AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-30 07:16:43 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
55b61fec22
linux_dsm_epyc7002/drivers/serial/68360serial.c
Alan Cox 606d099cdd [PATCH] tty: switch to ktermios 
This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:57 -08:00

2996 lines
75 KiB
C
Raw Blame History

/*
* UART driver for 68360 CPM SCC or SMC
* Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>,
* Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca>
* Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
*
* I used the serial.c driver as the framework for this driver.
* Give credit to those guys.
* The original code was written for the MBX860 board. I tried to make
* it generic, but there may be some assumptions in the structures that
* have to be fixed later.
* To save porting time, I did not bother to change any object names
* that are not accessed outside of this file.
* It still needs lots of work........When it was easy, I included code
* to support the SCCs, but this has never been tested, nor is it complete.
* Only the SCCs support modem control, so that is not complete either.
*
* This module exports the following rs232 io functions:
*
* int rs_360_init(void);
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/irq.h>
#include <asm/m68360.h>
#include <asm/commproc.h>
#ifdef CONFIG_KGDB
extern void breakpoint(void);
extern void set_debug_traps(void);
extern int kgdb_output_string (const char* s, unsigned int count);
#endif
/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */
#include <linux/console.h>
/* this defines the index into rs_table for the port to use
*/
#ifndef CONFIG_SERIAL_CONSOLE_PORT
#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */
#endif
/* #endif */
#if 0
/* SCC2 for console
*/
#undef CONFIG_SERIAL_CONSOLE_PORT
#define CONFIG_SERIAL_CONSOLE_PORT 2
#endif
#define TX_WAKEUP ASYNC_SHARE_IRQ
static char *serial_name = "CPM UART driver";
static char *serial_version = "0.03";
static struct tty_driver *serial_driver;
int serial_console_setup(struct console *co, char *options);
/*
* Serial driver configuration section. Here are the various options:
*/
#define SERIAL_PARANOIA_CHECK
#define CONFIG_SERIAL_NOPAUSE_IO
#define SERIAL_DO_RESTART
/* Set of debugging defines */
#undef SERIAL_DEBUG_INTR
#undef SERIAL_DEBUG_OPEN
#undef SERIAL_DEBUG_FLOW
#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
#define _INLINE_ inline
#define DBG_CNT(s)
/* We overload some of the items in the data structure to meet our
* needs. For example, the port address is the CPM parameter ram
* offset for the SCC or SMC. The maximum number of ports is 4 SCCs and
* 2 SMCs. The "hub6" field is used to indicate the channel number, with
* a flag indicating SCC or SMC, and the number is used as an index into
* the CPM parameter area for this device.
* The "type" field is currently set to 0, for PORT_UNKNOWN. It is
* not currently used. I should probably use it to indicate the port
* type of SMC or SCC.
* The SMCs do not support any modem control signals.
*/
#define smc_scc_num hub6
#define NUM_IS_SCC ((int)0x00010000)
#define PORT_NUM(P) ((P) & 0x0000ffff)
#if defined (CONFIG_UCQUICC)
volatile extern void *_periph_base;
/* sipex transceiver
* mode bits for are on pins
*
* SCC2 d16..19
* SCC3 d20..23
* SCC4 d24..27
*/
#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1)))
static uint sipex_mode_bits = 0x00000000;
#endif
/* There is no `serial_state' defined back here in 2.0.
* Try to get by with serial_struct
*/
/* #define serial_state serial_struct */
/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few
* extras: */
#if 0
struct async_icount_24 {
__u32 cts, dsr, rng, dcd, tx, rx;
__u32 frame, parity, overrun, brk;
__u32 buf_overrun;
} icount;
#endif
#if 0
struct serial_state {
int magic;
int baud_base;
unsigned long port;
int irq;
int flags;
int hub6;
int type;
int line;
int revision; /* Chip revision (950) */
int xmit_fifo_size;
int custom_divisor;
int count;
u8 *iomem_base;
u16 iomem_reg_shift;
unsigned short close_delay;
unsigned short closing_wait; /* time to wait before closing */
struct async_icount_24 icount;
int io_type;
struct async_struct *info;
};
#endif
#define SSTATE_MAGIC 0x5302
/* SMC2 is sometimes used for low performance TDM interfaces. Define
* this as 1 if you want SMC2 as a serial port UART managed by this driver.
* Define this as 0 if you wish to use SMC2 for something else.
*/
#define USE_SMC2 1
#if 0
/* Define SCC to ttySx mapping. */
#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */
/* Define which SCC is the first one to use for a serial port. These
* are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used
* for Ethernet, and the first available SCC for serial UART is SCC2.
* NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and
* interrupt vectors in the table below to match.
*/
#define SCC_IDX_BASE 1 /* table index */
#endif
/* Processors other than the 860 only get SMCs configured by default.
* Either they don't have SCCs or they are allocated somewhere else.
* Of course, there are now 860s without some SCCs, so we will need to
* address that someday.
* The Embedded Planet Multimedia I/O cards use TDM interfaces to the
* stereo codec parts, and we use SMC2 to help support that.
*/
static struct serial_state rs_table[] = {
/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */
{ 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */
#if USE_SMC2
,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */
#endif
#if defined(CONFIG_SERIAL_68360_SCC)
,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */
,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */
,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */
#endif
};
#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
/* The number of buffer descriptors and their sizes.
*/
#define RX_NUM_FIFO 4
#define RX_BUF_SIZE 32
#define TX_NUM_FIFO 4
#define TX_BUF_SIZE 32
#define CONSOLE_NUM_FIFO 2
#define CONSOLE_BUF_SIZE 4
char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE];
/* The async_struct in serial.h does not really give us what we
* need, so define our own here.
*/
typedef struct serial_info {
int magic;
int flags;
struct serial_state *state;
/* struct serial_struct *state; */
/* struct async_struct *state; */
struct tty_struct *tty;
int read_status_mask;
int ignore_status_mask;
int timeout;
int line;
int x_char; /* xon/xoff character */
int close_delay;
unsigned short closing_wait;
unsigned short closing_wait2;
unsigned long event;
unsigned long last_active;
int blocked_open; /* # of blocked opens */
struct work_struct tqueue;
struct work_struct tqueue_hangup;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
/* CPM Buffer Descriptor pointers.
*/
QUICC_BD *rx_bd_base;
QUICC_BD *rx_cur;
QUICC_BD *tx_bd_base;
QUICC_BD *tx_cur;
} ser_info_t;
/* since kmalloc_init() does not get called until much after this initialization: */
static ser_info_t quicc_ser_info[NR_PORTS];
static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE];
static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE];
static void change_speed(ser_info_t *info);
static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout);
static inline int serial_paranoia_check(ser_info_t *info,
char *name, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
static const char *badmagic =
"Warning: bad magic number for serial struct (%s) in %s\n";
static const char *badinfo =
"Warning: null async_struct for (%s) in %s\n";
if (!info) {
printk(badinfo, name, routine);
return 1;
}
if (info->magic != SERIAL_MAGIC) {
printk(badmagic, name, routine);
return 1;
}
#endif
return 0;
}
/*
* This is used to figure out the divisor speeds and the timeouts,
* indexed by the termio value. The generic CPM functions are responsible
* for setting and assigning baud rate generators for us.
*/
static int baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 };
/* This sucks. There is a better way: */
#if defined(CONFIG_CONSOLE_9600)
#define CONSOLE_BAUDRATE 9600
#elif defined(CONFIG_CONSOLE_19200)
#define CONSOLE_BAUDRATE 19200
#elif defined(CONFIG_CONSOLE_115200)
#define CONSOLE_BAUDRATE 115200
#else
#warning "console baud rate undefined"
#define CONSOLE_BAUDRATE 9600
#endif
/*
* ------------------------------------------------------------
* rs_stop() and rs_start()
*
* This routines are called before setting or resetting tty->stopped.
