mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:26:47 +07:00
519ef9b5f2
Currently the function pwm_imx27_get_state() of enables the clocks once unconditionally at the start, a second time if the PWM is enabled and disables unconditionally at the end. Simplify that to enable once at the start and disable conditionally at the end. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
360 lines
8.8 KiB
C
360 lines
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* simple driver for PWM (Pulse Width Modulator) controller
|
|
*
|
|
* Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define MX3_PWMCR 0x00 /* PWM Control Register */
|
|
#define MX3_PWMSR 0x04 /* PWM Status Register */
|
|
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
|
|
#define MX3_PWMPR 0x10 /* PWM Period Register */
|
|
|
|
#define MX3_PWMCR_FWM GENMASK(27, 26)
|
|
#define MX3_PWMCR_STOPEN BIT(25)
|
|
#define MX3_PWMCR_DOZEN BIT(24)
|
|
#define MX3_PWMCR_WAITEN BIT(23)
|
|
#define MX3_PWMCR_DBGEN BIT(22)
|
|
#define MX3_PWMCR_BCTR BIT(21)
|
|
#define MX3_PWMCR_HCTR BIT(20)
|
|
|
|
#define MX3_PWMCR_POUTC GENMASK(19, 18)
|
|
#define MX3_PWMCR_POUTC_NORMAL 0
|
|
#define MX3_PWMCR_POUTC_INVERTED 1
|
|
#define MX3_PWMCR_POUTC_OFF 2
|
|
|
|
#define MX3_PWMCR_CLKSRC GENMASK(17, 16)
|
|
#define MX3_PWMCR_CLKSRC_OFF 0
|
|
#define MX3_PWMCR_CLKSRC_IPG 1
|
|
#define MX3_PWMCR_CLKSRC_IPG_HIGH 2
|
|
#define MX3_PWMCR_CLKSRC_IPG_32K 3
|
|
|
|
#define MX3_PWMCR_PRESCALER GENMASK(15, 4)
|
|
|
|
#define MX3_PWMCR_SWR BIT(3)
|
|
|
|
#define MX3_PWMCR_REPEAT GENMASK(2, 1)
|
|
#define MX3_PWMCR_REPEAT_1X 0
|
|
#define MX3_PWMCR_REPEAT_2X 1
|
|
#define MX3_PWMCR_REPEAT_4X 2
|
|
#define MX3_PWMCR_REPEAT_8X 3
|
|
|
|
#define MX3_PWMCR_EN BIT(0)
|
|
|
|
#define MX3_PWMSR_FWE BIT(6)
|
|
#define MX3_PWMSR_CMP BIT(5)
|
|
#define MX3_PWMSR_ROV BIT(4)
|
|
#define MX3_PWMSR_FE BIT(3)
|
|
|
|
#define MX3_PWMSR_FIFOAV GENMASK(2, 0)
|
|
#define MX3_PWMSR_FIFOAV_EMPTY 0
|
|
#define MX3_PWMSR_FIFOAV_1WORD 1
|
|
#define MX3_PWMSR_FIFOAV_2WORDS 2
|
|
#define MX3_PWMSR_FIFOAV_3WORDS 3
|
|
#define MX3_PWMSR_FIFOAV_4WORDS 4
|
|
|
|
#define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
|
|
#define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \
|
|
(x)) + 1)
|
|
|
|
#define MX3_PWM_SWR_LOOP 5
|
|
|
|
/* PWMPR register value of 0xffff has the same effect as 0xfffe */
|
|
#define MX3_PWMPR_MAX 0xfffe
|
|
|
|
struct pwm_imx27_chip {
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_per;
|
|
void __iomem *mmio_base;
|
|
struct pwm_chip chip;
|
|
};
|
|
|
|
#define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip)
|
|
|
|
static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip)
|
|
{
|
|
struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(imx->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(imx->clk_per);
|
|
if (ret) {
|
|
clk_disable_unprepare(imx->clk_ipg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pwm_imx27_clk_disable_unprepare(struct pwm_chip *chip)
|
|
{
|
|
struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
|
|
|
|
clk_disable_unprepare(imx->clk_per);
|
|
clk_disable_unprepare(imx->clk_ipg);
|
|
}
|
|
|
|
static void pwm_imx27_get_state(struct pwm_chip *chip,
|
|
struct pwm_device *pwm, struct pwm_state *state)
|
|
{
|
|
struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
|
|
