linux_dsm_epyc7002/drivers/xen/manage.c
Ian Campbell 552717231e xen: do not respond to unknown xenstore control requests
The PV xenbus control/shutdown node is written by the toolstack as a
request to the guest to perform a particular action (shutdown, reboot,
suspend etc). The guest is expected to acknowledge that it will
complete a request by clearing the control node.

Previously it would acknowledge any request, even if it did not know
what to do with it. Specifically in the case where CONFIG_PM_SLEEP is
not enabled the kernel would acknowledge a suspend request even though
it was not actually going to do anything.

Instead make the kernel only acknowledge requests if it is actually
going to do something with it. This will improve the toolstack's
ability to diagnose and deal with failures.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:09 +00:00

334 lines
6.6 KiB
C

/*
* Handle extern requests for shutdown, reboot and sysrq
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/reboot.h>
#include <linux/sysrq.h>
#include <linux/stop_machine.h>
#include <linux/freezer.h>
#include <xen/xen.h>
#include <xen/xenbus.h>
#include <xen/grant_table.h>
#include <xen/events.h>
#include <xen/hvc-console.h>
#include <xen/xen-ops.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/page.h>
#include <asm/xen/hypervisor.h>
enum shutdown_state {
SHUTDOWN_INVALID = -1,
SHUTDOWN_POWEROFF = 0,
SHUTDOWN_SUSPEND = 2,
/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only
report a crash, not be instructed to crash!
HALT is the same as POWEROFF, as far as we're concerned. The tools use
the distinction when we return the reason code to them. */
SHUTDOWN_HALT = 4,
};
/* Ignore multiple shutdown requests. */
static enum shutdown_state shutting_down = SHUTDOWN_INVALID;
#ifdef CONFIG_PM_SLEEP
static int xen_hvm_suspend(void *data)
{
int err;
struct sched_shutdown r = { .reason = SHUTDOWN_suspend };
int *cancelled = data;
BUG_ON(!irqs_disabled());
err = sysdev_suspend(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "xen_hvm_suspend: sysdev_suspend failed: %d\n",
err);
return err;
}
*cancelled = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r);
xen_hvm_post_suspend(*cancelled);
gnttab_resume();
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
sysdev_resume();
return 0;
}
static int xen_suspend(void *data)
{
int err;
int *cancelled = data;
BUG_ON(!irqs_disabled());
err = sysdev_suspend(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
err);
return err;
}
xen_mm_pin_all();
gnttab_suspend();
xen_pre_suspend();
/*
* This hypercall returns 1 if suspend was cancelled
* or the domain was merely checkpointed, and 0 if it
* is resuming in a new domain.
*/
*cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info));
xen_post_suspend(*cancelled);
gnttab_resume();
xen_mm_unpin_all();
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
sysdev_resume();
return 0;
}
static void do_suspend(void)
{
int err;
int cancelled = 1;
shutting_down = SHUTDOWN_SUSPEND;
#ifdef CONFIG_PREEMPT
/* If the kernel is preemptible, we need to freeze all the processes
to prevent them from being in the middle of a pagetable update
during suspend. */
err = freeze_processes();
if (err) {
printk(KERN_ERR "xen suspend: freeze failed %d\n", err);
goto out;
}
#endif
err = dpm_suspend_start(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err);
goto out_thaw;
}
printk(KERN_DEBUG "suspending xenstore...\n");
xs_suspend();
err = dpm_suspend_noirq(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
goto out_resume;
}
if (xen_hvm_domain())