* They enable or disable transmitter interrupts, as necessary.
* ------------------------------------------------------------
*/
static void rs_360_stop(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
int idx;
unsigned long flags;
volatile struct scc_regs *sccp;
volatile struct smc_regs *smcp;
if (serial_paranoia_check(info, tty->name, "rs_stop"))
return;
local_irq_save(flags);
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_sccm &= ~UART_SCCM_TX;
} else {
/* smcp = &cpmp->cp_smc[idx]; */
smcp = &pquicc->smc_regs[idx];
smcp->smc_smcm &= ~SMCM_TX;
}
local_irq_restore(flags);
}
static void rs_360_start(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
int idx;
unsigned long flags;
volatile struct scc_regs *sccp;
volatile struct smc_regs *smcp;
if (serial_paranoia_check(info, tty->name, "rs_stop"))
return;
local_irq_save(flags);
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_sccm |= UART_SCCM_TX;
} else {
smcp = &pquicc->smc_regs[idx];
smcp->smc_smcm |= SMCM_TX;
}
local_irq_restore(flags);
}
/*
* ----------------------------------------------------------------------
*
* Here starts the interrupt handling routines. All of the following
* subroutines are declared as inline and are folded into
* rs_interrupt(). They were separated out for readability's sake.
*
* Note: rs_interrupt() is a "fast" interrupt, which means that it
* runs with interrupts turned off. People who may want to modify
* rs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
*
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
*
* and look at the resulting assemble code in serial.s.
*
* - Ted Ts'o (tytso@mit.edu), 7-Mar-93
* -----------------------------------------------------------------------
*/
static _INLINE_ void receive_chars(ser_info_t *info)
{
struct tty_struct *tty = info->tty;
unsigned char ch, flag, *cp;
/*int ignored = 0;*/
int i;
ushort status;
struct async_icount *icount;
/* struct async_icount_24 *icount; */
volatile QUICC_BD *bdp;
icount = &info->state->icount;
/* Just loop through the closed BDs and copy the characters into
* the buffer.
*/
bdp = info->rx_cur;
for (;;) {
if (bdp->status & BD_SC_EMPTY) /* If this one is empty */
break; /* we are all done */
/* The read status mask tell us what we should do with
* incoming characters, especially if errors occur.
* One special case is the use of BD_SC_EMPTY. If
* this is not set, we are supposed to be ignoring
* inputs. In this case, just mark the buffer empty and
* continue.
*/
if (!(info->read_status_mask & BD_SC_EMPTY)) {
bdp->status |= BD_SC_EMPTY;
bdp->status &=
~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
if (bdp->status & BD_SC_WRAP)
bdp = info->rx_bd_base;
else
bdp++;
continue;
}
/* Get the number of characters and the buffer pointer.
*/
i = bdp->length;
/* cp = (unsigned char *)__va(bdp->buf); */
cp = (char *)bdp->buf;
status = bdp->status;
while (i-- > 0) {
ch = *cp++;
icount->rx++;
#ifdef SERIAL_DEBUG_INTR
printk("DR%02x:%02x...", ch, status);
#endif
flag = TTY_NORMAL;
if (status & (BD_SC_BR | BD_SC_FR |
BD_SC_PR | BD_SC_OV)) {
/*
* For statistics only
*/
if (status & BD_SC_BR)
icount->brk++;
else if (status & BD_SC_PR)
icount->parity++;
else if (status & BD_SC_FR)
icount->frame++;
if (status & BD_SC_OV)
icount->overrun++;
/*
* Now check to see if character should be
* ignored, and mask off conditions which
* should be ignored.
if (status & info->ignore_status_mask) {
if (++ignored > 100)
break;
continue;
}
*/
status &= info->read_status_mask;
if (status & (BD_SC_BR)) {
#ifdef SERIAL_DEBUG_INTR
printk("handling break....");
#endif
*tty->flip.flag_buf_ptr = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & BD_SC_PR)
flag = TTY_PARITY;
else if (status & BD_SC_FR)
flag = TTY_FRAME;
}
tty_insert_flip_char(tty, ch, flag);
if (status & BD_SC_OV)
/*
* Overrun is special, since it's
* reported immediately, and doesn't
* affect the current character
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
/* This BD is ready to be used again. Clear status.
* Get next BD.
*/
bdp->status |= BD_SC_EMPTY;
bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
if (bdp->status & BD_SC_WRAP)
bdp = info->rx_bd_base;
else
bdp++;
}
info->rx_cur = (QUICC_BD *)bdp;
tty_schedule_flip(tty);
}
static _INLINE_ void receive_break(ser_info_t *info)
{
struct tty_struct *tty = info->tty;
info->state->icount.brk++;
/* Check to see if there is room in the tty buffer for
* the break. If not, we exit now, losing the break. FIXME
*/
tty_insert_flip_char(tty, 0, TTY_BREAK);
tty_schedule_flip(tty);
}
static _INLINE_ void transmit_chars(ser_info_t *info)
{
if ((info->flags & TX_WAKEUP) ||
(info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
schedule_work(&info->tqueue);
}
#ifdef SERIAL_DEBUG_INTR
printk("THRE...");
#endif
}
#ifdef notdef
/* I need to do this for the SCCs, so it is left as a reminder.
*/
static _INLINE_ void check_modem_status(struct async_struct *info)
{
int status;
/* struct async_icount *icount; */
struct async_icount_24 *icount;
status = serial_in(info, UART_MSR);
if (status & UART_MSR_ANY_DELTA) {
icount = &info->state->icount;
/* update input line counters */
if (status & UART_MSR_TERI)
icount->rng++;
if (status & UART_MSR_DDSR)
icount->dsr++;
if (status & UART_MSR_DDCD) {
icount->dcd++;
#ifdef CONFIG_HARD_PPS
if ((info->flags & ASYNC_HARDPPS_CD) &&
(status & UART_MSR_DCD))
hardpps();
#endif
}
if (status & UART_MSR_DCTS)
icount->cts++;
wake_up_interruptible(&info->delta_msr_wait);
}
if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
printk("ttys%d CD now %s...", info->line,
(status & UART_MSR_DCD) ? "on" : "off");
#endif
if (status & UART_MSR_DCD)
wake_up_interruptible(&info->open_wait);
else {
#ifdef SERIAL_DEBUG_OPEN
printk("scheduling hangup...");
#endif
queue_task(&info->tqueue_hangup,
&tq_scheduler);
}
}
if (info->flags & ASYNC_CTS_FLOW) {
if (info->tty->hw_stopped) {
if (status & UART_MSR_CTS) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx start...");
#endif
info->tty->hw_stopped = 0;
info->IER |= UART_IER_THRI;
serial_out(info, UART_IER, info->IER);
rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
return;
}
} else {
if (!(status & UART_MSR_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx stop...");
#endif
info->tty->hw_stopped = 1;
info->IER &= ~UART_IER_THRI;
serial_out(info, UART_IER, info->IER);
}
}
}
}
#endif
/*
* This is the serial driver's interrupt routine for a single port
*/
/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
static void rs_360_interrupt(int vec, void *dev_id)
{
u_char events;
int idx;
ser_info_t *info;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
info = dev_id;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
events = sccp->scc_scce;
if (events & SCCM_RX)
receive_chars(info);
if (events & SCCM_TX)
transmit_chars(info);
sccp->scc_scce = events;
} else {
smcp = &pquicc->smc_regs[idx];
events = smcp->smc_smce;
if (events & SMCM_BRKE)
receive_break(info);
if (events & SMCM_RX)
receive_chars(info);
if (events & SMCM_TX)
transmit_chars(info);
smcp->smc_smce = events;
}
#ifdef SERIAL_DEBUG_INTR
printk("rs_interrupt_single(%d, %x)...",
info->state->smc_scc_num, events);
#endif
#ifdef modem_control
check_modem_status(info);
#endif
info->last_active = jiffies;
#ifdef SERIAL_DEBUG_INTR
printk("end.\n");
#endif
}
/*
* -------------------------------------------------------------------
* Here ends the serial interrupt routines.