u32 period, prescaler, pwm_clk, val;
|
|
u64 tmp;
|
|
int ret;
|
|
|
|
ret = pwm_imx27_clk_prepare_enable(chip);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
val = readl(imx->mmio_base + MX3_PWMCR);
|
|
|
|
if (val & MX3_PWMCR_EN)
|
|
state->enabled = true;
|
|
else
|
|
state->enabled = false;
|
|
|
|
switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
|
|
case MX3_PWMCR_POUTC_NORMAL:
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
break;
|
|
case MX3_PWMCR_POUTC_INVERTED:
|
|
state->polarity = PWM_POLARITY_INVERSED;
|
|
break;
|
|
default:
|
|
dev_warn(chip->dev, "can't set polarity, output disconnected");
|
|
}
|
|
|
|
prescaler = MX3_PWMCR_PRESCALER_GET(val);
|
|
pwm_clk = clk_get_rate(imx->clk_per);
|
|
pwm_clk = DIV_ROUND_CLOSEST_ULL(pwm_clk, prescaler);
|
|
val = readl(imx->mmio_base + MX3_PWMPR);
|
|
period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
|
|
|
|
/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
|
|
tmp = NSEC_PER_SEC * (u64)(period + 2);
|
|
state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
|
|
|
|
/* PWMSAR can be read only if PWM is enabled */
|
|
if (state->enabled) {
|
|
val = readl(imx->mmio_base + MX3_PWMSAR);
|
|
tmp = NSEC_PER_SEC * (u64)(val);
|
|
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
|
|
} else {
|
|
state->duty_cycle = 0;
|
|
}
|
|
|
|
if (!state->enabled)
|
|
pwm_imx27_clk_disable_unprepare(chip);
|
|
}
|
|
|
|
static void pwm_imx27_sw_reset(struct pwm_chip *chip)
|
|
{
|
|
struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
|
|
struct device *dev = chip->dev;
|
|
int wait_count = 0;
|
|
u32 cr;
|
|
|
|
writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
|
|
do {
|
|
usleep_range(200, 1000);
|
|
cr = readl(imx->mmio_base + MX3_PWMCR);
|
|
} while ((cr & MX3_PWMCR_SWR) &&
|
|
(wait_count++ < MX3_PWM_SWR_LOOP));
|
|
|
|
if (cr & MX3_PWMCR_SWR)
|
|
dev_warn(dev, "software reset timeout\n");
|
|
}
|
|
|
|
static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
|
|
struct pwm_device *pwm)
|
|
{
|
|
struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
|
|
struct device *dev = chip->dev;
|
|
unsigned int period_ms;
|
|
int fifoav;
|
|
u32 sr;
|
|
|
|
sr = readl(imx->mmio_base + MX3_PWMSR);
|
|
fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
|
|
if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
|
|
period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
|
|
NSEC_PER_MSEC);
|
|
msleep(period_ms);
|
|
|
|
sr = readl(imx->mmio_base + MX3_PWMSR);
|
|
if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
|
|
dev_warn(dev, "there is no free FIFO slot\n");
|
|
}
|
|
}
|
|
|
|
static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
unsigned long period_cycles, duty_cycles, prescale;
|
|
struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
|
|
struct pwm_state cstate;
|
|
unsigned long long c;
|
|
int ret;
|
|
u32 cr;
|
|
|
|
pwm_get_state(pwm, &cstate);
|
|
|
|
if (state->enabled) {
|
|
c = clk_get_rate(imx->clk_per);
|
|
c *= state->period;
|
|
|
|
do_div(c, 1000000000);
|
|
period_cycles = c;
|
|
|
|
prescale = period_cycles / 0x10000 + 1;
|
|
|
|
period_cycles /= prescale;
|
|
c = (unsigned long long)period_cycles * state->duty_cycle;
|
|
do_div(c, state->period);
|
|
duty_cycles = c;
|
|
|
|
/*
|
|
* according to imx pwm RM, the real period value should be
|
|
* PERIOD value in PWMPR plus 2.
