineo (www.lineo.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfwdebug.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
/*
|
|
* Some platforms need software versions of the GPIO data registers.
|
|
*/
|
|
unsigned short ppdata;
|
|
unsigned char ledbank = 0xff;
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(pll, "pll.0", MCF_CLK);
|
|
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
|
|
|
|
struct clk *mcf_clks[] = {
|
|
&clk_pll,
|
|
&clk_sys,
|
|
&clk_mcftmr0,
|
|
&clk_mcftmr1,
|
|
&clk_mcfuart0,
|
|
&clk_mcfuart1,
|
|
&clk_mcfi2c0,
|
|
NULL
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m5307_i2c_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C_IMX)
|
|
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
|
|
MCFSIM_I2CICR);
|
|
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
|
|
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
#if defined(CONFIG_NETtel) || \
|
|
defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
|
|
/* Copy command line from FLASH to local buffer... */
|
|
memcpy(commandp, (char *) 0xf0004000, size);
|
|
commandp[size-1] = 0;
|
|
#endif
|
|
|
|
mach_sched_init = hw_timer_init;
|
|
|
|
/* Only support the external interrupts on their primary level */
|
|
mcf_mapirq2imr(25, MCFINTC_EINT1);
|
|
mcf_mapirq2imr(27, MCFINTC_EINT3);
|
|
mcf_mapirq2imr(29, MCFINTC_EINT5);
|
|
mcf_mapirq2imr(31, MCFINTC_EINT7);
|
|
|
|
#ifdef CONFIG_BDM_DISABLE
|
|
/*
|
|
* Disable the BDM clocking. This also turns off most of the rest of
|
|
* the BDM device. This is good for EMC reasons. This option is not
|
|
* incompatible with the memory protection option.
|
|
*/
|
|
wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
|
|
#endif
|
|
m5307_i2c_init();
|
|
}
|
|
|
|
/***************************************************************************/
|