* -------------------------------------------------------------------
*/
static void do_softint(void *private_)
{
ser_info_t *info = (ser_info_t *) private_;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
tty_wakeup(tty);
}
/*
* This routine is called from the scheduler tqueue when the interrupt
* routine has signalled that a hangup has occurred. The path of
* hangup processing is:
*
* serial interrupt routine -> (scheduler tqueue) ->
* do_serial_hangup() -> tty->hangup() -> rs_hangup()
*
*/
static void do_serial_hangup(void *private_)
{
struct async_struct *info = (struct async_struct *) private_;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
tty_hangup(tty);
}
static int startup(ser_info_t *info)
{
unsigned long flags;
int retval=0;
int idx;
/*struct serial_state *state = info->state;*/
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
volatile struct smc_uart_pram *up;
volatile struct uart_pram *scup;
local_irq_save(flags);
if (info->flags & ASYNC_INITIALIZED) {
goto errout;
}
#ifdef maybe
if (!state->port || !state->type) {
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
goto errout;
}
#endif
#ifdef SERIAL_DEBUG_OPEN
printk("starting up ttys%d (irq %d)...", info->line, state->irq);
#endif
#ifdef modem_control
info->MCR = 0;
if (info->tty->termios->c_cflag & CBAUD)
info->MCR = UART_MCR_DTR | UART_MCR_RTS;
#endif
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
/*
* and set the speed of the serial port
*/
change_speed(info);
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
scup = &pquicc->pram[info->state->port].scc.pscc.u;
scup->mrblr = RX_BUF_SIZE;
scup->max_idl = RX_BUF_SIZE;
sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX);
sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
} else {
smcp = &pquicc->smc_regs[idx];
/* Enable interrupts and I/O.
*/
smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
/* We can tune the buffer length and idle characters
* to take advantage of the entire incoming buffer size.
* If mrblr is something other than 1, maxidl has to be
* non-zero or we never get an interrupt. The maxidl
* is the number of character times we wait after reception
* of the last character before we decide no more characters
* are coming.
*/
/* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */
/* holy unionized structures, Batman: */
up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
up->mrblr = RX_BUF_SIZE;
up->max_idl = RX_BUF_SIZE;
up->brkcr = 1; /* number of break chars */
}
info->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
errout:
local_irq_restore(flags);
return retval;
}
/*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
static void shutdown(ser_info_t *info)
{
unsigned long flags;
struct serial_state *state;
int idx;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
if (!(info->flags & ASYNC_INITIALIZED))
return;
state = info->state;
#ifdef SERIAL_DEBUG_OPEN
printk("Shutting down serial port %d (irq %d)....", info->line,
state->irq);
#endif
local_irq_save(flags);
idx = PORT_NUM(state->smc_scc_num);
if (state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#ifdef CONFIG_SERIAL_CONSOLE
/* We can't disable the transmitter if this is the
* system console.
*/
if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
#endif
sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
} else {
smcp = &pquicc->smc_regs[idx];
/* Disable interrupts and I/O.
*/
smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
#ifdef CONFIG_SERIAL_CONSOLE
/* We can't disable the transmitter if this is the
* system console.
*/
if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
#endif
smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
}
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
/*
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
static void change_speed(ser_info_t *info)
{
int baud_rate;
unsigned cflag, cval, scval, prev_mode;
int i, bits, sbits, idx;
unsigned long flags;
struct serial_state *state;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
if (!info->tty || !info->tty->termios)
return;
cflag = info->tty->termios->c_cflag;
state = info->state;
/* Character length programmed into the mode register is the
* sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
* 1 or 2 stop bits, minus 1.
* The value 'bits' counts this for us.
*/
cval = 0;
scval = 0;
/* byte size and parity */
switch (cflag & CSIZE) {
case CS5: bits = 5; break;
case CS6: bits = 6; break;
case CS7: bits = 7; break;
case CS8: bits = 8; break;
/* Never happens, but GCC is too dumb to figure it out */
default: bits = 8; break;
}
sbits = bits - 5;
if (cflag & CSTOPB) {
cval |= SMCMR_SL; /* Two stops */
scval |= SCU_PMSR_SL;
bits++;
}
if (cflag & PARENB) {
cval |= SMCMR_PEN;
scval |= SCU_PMSR_PEN;
bits++;
}
if (!(cflag & PARODD)) {
cval |= SMCMR_PM_EVEN;
scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP);
}
/* Determine divisor based on baud rate */
i = cflag & CBAUD;
if (i >= (sizeof(baud_table)/sizeof(int)))
baud_rate = 9600;
else
baud_rate = baud_table[i];
info->timeout = (TX_BUF_SIZE*HZ*bits);
info->timeout += HZ/50; /* Add .02 seconds of slop */
#ifdef modem_control
/* CTS flow control flag and modem status interrupts */
info->IER &= ~UART_IER_MSI;
if (info->flags & ASYNC_HARDPPS_CD)
info->IER |= UART_IER_MSI;
if (cflag & CRTSCTS) {
info->flags |= ASYNC_CTS_FLOW;
info->IER |= UART_IER_MSI;
} else
info->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
info->flags &= ~ASYNC_CHECK_CD;
else {
info->flags |= ASYNC_CHECK_CD;
info->IER |= UART_IER_MSI;
}
serial_out(info, UART_IER, info->IER);
#endif
/*
* Set up parity check flag
*/
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
if (I_INPCK(info->tty))
info->read_status_mask |= BD_SC_FR | BD_SC_PR;
if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
info->read_status_mask |= BD_SC_BR;
/*
* Characters to ignore
*/
info->ignore_status_mask = 0;
if (I_IGNPAR(info->tty))
info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
if (I_IGNBRK(info->tty)) {
info->ignore_status_mask |= BD_SC_BR;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(info->tty))
info->ignore_status_mask |= BD_SC_OV;
}
/*
* !!! ignore all characters if CREAD is not set
*/
if ((cflag & CREAD) == 0)
info->read_status_mask &= ~BD_SC_EMPTY;
local_irq_save(flags);
/* Start bit has not been added (so don't, because we would just
* subtract it later), and we need to add one for the number of
* stops bits (there is always at least one).
*/
bits++;
idx = PORT_NUM(state->smc_scc_num);
if (state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_psmr = (sbits << 12) | scval;
} else {
smcp = &pquicc->smc_regs[idx];
/* Set the mode register. We want to keep a copy of the
* enables, because we want to put them back if they were
* present.
*/
prev_mode = smcp->smc_smcmr;
smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
}
m360_cpm_setbrg((state - rs_table), baud_rate);
local_irq_restore(flags);
}
static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
volatile QUICC_BD *bdp;
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
return;
if (!tty)
return;
bdp = info->tx_cur;
while (bdp->status & BD_SC_READY);
/* *((char *)__va(bdp->buf)) = ch; */
*((char *)bdp->buf) = ch;
bdp->length = 1;
bdp->status |= BD_SC_READY;
/* Get next BD.
*/
if (bdp->status & BD_SC_WRAP)
bdp = info->tx_bd_base;
else
bdp++;
info->tx_cur = (QUICC_BD *)bdp;
}
static int rs_360_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
int c, ret = 0;
ser_info_t *info = (ser_info_t *)tty->driver_data;
volatile QUICC_BD *bdp;
#ifdef CONFIG_KGDB
/* Try to let stub handle output. Returns true if it did. */
if (kgdb_output_string(buf, count))
return ret;
#endif
if (serial_paranoia_check(info, tty->name, "rs_write"))
return 0;
if (!tty)
return 0;
bdp = info->tx_cur;
while (1) {
c = min(count, TX_BUF_SIZE);
if (c <= 0)
break;
if (bdp->status & BD_SC_READY) {
info->flags |= TX_WAKEUP;
break;
}
/* memcpy(__va(bdp->buf), buf, c); */
memcpy((void *)bdp->buf, buf, c);
bdp->length = c;
bdp->status |= BD_SC_READY;
buf += c;
count -= c;
ret += c;
/* Get next BD.