|
|
*/
|
|
if (period_cycles > 2)
|
|
period_cycles -= 2;
|
|
else
|
|
period_cycles = 0;
|
|
|
|
/*
|
|
* Wait for a free FIFO slot if the PWM is already enabled, and
|
|
* flush the FIFO if the PWM was disabled and is about to be
|
|
* enabled.
|
|
*/
|
|
if (cstate.enabled) {
|
|
pwm_imx27_wait_fifo_slot(chip, pwm);
|
|
} else {
|
|
ret = pwm_imx27_clk_prepare_enable(chip);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pwm_imx27_sw_reset(chip);
|
|
}
|
|
|
|
writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
|
|
writel(period_cycles, imx->mmio_base + MX3_PWMPR);
|
|
|
|
cr = MX3_PWMCR_PRESCALER_SET(prescale) |
|
|
MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
|
|
FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
|
|
MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
|
|
|
|
if (state->polarity == PWM_POLARITY_INVERSED)
|
|
cr |= FIELD_PREP(MX3_PWMCR_POUTC,
|
|
MX3_PWMCR_POUTC_INVERTED);
|
|
|
|
writel(cr, imx->mmio_base + MX3_PWMCR);
|
|
} else if (cstate.enabled) {
|
|
writel(0, imx->mmio_base + MX3_PWMCR);
|
|
|
|
pwm_imx27_clk_disable_unprepare(chip);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops pwm_imx27_ops = {
|
|
.apply = pwm_imx27_apply,
|
|
.get_state = pwm_imx27_get_state,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id pwm_imx27_dt_ids[] = {
|
|
{ .compatible = "fsl,imx27-pwm", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
|
|
|
|
static int pwm_imx27_probe(struct platform_device *pdev)
|
|
{
|
|
struct pwm_imx27_chip *imx;
|
|
struct resource *r;
|
|
|
|
imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
|
|
if (imx == NULL)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, imx);
|
|
|
|
imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(imx->clk_ipg)) {
|
|
dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
|
|
PTR_ERR(imx->clk_ipg));
|
|
return PTR_ERR(imx->clk_ipg);
|
|
}
|
|
|
|
imx->clk_per = devm_clk_get(&pdev->dev, "per");
|
|
if (IS_ERR(imx->clk_per)) {
|
|
int ret = PTR_ERR(imx->clk_per);
|
|
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(&pdev->dev,
|
|
"failed to get peripheral clock: %d\n",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
imx->chip.ops = &pwm_imx27_ops;
|
|
imx->chip.dev = &pdev->dev;
|
|
imx->chip.base = -1;
|
|
imx->chip.npwm = 1;
|
|
|
|
imx->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
imx->chip.of_pwm_n_cells = 3;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
|
|
if (IS_ERR(imx->mmio_base))
|
|
return PTR_ERR(imx->mmio_base);
|
|
|
|
return pwmchip_add(&imx->chip);
|
|
}
|
|
|
|
static int pwm_imx27_remove(struct platform_device *pdev)
|
|
{
|
|
struct pwm_imx27_chip *imx;
|
|
|
|
imx = platform_get_drvdata(pdev);
|
|
|
|
pwm_imx27_clk_disable_unprepare(&imx->chip);
|
|
|
|
return pwmchip_remove(&imx->chip);
|
|
}
|
|
|
|
static struct platform_driver imx_pwm_driver = {
|
|
.driver = {
|
|
.name = "pwm-imx27",
|
|
.of_match_table = pwm_imx27_dt_ids,
|
|
},
|
|
.probe = pwm_imx27_probe,
|
|
.remove = pwm_imx27_remove,
|
|
};
|
|
module_platform_driver(imx_pwm_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
|