err = stop_machine(xen_hvm_suspend, &cancelled, cpumask_of(0));
else
err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
dpm_resume_noirq(PMSG_RESUME);
if (err) {
printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
cancelled = 1;
}
out_resume:
if (!cancelled) {
xen_arch_resume();
xs_resume();
} else
xs_suspend_cancel();
dpm_resume_end(PMSG_RESUME);
/* Make sure timer events get retriggered on all CPUs */
clock_was_set();
out_thaw:
#ifdef CONFIG_PREEMPT
thaw_processes();
out:
#endif
shutting_down = SHUTDOWN_INVALID;
}
#endif /* CONFIG_PM_SLEEP */
struct shutdown_handler {
const char *command;
void (*cb)(void);
};
static void do_poweroff(void)
{
shutting_down = SHUTDOWN_POWEROFF;
orderly_poweroff(false);
}
static void do_reboot(void)
{
shutting_down = SHUTDOWN_POWEROFF; /* ? */
ctrl_alt_del();
}
static void shutdown_handler(struct xenbus_watch *watch,
const char **vec, unsigned int len)
{
char *str;
struct xenbus_transaction xbt;
int err;
static struct shutdown_handler handlers[] = {
{ "poweroff", do_poweroff },
{ "halt", do_poweroff },
{ "reboot", do_reboot },
#ifdef CONFIG_PM_SLEEP
{ "suspend", do_suspend },
#endif
{NULL, NULL},
};
static struct shutdown_handler *handler;
if (shutting_down != SHUTDOWN_INVALID)
return;
again:
err = xenbus_transaction_start(&xbt);
if (err)
return;
str = (char *)xenbus_read(xbt, "control", "shutdown", NULL);
/* Ignore read errors and empty reads. */
if (XENBUS_IS_ERR_READ(str)) {
xenbus_transaction_end(xbt, 1);
return;
}
for (handler = &handlers[0]; handler->command; handler++) {
if (strcmp(str, handler->command) == 0)
break;
}
/* Only acknowledge commands which we are prepared to handle. */
if (handler->cb)
xenbus_write(xbt, "control", "shutdown", "");
err = xenbus_transaction_end(xbt, 0);
if (err == -EAGAIN) {
kfree(str);
goto again;
}
if (handler->cb) {
handler->cb();
} else {
printk(KERN_INFO "Ignoring shutdown request: %s\n", str);
shutting_down = SHUTDOWN_INVALID;
}
kfree(str);
}
#ifdef CONFIG_MAGIC_SYSRQ
static void sysrq_handler(struct xenbus_watch *watch, const char **vec,
unsigned int len)
{
char sysrq_key = '\0';
struct xenbus_transaction xbt;
int err;
again:
err = xenbus_transaction_start(&xbt);
if (err)
return;
if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) {
printk(KERN_ERR "Unable to read sysrq code in "
"control/sysrq\n");
xenbus_transaction_end(xbt, 1);
return;
}
if (sysrq_key != '\0')
xenbus_printf(xbt, "control", "sysrq", "%c", '\0');
err = xenbus_transaction_end(xbt, 0);
if (err == -EAGAIN)
goto again;
if (sysrq_key != '\0')
handle_sysrq(sysrq_key);
}
static struct xenbus_watch sysrq_watch = {
.node = "control/sysrq",
.callback = sysrq_handler
};
#endif
static struct xenbus_watch shutdown_watch = {
.node = "control/shutdown",
.callback = shutdown_handler
};
static int setup_shutdown_watcher(void)
{
int err;
err = register_xenbus_watch(&shutdown_watch);
if (err) {
printk(KERN_ERR "Failed to set shutdown watcher\n");
return err;
}
#ifdef CONFIG_MAGIC_SYSRQ
err = register_xenbus_watch(&sysrq_watch);
if (err) {
printk(KERN_ERR "Failed to set sysrq watcher\n");
return err;
}
#endif
return 0;
}
static int shutdown_event(struct notifier_block *notifier,
unsigned long event,
void *data)
{
setup_shutdown_watcher();
return NOTIFY_DONE;
}
int xen_setup_shutdown_event(void)
{
static struct notifier_block xenstore_notifier = {
.notifier_call = shutdown_event
};
if (!xen_domain())
return -ENODEV;
register_xenstore_notifier(&xenstore_notifier);
return 0;
}
EXPORT_SYMBOL_GPL(xen_setup_shutdown_event);
subsys_initcall(xen_setup_shutdown_event);