*/
if (bdp->status & BD_SC_WRAP)
bdp = info->tx_bd_base;
else
bdp++;
info->tx_cur = (QUICC_BD *)bdp;
}
return ret;
}
static int rs_360_write_room(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
int ret;
if (serial_paranoia_check(info, tty->name, "rs_write_room"))
return 0;
if ((info->tx_cur->status & BD_SC_READY) == 0) {
info->flags &= ~TX_WAKEUP;
ret = TX_BUF_SIZE;
}
else {
info->flags |= TX_WAKEUP;
ret = 0;
}
return ret;
}
/* I could track this with transmit counters....maybe later.
*/
static int rs_360_chars_in_buffer(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
return 0;
return 0;
}
static void rs_360_flush_buffer(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
/* There is nothing to "flush", whatever we gave the CPM
* is on its way out.
*/
tty_wakeup(tty);
info->flags &= ~TX_WAKEUP;
}
/*
* This function is used to send a high-priority XON/XOFF character to
* the device
*/
static void rs_360_send_xchar(struct tty_struct *tty, char ch)
{
volatile QUICC_BD *bdp;
ser_info_t *info = (ser_info_t *)tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_send_char"))
return;
bdp = info->tx_cur;
while (bdp->status & BD_SC_READY);
/* *((char *)__va(bdp->buf)) = ch; */
*((char *)bdp->buf) = ch;
bdp->length = 1;
bdp->status |= BD_SC_READY;
/* Get next BD.
*/
if (bdp->status & BD_SC_WRAP)
bdp = info->tx_bd_base;
else
bdp++;
info->tx_cur = (QUICC_BD *)bdp;
}
/*
* ------------------------------------------------------------
* rs_throttle()
*
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
static void rs_360_throttle(struct tty_struct * tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
printk("throttle %s: %d....\n", _tty_name(tty, buf),
tty->ldisc.chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_throttle"))
return;
if (I_IXOFF(tty))
rs_360_send_xchar(tty, STOP_CHAR(tty));
#ifdef modem_control
if (tty->termios->c_cflag & CRTSCTS)
info->MCR &= ~UART_MCR_RTS;
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
#endif
}
static void rs_360_unthrottle(struct tty_struct * tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
tty->ldisc.chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
return;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
rs_360_send_xchar(tty, START_CHAR(tty));
}
#ifdef modem_control
if (tty->termios->c_cflag & CRTSCTS)
info->MCR |= UART_MCR_RTS;
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
#endif
}
/*
* ------------------------------------------------------------
* rs_ioctl() and friends
* ------------------------------------------------------------
*/
#ifdef maybe
/*
* get_lsr_info - get line status register info
*
* Purpose: Let user call ioctl() to get info when the UART physically
* is emptied. On bus types like RS485, the transmitter must
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
static int get_lsr_info(struct async_struct * info, unsigned int *value)
{
unsigned char status;
unsigned int result;
local_irq_disable();
status = serial_in(info, UART_LSR);
local_irq_enable();
result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
return put_user(result,value);
}
#endif
static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
unsigned int result = 0;
#ifdef modem_control
unsigned char control, status;
if (serial_paranoia_check(info, tty->name, __FUNCTION__))
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
control = info->MCR;
local_irq_disable();
status = serial_in(info, UART_MSR);
local_irq_enable();
result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
#ifdef TIOCM_OUT1
| ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
| ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
#endif
| ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
| ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
| ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
| ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
#endif
return result;
}
static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
#ifdef modem_control
ser_info_t *info = (ser_info_t *)tty->driver_data;
unsigned int arg;
if (serial_paranoia_check(info, tty->name, __FUNCTION__))
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
if (set & TIOCM_RTS)
info->mcr |= UART_MCR_RTS;
if (set & TIOCM_DTR)
info->mcr |= UART_MCR_DTR;
if (clear & TIOCM_RTS)
info->MCR &= ~UART_MCR_RTS;
if (clear & TIOCM_DTR)
info->MCR &= ~UART_MCR_DTR;
#ifdef TIOCM_OUT1
if (set & TIOCM_OUT1)
info->MCR |= UART_MCR_OUT1;
if (set & TIOCM_OUT2)
info->MCR |= UART_MCR_OUT2;
if (clear & TIOCM_OUT1)
info->MCR &= ~UART_MCR_OUT1;
if (clear & TIOCM_OUT2)
info->MCR &= ~UART_MCR_OUT2;
#endif
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
#endif
return 0;
}
/* Sending a break is a two step process on the SMC/SCC. It is accomplished
* by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT
* command. We take advantage of the begin/end functions to make this
* happen.
*/
static ushort smc_chan_map[] = {
CPM_CR_CH_SMC1,
CPM_CR_CH_SMC2
};
static ushort scc_chan_map[] = {
CPM_CR_CH_SCC1,
CPM_CR_CH_SCC2,
CPM_CR_CH_SCC3,
CPM_CR_CH_SCC4
};
static void begin_break(ser_info_t *info)
{
volatile QUICC *cp;
ushort chan;
int idx;
cp = pquicc;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC)
chan = scc_chan_map[idx];
else
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
}
static void end_break(ser_info_t *info)
{
volatile QUICC *cp;
ushort chan;
int idx;
cp = pquicc;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC)
chan = scc_chan_map[idx];
else
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
}
/*
* This routine sends a break character out the serial port.
*/
static void send_break(ser_info_t *info, unsigned int duration)
{
#ifdef SERIAL_DEBUG_SEND_BREAK
printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
#endif
begin_break(info);
msleep_interruptible(duration);
end_break(info);
#ifdef SERIAL_DEBUG_SEND_BREAK
printk("done jiffies=%lu\n", jiffies);
#endif
}
static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
int error;
ser_info_t *info = (ser_info_t *)tty->driver_data;
int retval;
struct async_icount cnow;
/* struct async_icount_24 cnow;*/ /* kernel counter temps */
struct serial_icounter_struct *p_cuser; /* user space */
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
return -ENODEV;
if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
if (!arg) {
send_break(info, 250); /* 1/4 second */
if (signal_pending(current))
return -EINTR;
}
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
send_break(info, arg ? arg*100 : 250);
if (signal_pending(current))
return -EINTR;
return 0;
case TIOCSBRK:
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
begin_break(info);
return 0;
case TIOCCBRK:
retval = tty_check_change(tty);
if (retval)
return retval;
end_break(info);
return 0;
case TIOCGSOFTCAR:
/* return put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg); */
put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg);
return 0;
case TIOCSSOFTCAR:
error = get_user(arg, (unsigned int *) arg);
if (error)
return error;
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
return 0;
#ifdef maybe
case TIOCSERGETLSR: /* Get line status register */
return get_lsr_info(info, (unsigned int *) arg);
#endif
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
*/
case TIOCMIWAIT:
#ifdef modem_control
local_irq_disable();
/* note the counters on entry */
cprev = info->state->icount;
local_irq_enable();
while (1) {
interruptible_sleep_on(&info->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
local_irq_disable();
cnow = info->state->icount; /* atomic copy */
local_irq_enable();
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
return -EIO; /* no change => error */
if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
return 0;
}
cprev = cnow;
}
/* NOTREACHED */
#else
return 0;
#endif
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
local_irq_disable();
cnow = info->state->icount;
local_irq_enable();
p_cuser = (struct serial_icounter_struct *) arg;
/* error = put_user(cnow.cts, &p_cuser->cts); */
/* if (error) return error; */
/* error = put_user(cnow.dsr, &p_cuser->dsr); */
/* if (error) return error; */
/* error = put_user(cnow.rng, &p_cuser->rng); */
/* if (error) return error; */
/* error = put_user(cnow.dcd, &p_cuser->dcd); */
/* if (error) return error; */
put_user(cnow.cts, &p_cuser->cts);
put_user(cnow.dsr, &p_cuser->dsr);
put_user(cnow.rng, &p_cuser->rng);
put_user(cnow.dcd, &p_cuser->dcd);
return 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}
/* FIX UP modem control here someday......
*/
static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
if ( (tty->termios->c_cflag == old_termios->c_cflag)
&& ( RELEVANT_IFLAG(tty->termios->c_iflag)
== RELEVANT_IFLAG(old_termios->c_iflag)))
return;
change_speed(info);
#ifdef modem_control
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) &&
!(tty->termios->c_cflag & CBAUD)) {
info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
}
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
(tty->termios->c_cflag & CBAUD)) {
info->MCR |= UART_MCR_DTR;
if (!tty->hw_stopped ||
!(tty->termios->c_cflag & CRTSCTS)) {
info->MCR |= UART_MCR_RTS;
}
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
}
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_360_start(tty);
}
#endif
#if 0
/*
* No need to wake up processes in open wait, since they
* sample the CLOCAL flag once, and don't recheck it.
* XXX It's not clear whether the current behavior is correct
* or not. Hence, this may change.....
*/
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
wake_up_interruptible(&info->open_wait);
#endif
}
/*
* ------------------------------------------------------------
* rs_close()
*
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* async structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
* ------------------------------------------------------------
*/
static void rs_360_close(struct tty_struct *tty, struct file * filp)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
/* struct async_state *state; */
struct serial_state *state;
unsigned long flags;
int idx;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
return;
state = info->state;
local_irq_save(flags);
if (tty_hung_up_p(filp)) {
DBG_CNT("before DEC-hung");
local_irq_restore(flags);
return;
}
#ifdef SERIAL_DEBUG_OPEN
printk("rs_close ttys%d, count = %d\n", info->line, state->count);
#endif
if ((tty->count == 1) && (state->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. state->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk("rs_close: bad serial port count; tty->count is 1, "
"state->count is %d\n", state->count);
state->count = 1;
}
if (--state->count < 0) {
printk("rs_close: bad serial port count for ttys%d: %d\n",
info->line, state->count);
state->count = 0;
}
if (state->count) {
DBG_CNT("before DEC-2");
local_irq_restore(flags);
return;
}
info->flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
info->read_status_mask &= ~BD_SC_EMPTY;
if (info->flags & ASYNC_INITIALIZED) {
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_sccm &= ~UART_SCCM_RX;
sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR;
} else {
smcp = &pquicc->smc_regs[idx];
smcp->smc_smcm &= ~SMCM_RX;
smcp->smc_smcmr &= ~SMCMR_REN;
}
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
rs_360_wait_until_sent(tty, info->timeout);
}
shutdown(info);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
if (info->blocked_open) {
if (info->close_delay) {
msleep_interruptible(jiffies_to_msecs(info->close_delay));
}
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
local_irq_restore(flags);
}
/*
* rs_wait_until_sent() --- wait until the transmitter is empty
*/
static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
unsigned long orig_jiffies, char_time;
/*int lsr;*/
volatile QUICC_BD *bdp;
if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
return;
#ifdef maybe
if (info->state->type == PORT_UNKNOWN)
return;
#endif
orig_jiffies = jiffies;
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
* interval should also be less than the timeout.
*
* Note: we have to use pretty tight timings here to satisfy
* the NIST-PCTS.
*/
char_time = 1;
if (timeout)
char_time = min(char_time, (unsigned long)timeout);
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
printk("jiff=%lu...", jiffies);
#endif
/* We go through the loop at least once because we can't tell
* exactly when the last character exits the shifter. There can
* be at least two characters waiting to be sent after the buffers
* are empty.
*/
do {
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
#endif
/* current->counter = 0; make us low-priority */
msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
break;
if (timeout && ((orig_jiffies + timeout) < jiffies))
break;
/* The 'tx_cur' is really the next buffer to send. We
* have to back up to the previous BD and wait for it
* to go. This isn't perfect, because all this indicates
* is the buffer is available. There are still characters
* in the CPM FIFO.
*/
bdp = info->tx_cur;
if (bdp == info->tx_bd_base)
bdp += (TX_NUM_FIFO-1);
else
bdp--;
} while (bdp->status & BD_SC_READY);
current->state = TASK_RUNNING;
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
}
/*
* rs_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
static void rs_360_hangup(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
struct serial_state *state = info->state;
if (serial_paranoia_check(info, tty->name, "rs_hangup"))
return;
state = info->state;
rs_360_flush_buffer(tty);
shutdown(info);
info->event = 0;
state->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
info->tty = 0;
wake_up_interruptible(&info->open_wait);
}
/*
* ------------------------------------------------------------
* rs_open() and friends
* ------------------------------------------------------------
*/
static int block_til_ready(struct tty_struct *tty, struct file * filp,
ser_info_t *info)
{
#ifdef DO_THIS_LATER
DECLARE_WAITQUEUE(wait, current);
#endif
struct serial_state *state = info->state;
int retval;
int do_clocal = 0;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
#else
return -EAGAIN;
#endif
}
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
* If this is an SMC port, we don't have modem control to wait
* for, so just get out here.
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR)) ||
!(info->state->smc_scc_num & NUM_IS_SCC)) {
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
if (tty->termios->c_cflag & CLOCAL)
do_clocal = 1;
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
* this loop, state->count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
#ifdef DO_THIS_LATER
add_wait_queue(&info->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready before block: ttys%d, count = %d\n",
state->line, state->count);
#endif
local_irq_disable();
if (!tty_hung_up_p(filp))
state->count--;
local_irq_enable();
info->blocked_open++;
while (1) {
local_irq_disable();
if (tty->termios->c_cflag & CBAUD)
serial_out(info, UART_MCR,
serial_inp(info, UART_MCR) |
(UART_MCR_DTR | UART_MCR_RTS));
local_irq_enable();
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(info->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
break;
}
if (!(info->flags & ASYNC_CLOSING) &&
(do_clocal || (serial_in(info, UART_MSR) &
UART_MSR_DCD)))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
if (!tty_hung_up_p(filp))
state->count++;
info->blocked_open--;
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
#endif /* DO_THIS_LATER */
if (retval)
return retval;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
static int get_async_struct(int line, ser_info_t **ret_info)
{
struct serial_state *sstate;
sstate = rs_table + line;
if (sstate->info) {
sstate->count++;
*ret_info = (ser_info_t *)sstate->info;
return 0;
}
else {
return -ENOMEM;
}
}
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
static int rs_360_open(struct tty_struct *tty, struct file * filp)
{
ser_info_t *info;
int retval, line;
line = tty->index;
if ((line < 0) || (line >= NR_PORTS))
return -ENODEV;
retval = get_async_struct(line, &info);
if (retval)
return retval;
if (serial_paranoia_check(info, tty->name, "rs_open"))
return -ENODEV;
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open %s, count = %d\n", tty->name, info->state->count);
#endif
tty->driver_data = info;
info->tty = tty;
/*
* Start up serial port
*/
retval = startup(info);
if (retval)
return retval;
retval = block_til_ready(tty, filp, info);
if (retval) {
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open returning after block_til_ready with %d\n",
retval);
#endif
return retval;
}
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open %s successful...", tty->name);
#endif
return 0;
}
/*
* /proc fs routines....
*/
static inline int line_info(char *buf, struct serial_state *state)
{
#ifdef notdef
struct async_struct *info = state->info, scr_info;
char stat_buf[30], control, status;
#endif
int ret;
ret = sprintf(buf, "%d: uart:%s port:%X irq:%d",
state->line,
(state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC",
(unsigned int)(state->port), state->irq);
if (!state->port || (state->type == PORT_UNKNOWN)) {
ret += sprintf(buf+ret, "\n");
return ret;
}
#ifdef notdef
/*
* Figure out the current RS-232 lines
*/
if (!info) {
info = &scr_info; /* This is just for serial_{in,out} */
info->magic = SERIAL_MAGIC;
info->port = state->port;
info->flags = state->flags;
info->quot = 0;
info->tty = 0;
}
local_irq_disable();
status = serial_in(info, UART_MSR);
control = info ? info->MCR : serial_in(info, UART_MCR);
local_irq_enable();
stat_buf[0] = 0;
stat_buf[1] = 0;
if (control & UART_MCR_RTS)
strcat(stat_buf, "|RTS");
if (status & UART_MSR_CTS)
strcat(stat_buf, "|CTS");
if (control & UART_MCR_DTR)
strcat(stat_buf, "|DTR");
if (status & UART_MSR_DSR)
strcat(stat_buf, "|DSR");
if (status & UART_MSR_DCD)
strcat(stat_buf, "|CD");
if (status & UART_MSR_RI)
strcat(stat_buf, "|RI");
if (info->quot) {
ret += sprintf(buf+ret, " baud:%d",
state->baud_base / info->quot);
}
ret += sprintf(buf+ret, " tx:%d rx:%d",
state->icount.tx, state->icount.rx);
if (state->icount.frame)
ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
if (state->icount.parity)
ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
if (state->icount.brk)
ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
if (state->icount.overrun)
ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
ret += sprintf(buf+ret, " %s\n", stat_buf+1);
#endif
return ret;
}
int rs_360_read_proc(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
int i, len = 0;
off_t begin = 0;
len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
for (i = 0; i < NR_PORTS && len < 4000; i++) {
len += line_info(page + len, &rs_table[i]);
if (len+begin > off+count)
goto done;
if (len+begin < off) {
begin += len;
len = 0;
}
}
*eof = 1;
done:
if (off >= len+begin)
return 0;
*start = page + (begin-off);
return ((count < begin+len-off) ? count : begin+len-off);
}
/*
* ---------------------------------------------------------------------
* rs_init() and friends
*
* rs_init() is called at boot-time to initialize the serial driver.
* ---------------------------------------------------------------------
*/
/*
* This routine prints out the appropriate serial driver version
* number, and identifies which options were configured into this
* driver.
*/
static _INLINE_ void show_serial_version(void)
{
printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
}
/*
* The serial console driver used during boot. Note that these names
* clash with those found in "serial.c", so we currently can't support
* the 16xxx uarts and these at the same time. I will fix this to become
* an indirect function call from tty_io.c (or something).
*/
#ifdef CONFIG_SERIAL_CONSOLE
/*
* Print a string to the serial port trying not to disturb any possible
* real use of the port...
*/
static void my_console_write(int idx, const char *s,
unsigned count)
{
struct serial_state *ser;
ser_info_t *info;
unsigned i;
QUICC_BD *bdp, *bdbase;
volatile struct smc_uart_pram *up;
volatile u_char *cp;
ser = rs_table + idx;
/* If the port has been initialized for general use, we have
* to use the buffer descriptors allocated there. Otherwise,
* we simply use the single buffer allocated.
*/
if ((info = (ser_info_t *)ser->info) != NULL) {
bdp = info->tx_cur;
bdbase = info->tx_bd_base;
}
else {
/* Pointer to UART in parameter ram.
*/
/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
/* Get the address of the host memory buffer.
*/
bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
}
/*
* We need to gracefully shut down the transmitter, disable
* interrupts, then send our bytes out.
*/
/*
* Now, do each character. This is not as bad as it looks
* since this is a holding FIFO and not a transmitting FIFO.
* We could add the complexity of filling the entire transmit
* buffer, but we would just wait longer between accesses......
*/
for (i = 0; i < count; i++, s++) {
/* Wait for transmitter fifo to empty.
* Ready indicates output is ready, and xmt is doing
* that, not that it is ready for us to send.
*/
while (bdp->status & BD_SC_READY);
/* Send the character out.
*/
cp = bdp->buf;
*cp = *s;
bdp->length = 1;
bdp->status |= BD_SC_READY;
if (bdp->status & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
/* if a LF, also do CR... */
if (*s == 10) {
while (bdp->status & BD_SC_READY);
/* cp = __va(bdp->buf); */
cp = bdp->buf;
*cp = 13;
bdp->length = 1;
bdp->status |= BD_SC_READY;
if (bdp->status & BD_SC_WRAP) {
bdp = bdbase;
}
else {
bdp++;
}
}
}
/*
* Finally, Wait for transmitter & holding register to empty
* and restore the IER
*/
while (bdp->status & BD_SC_READY);
if (info)
info->tx_cur = (QUICC_BD *)bdp;
}
static void serial_console_write(struct console *c, const char *s,
unsigned count)
{
#ifdef CONFIG_KGDB
/* Try to let stub handle output. Returns true if it did. */
if (kgdb_output_string(s, count))
return;
#endif
my_console_write(c->index, s, count);
}
/*void console_print_68360(const char *p)
{
const char *cp = p;
int i;
for (i=0;cp[i]!=0;i++);
serial_console_write (p, i);
//Comment this if you want to have a strict interrupt-driven output
//rs_fair_output();
return;
}*/
#ifdef CONFIG_XMON
int
xmon_360_write(const char *s, unsigned count)
{
my_console_write(0, s, count);
return(count);
}
#endif
#ifdef CONFIG_KGDB
void
putDebugChar(char ch)
{
my_console_write(0, &ch, 1);
}
#endif
/*
* Receive character from the serial port. This only works well
* before the port is initialized for real use.
*/
static int my_console_wait_key(int idx, int xmon, char *obuf)
{
struct serial_state *ser;
u_char c, *cp;
ser_info_t *info;
QUICC_BD *bdp;
volatile struct smc_uart_pram *up;
int i;
ser = rs_table + idx;
/* Get the address of the host memory buffer.
* If the port has been initialized for general use, we must
* use information from the port structure.
*/
if ((info = (ser_info_t *)ser->info))
bdp = info->rx_cur;
else
/* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */
bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
/* Pointer to UART in parameter ram.
*/
/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
/*
* We need to gracefully shut down the receiver, disable
* interrupts, then read the input.
* XMON just wants a poll. If no character, return -1, else
* return the character.
*/
if (!xmon) {
while (bdp->status & BD_SC_EMPTY);
}
else {
if (bdp->status & BD_SC_EMPTY)
return -1;
}
cp = (char *)bdp->buf;
if (obuf) {
i = c = bdp->length;
while (i-- > 0)
*obuf++ = *cp++;
}
else {
c = *cp;
}
bdp->status |= BD_SC_EMPTY;
if (info) {
if (bdp->status & BD_SC_WRAP) {
bdp = info->rx_bd_base;
}
else {
bdp++;
}
info->rx_cur = (QUICC_BD *)bdp;
}
return((int)c);
}
static int serial_console_wait_key(struct console *co)
{
return(my_console_wait_key(co->index, 0, NULL));
}
#ifdef CONFIG_XMON
int
xmon_360_read_poll(void)
{
return(my_console_wait_key(0, 1, NULL));
}
int
xmon_360_read_char(void)
{
return(my_console_wait_key(0, 0, NULL));
}
#endif
#ifdef CONFIG_KGDB
static char kgdb_buf[RX_BUF_SIZE], *kgdp;
static int kgdb_chars;
unsigned char
getDebugChar(void)
{
if (kgdb_chars <= 0) {
kgdb_chars = my_console_wait_key(0, 0, kgdb_buf);
kgdp = kgdb_buf;
}
kgdb_chars--;
return(*kgdp++);
}
void kgdb_interruptible(int state)
{
}
void kgdb_map_scc(void)
{
struct serial_state *ser;
uint mem_addr;
volatile QUICC_BD *bdp;
volatile smc_uart_t *up;
cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
/* To avoid data cache CPM DMA coherency problems, allocate a
* buffer in the CPM DPRAM. This will work until the CPM and
* serial ports are initialized. At that time a memory buffer
* will be allocated.
* The port is already initialized from the boot procedure, all
* we do here is give it a different buffer and make it a FIFO.
*/
ser = rs_table;
/* Right now, assume we are using SMCs.
*/
up = (smc_uart_t *)&cpmp->cp_dparam[ser->port];
/* Allocate space for an input FIFO, plus a few bytes for output.
* Allocate bytes to maintain word alignment.
*/
mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]);
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase];
bdp->buf = mem_addr;
bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase];
bdp->buf = mem_addr+RX_BUF_SIZE;
up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */
up->smc_maxidl = RX_BUF_SIZE;
}
#endif
static struct tty_struct *serial_console_device(struct console *c, int *index)
{
*index = c->index;
return serial_driver;
}
struct console sercons = {
.name = "ttyS",
.write = serial_console_write,
.device = serial_console_device,
.wait_key = serial_console_wait_key,
.setup = serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = CONFIG_SERIAL_CONSOLE_PORT,
};
/*
* Register console.
*/
long console_360_init(long kmem_start, long kmem_end)
{
register_console(&sercons);
/*register_console (console_print_68360); - 2.0.38 only required a write
function pointer. */
return kmem_start;
}
#endif
/* Index in baud rate table of the default console baud rate.
*/
static int baud_idx;
static const struct tty_operations rs_360_ops = {
.owner = THIS_MODULE,
.open = rs_360_open,
.close = rs_360_close,
.write = rs_360_write,
.put_char = rs_360_put_char,
.write_room = rs_360_write_room,
.chars_in_buffer = rs_360_chars_in_buffer,
.flush_buffer = rs_360_flush_buffer,
.ioctl = rs_360_ioctl,
.throttle = rs_360_throttle,
.unthrottle = rs_360_unthrottle,
/* .send_xchar = rs_360_send_xchar, */
.set_termios = rs_360_set_termios,
.stop = rs_360_stop,
.start = rs_360_start,
.hangup = rs_360_hangup,
/* .wait_until_sent = rs_360_wait_until_sent, */
/* .read_proc = rs_360_read_proc, */
.tiocmget = rs_360_tiocmget,
.tiocmset = rs_360_tiocmset,
};
static int __init rs_360_init(void)
{
struct serial_state * state;
ser_info_t *info;
void *mem_addr;
uint dp_addr, iobits;
int i, j, idx;
ushort chan;
QUICC_BD *bdp;
volatile QUICC *cp;
volatile struct smc_regs *sp;
volatile struct smc_uart_pram *up;
volatile struct scc_regs *scp;
volatile struct uart_pram *sup;
/* volatile immap_t *immap; */
serial_driver = alloc_tty_driver(NR_PORTS);
if (!serial_driver)
return -1;
show_serial_version();
serial_driver->name = "ttyS";
serial_driver->major = TTY_MAJOR;
serial_driver->minor_start = 64;
serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
serial_driver->subtype = SERIAL_TYPE_NORMAL;
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
baud_idx | CS8 | CREAD | HUPCL | CLOCAL;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &rs_360_ops);
if (tty_register_driver(serial_driver))
panic("Couldn't register serial driver\n");
cp = pquicc; /* Get pointer to Communication Processor */
/* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */
/* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O.
*/
/* The "standard" configuration through the 860.
*/
/* immap->im_ioport.iop_papar |= 0x00fc; */
/* immap->im_ioport.iop_padir &= ~0x00fc; */
/* immap->im_ioport.iop_paodr &= ~0x00fc; */
cp->pio_papar |= 0x00fc;
cp->pio_padir &= ~0x00fc;
/* cp->pio_paodr &= ~0x00fc; */
/* Since we don't yet do modem control, connect the port C pins
* as general purpose I/O. This will assert CTS and CD for the
* SCC ports.
*/
/* FIXME: see 360um p.7-365 and 860um p.34-12
* I can't make sense of these bits - mleslie*/
/* immap->im_ioport.iop_pcdir |= 0x03c6; */
/* immap->im_ioport.iop_pcpar &= ~0x03c6; */
/* cp->pio_pcdir |= 0x03c6; */
/* cp->pio_pcpar &= ~0x03c6; */
/* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and
* BRG4 to SCC3.
*/
cp->si_sicr &= ~0x00ffff00;
cp->si_sicr |= 0x001b1200;
#ifdef CONFIG_PP04
/* Frequentis PP04 forced to RS-232 until we know better.
* Port C 12 and 13 low enables RS-232 on SCC3 and SCC4.
*/
immap->im_ioport.iop_pcdir |= 0x000c;
immap->im_ioport.iop_pcpar &= ~0x000c;
immap->im_ioport.iop_pcdat &= ~0x000c;
/* This enables the TX driver.
*/
cp->cp_pbpar &= ~0x6000;
cp->cp_pbdat &= ~0x6000;
#endif
for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
state->magic = SSTATE_MAGIC;
state->line = i;
state->type = PORT_UNKNOWN;
state->custom_divisor = 0;
state->close_delay = 5*HZ/10;
state->closing_wait = 30*HZ;
state->icount.cts = state->icount.dsr =
state->icount.rng = state->icount.dcd = 0;
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
state->icount.overrun = state->icount.brk = 0;
printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n",
i, (unsigned int)(state->irq),
(state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
#ifdef CONFIG_SERIAL_CONSOLE
/* If we just printed the message on the console port, and
* we are about to initialize it for general use, we have
* to wait a couple of character times for the CR/NL to
* make it out of the transmit buffer.
*/
if (i == CONFIG_SERIAL_CONSOLE_PORT)
mdelay(8);
/* idx = PORT_NUM(info->state->smc_scc_num); */
/* if (info->state->smc_scc_num & NUM_IS_SCC) */
/* chan = scc_chan_map[idx]; */
/* else */
/* chan = smc_chan_map[idx]; */
/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */
/* while (cp->cp_cr & CPM_CR_FLG); */
#endif
/* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */
info = &quicc_ser_info[i];
if (info) {
memset (info, 0, sizeof(ser_info_t));
info->magic = SERIAL_MAGIC;
info->line = i;
info->flags = state->flags;
INIT_WORK(&info->tqueue, do_softint, info);
INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
info->state = state;
state->info = (struct async_struct *)info;
/* We need to allocate a transmit and receive buffer
* descriptors from dual port ram, and a character
* buffer area from host mem.
*/
dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO);
/* Allocate space for FIFOs in the host memory.
* (for now this is from a static array of buffers :(
*/
/* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */
/* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */
mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE];
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
* virtual address for us to work with.
*/
bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
info->rx_cur = info->rx_bd_base = bdp;
/* initialize rx buffer descriptors */
for (j=0; j<(RX_NUM_FIFO-1); j++) {
bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
mem_addr += RX_BUF_SIZE;
bdp++;
}
bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
#if defined (CONFIG_UCQUICC) && 1
/* set the transceiver mode to RS232 */
sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */
sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02);
*(uint *)_periph_base = sipex_mode_bits;
/* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */
#endif
}
dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO);
/* Allocate space for FIFOs in the host memory.
*/
/* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */
/* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */
mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE];
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
* virtual address for us to work with.
*/
/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp;
/* initialize tx buffer descriptors */
for (j=0; j<(TX_NUM_FIFO-1); j++) {
bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
bdp->status = BD_SC_INTRPT;
mem_addr += TX_BUF_SIZE;
bdp++;
}
bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
bdp->status = (BD_SC_WRAP | BD_SC_INTRPT);
if (info->state->smc_scc_num & NUM_IS_SCC) {
scp = &pquicc->scc_regs[idx];
sup = &pquicc->pram[info->state->port].scc.pscc.u;
sup->rbase = dp_addr;
sup->tbase = dp_addr;
/* Set up the uart parameters in the
* parameter ram.
*/
sup->rfcr = SMC_EB;
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
* character interrupts. Using idle charater
* time requires some additional tuning.
*/
sup->mrblr = 1;
sup->max_idl = 0;
sup->brkcr = 1;
sup->parec = 0;
sup->frmer = 0;
sup->nosec = 0;
sup->brkec = 0;
sup->uaddr1 = 0;
sup->uaddr2 = 0;
sup->toseq = 0;
{
int i;
for (i=0;i<8;i++)
sup->cc[i] = 0x8000;
}
sup->rccm = 0xc0ff;
/* Send the CPM an initialize command.
*/
chan = scc_chan_map[idx];
/* execute the INIT RX & TX PARAMS command for this channel. */
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
scp->scc_gsmr.w.high = 0;
scp->scc_gsmr.w.low =
(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
/* Disable all interrupts and clear all pending
* events.
*/
scp->scc_sccm = 0;
scp->scc_scce = 0xffff;
scp->scc_dsr = 0x7e7e;
scp->scc_psmr = 0x3000;
/* If the port is the console, enable Rx and Tx.
*/
#ifdef CONFIG_SERIAL_CONSOLE
if (i == CONFIG_SERIAL_CONSOLE_PORT)
scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
}
else {
/* Configure SMCs Tx/Rx instead of port B
* parallel I/O.
*/
up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
up->rbase = dp_addr;
iobits = 0xc0 << (idx * 4);
cp->pip_pbpar |= iobits;
cp->pip_pbdir &= ~iobits;
cp->pip_pbodr &= ~iobits;
/* Connect the baud rate generator to the
* SMC based upon index in rs_table. Also
* make sure it is connected to NMSI.
*/
cp->si_simode &= ~(0xffff << (idx * 16));
cp->si_simode |= (i << ((idx * 16) + 12));
up->tbase = dp_addr;
/* Set up the uart parameters in the
* parameter ram.
*/
up->rfcr = SMC_EB;
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
* character interrupts. Using idle charater
* time requires some additional tuning.
*/
up->mrblr = 1;
up->max_idl = 0;
up->brkcr = 1;
/* Send the CPM an initialize command.
*/
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan,
CPM_CR_INIT_TRX) | CPM_CR_FLG;
#ifdef CONFIG_SERIAL_CONSOLE
if (i == CONFIG_SERIAL_CONSOLE_PORT)
printk("");
#endif
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
sp = &cp->smc_regs[idx];
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
/* Disable all interrupts and clear all pending
* events.
*/
sp->smc_smcm = 0;
sp->smc_smce = 0xff;
/* If the port is the console, enable Rx and Tx.
*/
#ifdef CONFIG_SERIAL_CONSOLE
if (i == CONFIG_SERIAL_CONSOLE_PORT)
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
#endif
}
/* Install interrupt handler.
*/
/* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */
/*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */
request_irq(state->irq, rs_360_interrupt,
IRQ_FLG_LOCK, "ttyS", (void *)info);
/* Set up the baud rate generator.
*/
m360_cpm_setbrg(i, baud_table[baud_idx]);
}
}
return 0;
}
module_init(rs_360_init);
/* This must always be called before the rs_360_init() function, otherwise
* it blows away the port control information.
*/
//static int __init serial_console_setup( struct console *co, char *options)
int serial_console_setup( struct console *co, char *options)
{
struct serial_state *ser;
uint mem_addr, dp_addr, bidx, idx, iobits;
ushort chan;
QUICC_BD *bdp;
volatile QUICC *cp;
volatile struct smc_regs *sp;
volatile struct scc_regs *scp;
volatile struct smc_uart_pram *up;
volatile struct uart_pram *sup;
/* mleslie TODO:
* add something to the 68k bootloader to store a desired initial console baud rate */
/* bd_t *bd; */ /* a board info struct used by EPPC-bug */
/* bd = (bd_t *)__res; */
for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++)
/* if (bd->bi_baudrate == baud_table[bidx]) */
if (CONSOLE_BAUDRATE == baud_table[bidx])
break;
/* co->cflag = CREAD|CLOCAL|bidx|CS8; */
baud_idx = bidx;
ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT;
cp = pquicc; /* Get pointer to Communication Processor */
idx = PORT_NUM(ser->smc_scc_num);
if (ser->smc_scc_num & NUM_IS_SCC) {
/* TODO: need to set up SCC pin assignment etc. here */
}
else {
iobits = 0xc0 << (idx * 4);
cp->pip_pbpar |= iobits;
cp->pip_pbdir &= ~iobits;
cp->pip_pbodr &= ~iobits;
/* Connect the baud rate generator to the
* SMC based upon index in rs_table. Also
* make sure it is connected to NMSI.
*/
cp->si_simode &= ~(0xffff << (idx * 16));
cp->si_simode |= (idx << ((idx * 16) + 12));
}
/* When we get here, the CPM has been reset, so we need
* to configure the port.
* We need to allocate a transmit and receive buffer descriptor
* from dual port ram, and a character buffer area from host mem.
*/
/* Allocate space for two buffer descriptors in the DP ram.
*/
dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO);
/* Allocate space for two 2 byte FIFOs in the host memory.
*/
/* mem_addr = m360_cpm_hostalloc(8); */
mem_addr = (uint)console_fifos;
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
bdp->buf = (char *)mem_addr;
(bdp+1)->buf = (char *)(mem_addr+4);
/* For the receive, set empty and wrap.
* For transmit, set wrap.
*/
bdp->status = BD_SC_EMPTY | BD_SC_WRAP;
(bdp+1)->status = BD_SC_WRAP;
/* Set up the uart parameters in the parameter ram.
*/
if (ser->smc_scc_num & NUM_IS_SCC) {
scp = &cp->scc_regs[idx];
/* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */
sup = &pquicc->pram[ser->port].scc.pscc.u;
sup->rbase = dp_addr;
sup->tbase = dp_addr + sizeof(QUICC_BD);
/* Set up the uart parameters in the
* parameter ram.
*/
sup->rfcr = SMC_EB;
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
* character interrupts. Using idle charater
* time requires some additional tuning.
*/
sup->mrblr = 1;
sup->max_idl = 0;
sup->brkcr = 1;
sup->parec = 0;
sup->frmer = 0;
sup->nosec = 0;
sup->brkec = 0;
sup->uaddr1 = 0;
sup->uaddr2 = 0;
sup->toseq = 0;
{
int i;
for (i=0;i<8;i++)
sup->cc[i] = 0x8000;
}
sup->rccm = 0xc0ff;
/* Send the CPM an initialize command.
*/
chan = scc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
scp->scc_gsmr.w.high = 0;
scp->scc_gsmr.w.low =
(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
/* Disable all interrupts and clear all pending
* events.
*/
scp->scc_sccm = 0;
scp->scc_scce = 0xffff;
scp->scc_dsr = 0x7e7e;
scp->scc_psmr = 0x3000;
scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
else {
/* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */
up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
up->rbase = dp_addr; /* Base of receive buffer desc. */
up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */
up->rfcr = SMC_EB;
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single character interrupts.
*/
up->mrblr = 1; /* receive buffer length */
up->max_idl = 0; /* wait forever for next char */
/* Send the CPM an initialize command.
*/
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
sp = &cp->smc_regs[idx];
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
/* And finally, enable Rx and Tx.
*/
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
}
/* Set up the baud rate generator.
*/
/* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */
m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE);
return 0;
}
/*
* Local variables:
* c-indent-level: 4
* c-basic-offset: 4
* tab-width: 4
* End:
*/
Reference in New Issue View Git Blame Copy Permalink